Minolta Di450 User Manual

3-28
5. Selecting the Finishing
Making Copies
Chapter 3


Crease makes a crease in the copy at its center
before it is fed out.

Sizes of paper that can be loaded:
11×17 L, Letter L

Sizes of paper that can be loaded:
11×17 L, Legal L, Letter L
Width 8-1/4 to 11-3/4
Length11to17Make sure to select the correct stapling function
when making copies with the Crease function if
you want to make a stapled copy set.
Number of sheets : 2 to 15
NOTE
Even if Staple is previously set to a corner or side position,...

3-29
5. Selecting the Finishing
Making Copies
Chapter 3

Half-Fold folds the copy in two at its center with
the copy surface on the outside.

Sizes of paper that can be loaded: 11×17 L

Sizes of paper that can be loaded: 11×17 L, Legal L
Width10to11-3/4
Length 14-1/4 to 17
* The finished copy size has a length half that of
the paper loaded in the machine.You can produce a document that looks like below
by combining this function with Staple and Hole
Punch.
Number of sheets : 2 to 10
NOTES
 Half-Fold...

3-30
5. Selecting the Finishing
Making Copies
Chapter 3

Z-Fold folds the copy into three parts with the
copy surface inside as shown below.
Sizes of paper that can be loaded: 11×17L
* The finished copy size has a length half that of
the paper loaded in the machine.This feature comes in handy when you combine it
with Staple and Hole Punch for filing.
Number of sheets:
Z-Fold only: 2 to 10
Z-Folded 5 sheets + unfolded 25 sheets
NOTES
 When Z-Fold is selected, Auto Paper is automatically set.
 Z-Fold...

3-31
5. Selecting the Finishing
Making Copies
Chapter 3
To set Hole Punch, touch [Hole-Punch].
Touch [Enter].5
4003P348EA
6
Downloaded From ManualsPrinter.com Manuals 

3-32
5. Selecting the Finishing
Making Copies
Chapter 3
Loading the Originals
Note the correct direction of the originals if the copies are to be stapled in the Staple Mode.
 
Useful Tip
Refer to the instruction labels on the machine or the Electronic Document Handler.
Staple
Panel Original Placement
Corner Staple 2-Point Staple4002O136AC
Stapling Position
1155O430AA
4002O137AC
Stapling Position
1155O431AA
Stapling Position
4002O138AC
1155O432AA
4002O139AC
Stapling Position
Panel Original Placement...

3-33
5. Selecting the Finishing
Making Copies
Chapter 3
Note the correct direction of the originals if the copies are to be punched using Hole Punch.
 
Hole Punch
Panel Original Placement
1155O568EA
4002O291EB
Punched Hole Position
1155O570EA
4002O292EB
Punched Hole Position
Panel Original Placement
1155O568EA
Punched Hole Position
4002O293EB
1155O570EA
Punched Hole Position
4002O290EB
Downloaded From ManualsPrinter.com Manuals 

3-34
5. Selecting the Finishing
Making Copies
Chapter 3
Auto Dual Function
If a stapling sequence is attempted and the number of sheets is greater than the stapling capacity, Stapling
is automatically canceled and the Finisher is set into the Sort or Group mode, sorting or grouping copies
using the Auto Dual function (but no stapling action takes place).
Though the Top Offset Tray can hold only up to 100 sheets, the Auto Dual function permits making
copies of up to 2,600 sheets.


Auto Dual Function in...

3-35
5. Selecting the Finishing
Making Copies
Chapter 3

*Only11×17L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (11×17L and
other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded
and unfolded copies.
NOTE
When a Finisher FN-105, Finisher FN-106, or Mailbin Finisher is mounted, the Auto Dual function will
not function.
Note on Stapling
When copies are made using the stapling function, the stapled copy sets may not be neatly...

3-36
Making Copies
Chapter 3
6. Selecting the Original Copy Type
When you touch [Orig. Copy] on the Touch Panel, a screen appears that allows you to set the orig.
copy type.
Original Copy Types






4002P220AA
Single-Sided Single-Sided
This setting allows you to make 1-sided copies
from originals.
Double-Sided Single-Sided

This setting allows you to make 1-sided copies from
originals.

4002P221AA
Orig. Copy
Orig. Copy
4002P222AA
Single-Sided Double-Sided
This setting allows you to make 2-sided copies...

3-37
6. Selecting the Original Copy Type
Making Copies
Chapter 3
4002P228AA
Single-Sided Single-[4in1]
Select Single-Sided Single-[4in1] to make a
1-sided copy, through reduction, from four
originals side-by-side.


Double-Sided Single-[4in1]

Select Double-Sided Single-[4in1] to make a 1-
sided copy, through reduction, from two originals
side-by-side.



4002P229AA
Orig. Copy
Orig.Copy
4002P230AA
Single-Sided Double-[4in1]
Select Single-Sided Double-[4in1] to make a
2-sided copy, through reduction, from...