Home > MikroTik > Router > MikroTik Router OS V3.0 User Manual

MikroTik Router OS V3.0 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual MikroTik Router OS V3.0 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1 MikroTik manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 491
    							[admin@MikroTik] interface> printFlags: X - disabled, D - dynamic, R - running# NAME TYPE MTU0 R ether1 ether 15001 R bridge1 bridge 15002 R ether2 ether 15003 R wlan1 wlan 1500[admin@MikroTik] interface>
    Traffic Monitoring
    Command name:/interface monitor-traffic
    Description
     
    	 	
     
     	
     
    
    	 	
      
    
    
    Property Description
    received-bits-per-second(read-only: integer) - number of bits that interface has received in one
    second
    received-packets-per-second(read-only: integer) - number of packets that interface has received
    in one second
    sent-bits-per-second(read-only: integer) - number of bits that interface has sent in one second
    sent-packets-per-second(read-only: integer) - number of packets that interface has sent in one
    second
    Notes
     
       
    
    	 	
      
    
     	
     
     	 
    
      (	 
    	 	
     
     	 
    
    	 	
     
     
    
    
    	  
    
    	 
    	
    Example
    
     
    
    	 
    
    
    
    /interface monitor-traffic ether1,aggregatereceived-packets-per-second: 9 11received-bits-per-second: 4.39kbps 6.19kbpssent-packets-per-second: 16 17sent-bits-per-second: 101kbps 101kbps-- [Q quit|D dump|C-z pause]
    Page 90 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							GPRS PCMCIA
    Document revision 1.1 (February 6, 2008, 2:56 GMT)
    This document applies to MikroTik RouterOS V3.0
    Table of Contents
    TableofContents
    HowtomakeaGPRSconnection
    Description
    Example
    How to make a GPRS connection
    Description
    A
      
     	 
    	
    
     
    	
      	 
     	 	  
     
    
    
    
     
    
    
    
      	(		 
      	(
    	 
       
    
     ( *
     
     	  	
     
    
    
      
     
       
    
    ( 
     I$! &I
    	 $	
     	 !( 	
      
    	 	
     
    
    
    
     
    
    
    
    
    Example
    •$ 
     I$! $33*+ 	 &
      !* 	 
    
     
     
     
    
     
     
     
     	
     	
     
     	
    
    	
       	 
     
     	 		 *
     
     	 
      
    
    !
        I$! (
    [admin@MikroTik] port> print# NAME USED-BY BAUD-RATE0 serial0 Serial Console 1152001 serial19600[admin@MikroTik] port>
    •F
    
     
     
       	7
    
    	 &
     
     	 $*9  2))2 
    /system serial-terminal serial1
    AT+CPIN=”3663”
    9    enable 0[admin@MikroTik] interface ppp-client> mo 0status: dialing...
    Page 91 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							status: link established
    status: authenticateduptime: 0sidle-time: 0s
    status: authenticateduptime: 1sidle-time: 1s
    status: connecteduptime: 2sidle-time: 2s[admin@MikroTik] interface ppp-client>
    3 
     *$ 	
    [admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 192.168.0.5/24 192.168.0.0 192.168.0.255 ether11 D 10.40.205.168/32 212.93.96.65 0.0.0.0 ppp-out1[admin@MikroTik] ip address>
    Page 92 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							ISDN (Integrated Services Digital Network)
    Interface
    Document revision 1.2 (February 6, 2008, 2:56 GMT)
    This document applies to MikroTik RouterOS V3.0
    Table of Contents
    TableofContents
    GeneralInformation
    Summary
    Specifications
    AdditionalDocuments
    ISDNHardwareandSoftwareInstallation
    Description
    PropertyDescription
    ISDNChannels
    MSNandEAZnumbers
    ISDNClientInterfaceConfiguration
    Description
    PropertyDescription
    Example
    ISDNServerInterfaceConfiguration
    Description
    PropertyDescription
    Example
    ISDNExamples
    ISDNDial-out
    ISDNDial-in
    ISDNBackup
    General Information
    Summary
      
     	
     	
     	 	
     *!59 
    
      	
     
      	 	
     *!59 (  	
    
     
    
    
    	  	7
     
    
    
    
     	  
     	 	7
    7	
      	 	
    
    
     
    
    
    
     &	
    
     	
    	 
      
    45 &(  
     *!$ 	
       	 
     	
     	
    	  
    
    
    
    Specifications
    Packages required:isdn, ppp
    License required:level1
    Home menu level:/interface isdn-server, /interface isdn-client
    Standards and Technologies:PPP(RFC1661)
    Hardware usage:Not significant
    Page 93 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							Additional Documents
    •$$$(*!59
    •#3:.
    						
    							 
      	(		 *!59 	
    
     	
      ( 
     
    
      
    
    	
      	
    
    
    	 
    	 ! & 	
      
     F   	( 
     *!59 	
    
     	
     
      
    
    
    
       	
     *!59 
    
    	 
     
     
     	(		 
     
    
        
    
    [admin@MikroTik] isdn-channels> printFlags: X - disabled, E - exclusive# NAME CHANNEL DIR.. TYPE PHONE0 channel1 01 channel2 1[admin@MikroTik] isdn-channels>
    *!59 	
    
     	 ( 	 
     $$$ 	 
     +
     
      *!59 
    
    	 	
      
     
     	
    
     	
    
     
     
     
     
    
    	 	
      
    	  
    	
     	
    
     	
     	 
     *
     	
     
    	
     ( *!59
    	
    
      
     	(		    	
     *!59 
    
    	
    MSN and EAZ numbers
    *
     F7*!59 	  	
     	
      
    	
     
     *!59 
     
     	
     *!59 
     # 	 	
     *!59
    
      	( 
     
     /-:D.GN 	
     /-:D.GC F	  
     
     	
       
     	 
     *!59
    
      
     	  
     	 
     ! 9 &!9
    + 	 
     		
     
    
      F+R 
    
        
     I	
     *!59 
    
    
     F+R 
    
    	
       
     	
    
     
     	 
     
     
      
     8 (
    # 	7
     *!59 
    
    	 !91F+R 
      
     
    
     
     
     &
     	
     
     #
    	7
     *!59 
    
    	 !91F+R 
      
     
     
     
    	
       	
     *  	
    
     	
      !91F+R 
     	( 
     	
     &
      
     	
    
    # 	   *!59 
     	 
     /-:D.GN 	
     /-:D.GC   
      	7
     (
    
     	
     
     	 
     /-:D.GC  
    !&21+)(	  !9 
     *
     	 
     !9  4
     
    
     
    
    ISDN Client Interface Configuration
    Home menu level:/interface isdn-client
    Description
     *!59 
    
       
     
    
    
     
     
     	7
     ( &	 *!$ (	 *!59  
      	
     *!59
    	7
     
    
    
    
      
     *!59 	7
     
    	
    
     
     
     
     
    
    Property Description
    add-default-route(yes|no; default:no) - add default route to remote host on connect
    allow(multiple choice: mschap2,mschap1,chap,pap; default:mschap2, mschap1, chap, pap) -
    the protocol to allow the client to use for authentication
    bundle-128K(yes|no; default:yes) - use both channels instead of just one
    dial-on-demand(yes|no; default:no) - use dialing on demand
    l2-protocol(hdlc|x75i|x75ui|x75bui; default:hdlc) - level 2 protocol to be used
    mru(integer; default:1500) - Maximum Receive Unit
    Page 95 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							msn(integer; default:) - MSN/EAZ of ISDN line provided by the line operator
    mtu(integer; default:1500) - Maximum Transmission Unit
    name(name; default:isdn-outN) - interface name
    password(text) - password that will be provided to the remote server
    phone(integer; default:) - phone number to dial
    profile(name; default:default) - profile to use when connecting to the remote server
    use-peer-dns(yes|no; default:no) - use or not peer DNS
    user(text) - user name that will be provided to the remote server
    Example
    *!59 
    
     
    
    	 	
      	 
     
    	
    
    [admin@MikroTik] interface isdn-client> add msn=142 user=test \\... password=test phone=144 bundle-128K=no[admin@MikroTik] interface isdn-client> printFlags: X - disabled, R - running0 X name=isdn-out1 mtu=1500 mru=1500 msn=142 user=testpassword=test profile=default phone=144 l2-protocol=hdlcbundle-128K=no dial-on-demand=no add-default-route=no use-peer-dns=no[admin@MikroTik] interface isdn-client>
    ISDN Server Interface Configuration
    Home menu level:/interface isdn-client
    Description
    *!59 (   
     	
     
     	7
     
    
    
    
      *!59 
    
    
    Property Description
    authentication(pap|chap|mschap1|mschap2; default:mschap2, mschap1, chap, pap) - used
    authentication
    bundle-128K(yes|no; default:yes) - use both channels instead of just one
    l2-protocol(hdlc|x75i|x75ui|x75bui; default:hdlc) - level 2 protocol to be used
    mru(integer; default:1500) - Maximum Receive Unit
    msn(integer; default:) - MSN/EAZ of ISDN line provided by the line operator
    mtu(integer; default:1500) - Maximum Transmission Unit
    name(name; default:isdn-inN) - interface name
    phone(integer; default:) - phone number to dial
    profile(name; default:default) - profile to use when connecting to the remote server
    Example
    *!59 ( 
    
    	 	
      	 
     
    	
    
    [admin@MikroTik] interface isdn-server> add msn=142 bundle-128K=no
    Page 96 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							[admin@MikroTik] interface isdn-server> printFlags: X - disabled, R - running0 X name=isdn-in1 mtu=1500 mru=1500 msn=142authentication=mschap2,chap,pap profile=default l2-protocol=x75buibundle-128K=no[admin@MikroTik] interface isdn-server>
    ISDN Examples
    ISDN Dial-out
    5	7
     *!59 
    
    
    
     	 	 	 
     
     
    
    
     
     	 
     	7
     ( &*!$% (	 *!59
    A
    % 	    
     
      	 
     
    	
     
    
    
      	 A+9 
      *!$ (	 *!59 
     #
      	 
     
    
     *!59 	 ( !
      	( 	
     *!59 	 
     	
    C))&7	 
    [admin@MikroTik]> /driver add name=w6692
    9 	
    
    	 	
    
      		 +
      	( 
     
     *!59 	 ( 	  
    
     
    
    [admin@MikroTik] isdn-channels> printFlags: X - disabled, E - exclusive# NAME CHANNEL DIR.. TYPE PHONE0 channel1 01 channel2 1[admin@MikroTik] isdn-channels>
    !    
      	7
    7	
     
     	  *!$ 	
     	
    	
    	 	 	 	
     
     
     
    
    +    
     
    
    
     
     
       
    	
     :.  
    
     
    	
    (
     E *!$% 
    
    
      /-:D /interface isdn-client add name=isdn-isp phone=12345678user=john password=31337!) add-default-route=yes dial-on-demand=yes[admin@MikroTik] > /interface isdn-client printFlags: X - disabled, R - running0 X name=isdn-isp mtu=1500 mru=1500 msn= user=john password=31337!)profile=default phone=12345678 l2-protocol=hdlc bundle-128K=nodial-on-demand=yes add-default-route=yes use-peer-dns=no
    3
     $$$ 
    [admin@MikroTik] ppp profile> printFlags: * - default0 * name=default use-compression=default use-vj-compression=defaultuse-encryption=default only-one=default change-tcp-mss=yes
    1 * name=default-encryption use-compression=defaultuse-vj-compression=default use-encryption=yes only-one=defaultchange-tcp-mss=yes[admin@Mikrotik] ppp profile> set default idle-timeout=30s
    *    
     	
     
    
    
     	 
     
      	 	 	 
     
    
     
     
    
    
    
    
     .
    + 
    	
     	
      
     
    	 
     
    
    	
    [admin@MikroTik] /interface set isdn-isp disabled=no
    E 	
     
    
     
     
    
    
    
     
    	
     
     
     
     	
    
    Page 97 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							[admin@MikroTik] /interface isdn-client monitor isdn-isp
    ISDN Dial-in
    5	7
     *!59 
    
    
    
     	 
     
    
     
     
    
    
     
      
     (	 *!59
    A
      	    
     
     	 
      	
    
     
    
     *!59 	  
     
    
    
    E 	( 	
     F
    
    
     	 
    
    
     
     
     A+9 	
     	
     *!59 	 
    
    
     
     
     *!59 
     #
     
     	 
     
    
     *!59 	 ( !
      	( 	
     *!59 	 
     	
     ,#3 
    [admin@MikroTik] /driver add name=hfc
    9 	
    
    	 	
    
      		 +
      	( 
     
     *!59 	 ( 	  
    
     
     
    
    [admin@MikroTik] isdn-channels> printFlags: X - disabled, E - exclusive# NAME CHANNEL DIR.. TYPE PHONE0 channel1 01 channel2 1[admin@MikroTik] isdn-channels>
    + 	
     
    
     *!59 
    
    	 	
     
     
     
     
     
     	
    [admin@MikroTik] interface isdn-server> add msn=7542159 \\... authentication=chap,pap bundle-128K=no[admin@MikroTik] interface isdn-server> printFlags: X - disabled0 X name=isdn-in1 mtu=1500 mru=1500 msn=7542159 authentication=chap,papprofile=default l2-protocol=hldc bundle-128K=no
    3
     $$$ 
    
    
     	
     	  
     
    % 	
    		
    [admin@MikroTik] ppp profile> printFlags: * - default0 * name=default use-compression=default use-vj-compression=defaultuse-encryption=default only-one=default change-tcp-mss=yes
    1 * name=default-encryption use-compression=defaultuse-vj-compression=default use-encryption=yes only-one=defaultchange-tcp-mss=yes[admin@Mikrotik] ppp profile> set default idle-timeout=5s local-address=10.99.8.1 \\... remote-address=10.9.88.1
    +  %4
    % 
     
     
    %  	
    		 +
     
    	
     
     	  %:/::NM%
    [admin@MikroTik] ppp secret> add name=john password=31337!) service=isdn[admin@MikroTik] ppp secret> printFlags: X - disabled# NAME SERVICE CALLER-ID PASSWORD PROFILE REMOTE-ADDRESS0 john isdn 31337!) default[admin@MikroTik] ppp secret>
    3 
     
    	
      
     *!59 ( 
    
    	 	
     	
      
     	
    [admin@MikroTik] interface isdn-server> monitor isdn-in1
    status: Waiting for call...
    ISDN Backup
    )	 
     	  
      	 
      
     
     	
    
    	
     	 
    
    
    
     (
      	 	
     
    Page 98 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    							# 	  
     
     
      
     
     	
     	
    	
    	 
    
    
     
     	 
    
     
    
    	 
    
    
    
    
     
      ! 	 	  	 
     	
     
    
     
    	
     
    
     
     
    	
      
     
    
    
    
     7
    
    
    	
     	
     	 
      
     
     
    
    	
    
      	
     	   
     	  
     	 
     *
     
     	 %  	
     *!59
    
    
    
    
       
     	 	 
    	
    	 F
    
    
     
    
    
    
     E 	
     (  
    
    	  
    
    *!59 
    
    
    
     	
    
    
      
     7 $$$  	 6
     
     F
    
    
     	 &
     
     
    / 	
    
    
     
    
    
     
     
    - 
     ---- & 
     
     
     
    /  
    	 	
     *!59 
    
    
    
     7	 	
    
     
     
    
    
     
    	
    
     
     
     
     -
    E 
      
     
     
    	
     
      	 
     	 4
     
     
     
     
     
     	
      
    
     
    
    
      
    
     
    
    
     	 
     	  
     
     
     
     
    
    *
     
     	 
    
    
    	  	
     *!59 
    
    
    
     
     
     	 		
    
     
     	
      
    
    
      	
    	
    	 
    
    
    
     # 
     
    
    
    
      
      
     
      
     	 
    
    •+
     
      
     
     
      *!59 
    
    
    
       *!59 
     *!59 	 ( 
      	
    [admin@MikroTik] driver> add name=hfc
     $$$ 
    
    
    
     
     	( 	 
      	 
     
     
     
     	
     
    
    Page 99 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners. 
    						
    All MikroTik manuals Comments (0)