MikroTik Router OS V3.0 User Manual
Here you can view all the pages of manual MikroTik Router OS V3.0 User Manual. The MikroTik manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 141
Sangoma Synchronous Cards
Document revision 0.5 (February 6, 2008, 2:56 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
GeneralInformation
Summary
Specifications
SynchronousInterfaceConfiguration
Description
PropertyDescription
General Information
Summary
!
!
6+9
•!
!
Page 142
chdlc-keepalive(time; default:10s) - Cisco-HDLC keepalive interval in seconds clock-rate(integer; default:64000) - internal clock rate in bps clock-source(internal|external; default:external) - specifies whether the card should rely on supplied clock or generate its own frame-relay-dce(yes|no; default:no) - specifies whether the device operates in Data Communication Equipment mode. The value yes is suitable only for T1 models frame-relay-lmi-type(ansi|ccitt; default:ansi) - Frame Relay Line Management...
Page 143
LMC/SBEI Synchronous Interfaces
Document revision 0.4 (February 6, 2008, 2:56 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
GeneralInformation
Summary
Specifications
SynchronousInterfaceConfiguration
Description
PropertyDescription
ConnectingtwoMTroutersviaT1crossover
General Information
Summary
!
A
3 &A 31!)F *
•A 31!)F*
$3*7/: $3* : &
5!: DD N:G
•A 31!)F*
$3*7//F/ $3*...
Page 144
particular interface is connected to clock-rate(integer; default:64000) - internal clock rate in bps clock-source(internal|external; default:external) - specifies whether the card should rely on supplied clock or generate its own crc32(yes | no; default:no) - Specifies whether to use CRC32 error correction algorithm or not frame-relay-dce(yes|no; default:no) - specifies whether the device operates in Data Communication Equipment mode. The value yes is suitable only for T1 models...
Page 145
![Page 145
•
3!
[admin@R1] > /ip address add address=10.10.10.1/24 interface=sbe1
•
3&
[admin@R1] > /ip address add address=10.10.10.2/24 interface=sbe1
#
3!
[admin@R1] > /ping 10.10.10.210.10.10.2 64 byte ping: ttl=64 time=7 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms5 packets transmitted, 5 packets received, 0%...](http://img.usermanuals.tech/thumb/5890/103206/w300_index.html@nav=null&now=get&message=Downloading&file=refman3.0-144.png "Page 145
•
3!
[admin@R1] > /ip address add address=10.10.10.1/24 interface=sbe1
•
3&
[admin@R1] > /ip address add address=10.10.10.2/24 interface=sbe1
#
3!
[admin@R1] > /ping 10.10.10.210.10.10.2 64 byte ping: ttl=64 time=7 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms5 packets transmitted, 5 packets received, 0%...")
• 3! [admin@R1] > /ip address add address=10.10.10.1/24 interface=sbe1 • 3& [admin@R1] > /ip address add address=10.10.10.2/24 interface=sbe1 # 3! [admin@R1] > /ping 10.10.10.210.10.10.2 64 byte ping: ttl=64 time=7 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms10.10.10.2 64 byte ping: ttl=64 time=8 ms5 packets transmitted, 5 packets received, 0%...
Page 146
Wireless Client and Wireless Access Point Manual Document revision 2.3 (January 22, 2008, 8:53 GMT) This document applies to MikroTik RouterOS V3.0 Table of Contents TableofContents GeneralInformation Summary QuickSetupGuide Specifications Description WirelessInterfaceConfiguration Description PropertyDescription Notes Example InterfaceMonitor Description PropertyDescription Notes NstremeSettings Description PropertyDescription Notes Example Nstreme2GroupSettings Description PropertyDescription Notes...
Page 147
Example VirtualAccessPointInterface Description PropertyDescription Notes WDSInterfaceConfiguration Description PropertyDescription Notes Example Align Description PropertyDescription CommandDescription Notes Example AlignMonitor Description PropertyDescription Example FrequencyMonitor Description PropertyDescription Example ManualTransmitPowerTable Description PropertyDescription Example NetworkScan Description PropertyDescription Example SecurityProfiles Description PropertyDescription Notes Sniffer...
Page 148
PropertyDescription
CommandDescription
Example
General Information
Summary
+
$
9*3
*FFF
C.- //
(
/.C &
Page 149
9
•
7
7
C.- //
8
*(+* ?B
!( !
*
&
/interface wireless set wlan1 ssid=p2p frequency=5805 band=5ghz \mode=bridge disabled=no
•
C.- //
!( !
*
&
/interface wireless set wlan1 ssid=p2p band=5ghz mode=station...
Page 150
E
7
( 7
7
+7
( +3L
( (
7
9
•Point-to-Point mode- controlled point-to-point mode with one radio on each side
•Dual radio Point-to-Point mode (Nstreme2)- the protocol will use two radios on both sides...
All MikroTik manuals