Home > MikroTik > Router > MikroTik Router OS V3.0 User Manual

MikroTik Router OS V3.0 User Manual

Here you can view all the pages of manual MikroTik Router OS V3.0 User Manual. The MikroTik manuals for Router are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 111

[admin@Mikrotik] ppp secret> add name=backup password=backup service=isdn
+
 *!59 ( 	
 $$$  
  
  
 
 
 

[admin@MikroTik] ppp profile> set default local-address=3.3.3.254remote-address=3.3.3.1[admin@MikroTik] interface isdn-server> add name=backup msn=7801032
+
 *!59 

 
  	 
 
 
 

[admin@MikroTik] interface isdn-client>add name=backup user=backup password=backup phone=7801032 msn=7542159
•
  	( 
 
  
	
 

0 

 ...

Page 112

M3P
Document revision 0.4 (February 6, 2008, 4:21 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
Summary
Specifications
Description
Setup
Description
PropertyDescription
Notes
Example
General Information
Summary
  $	
 $	 $
 &:$ 
2 
 	
	 	
 	  
 
 
 
	
 	( 	
 (	  	
 
	


  	   
 
  
 

 
	 


 
 
	

 O*$ 
	 	
 
 
...

Page 113

	(	 	
 2

Page 114

Page 115

MOXA C101 Synchronous Interface
Document revision 1.3 (February 6, 2008, 2:58 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
GeneralInformation
Summary
Specifications
Description
AdditionalDocuments
SynchronousInterfaceConfiguration
Description
PropertyDescription
Notes
Example
Troubleshooting
Description
SynchronousLinkApplicationExamples
MikroTikRoutertoMikroTikRouter
MikroTikRoutertoCiscoRouter
General Information
Summary
  
 ! 
  B+ 3/./...

Page 116

MOXA C101 PCI variant cabling
  B+ 3/./ $3* 8 

   B+ 3/./ *!+ 	 *
 	
  	 
 
 
 
	
DB25fSignalDirectionV.35m
4RTSOUTC
5CTSIND
6DSRINE
7GND-B
8DCDINF
10TxDBOUTS
11TxDAOUTP
12RxDBINT
13RxDAINR
14TxCBINAA
16TxCAINY
20DTROUTH
22RxCBINX
23RxCAINV
short 9 and 25 pin
Additional Documents
#  
	

 	
 
  B+ 3/./ 

 D1 		
 		 	 
•

11	1
1
13/./
7 
 
 
7
 

	
...

Page 117

clock-source(external|internal|tx-from-rx|tx-internal; default:external) - clock source
frame-relay-dce(yes|no; default:no) - operate or not in DCE mode
frame-relay-lmi-type(ansi|ccitt; default:ansi) - Frame-relay Local Management Interface type:
•ansi- set LMI type to ANSI-617d (also known as Annex A)
•ccitt- set LMI type to CCITT Q933a (also known as Annex A)
ignore-dcd(yes|no; default:no) - ignore or not DCD
line-protocol(cisco-hdlc|frame-relay|sync-ppp; default:sync-ppp) - line protocol name...

Page 118

Description
•#    

	  
  $   
  

	 

 
	
 
 8 
  

 	

•#    
  
 $
3 
 O:< 	
 	
 
 
 

 
  	 
  	
	
Synchronous Link Application Examples
MikroTik Router to MikroTik Router
A
  
 
 
 

 
 
 
  
 


 
 	 	 
 

		
 
 (   B+ 3/./ 	   	 	
 
 

	 ...

Page 119

$Page 119 ( ( *$ [admin@MikroTik] ip address> add address=1.1.1.1/32 interface=wan \\... network=1.1.1.2 broadcast=255.255.255.255 [admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.254/24 10.0.0.254 10.0.0.255 ether21 192.168.0.254/24 192.168.0.254 192.168.0.255 ether12 1.1.1.1/32 1.1.1.2 255.255.255.255 wan[admin@MikroTik] ip address> /ping...$





 (
 	(  *$ 	 	
 
 
 

 

	   	 
[admin@MikroTik] ip address> add address=1.1.1.1/32 interface=wan \\... network=1.1.1.2 broadcast=255.255.255.255
[admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.254/24 10.0.0.254 10.0.0.255 ether21 192.168.0.254/24 192.168.0.254 192.168.0.255 ether12 1.1.1.1/32 1.1.1.2 255.255.255.255 wan[admin@MikroTik] ip address> /ping...

Page 120

$Page 120 ( B+ 3/./ ( ( *$ [admin@MikroTik] ip address> add address 1.1.1.1/32 interface wan \\... network 1.1.1.2 broadcast 255.255.255.255[admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.254/24 10.0.0.254 10.0.0.255 ether21 192.168.0.254/24 192.168.0.254...$

 (   B+ 3/./ 	   	 	
 
 

	   
	 	
 
 





 (
 	(  *$ 	 	
 
 
 

 

	   	 
[admin@MikroTik] ip address> add address 1.1.1.1/32 interface wan \\... network 1.1.1.2 broadcast 255.255.255.255[admin@MikroTik] ip address> printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.254/24 10.0.0.254 10.0.0.255 ether21 192.168.0.254/24 192.168.0.254...

Start reading MikroTik Router OS V3.0 User Manual
All MikroTik manuals