Home > MikroTik > Router > MikroTik Router OS V3.0 User Manual

MikroTik Router OS V3.0 User Manual

Here you can view all the pages of manual MikroTik Router OS V3.0 User Manual. The MikroTik manuals for Router are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 91

[admin@hq] ip address> priFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 192.168.0.1/24 192.168.0.0 192.168.0.255 ether11 1.1.1.1/32 1.1.1.2 1.1.1.2 farsync1[admin@hq] ip address>
[admin@office] ip address>Flags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.112/24 10.0.0.0 10.0.0.255 ether11 1.1.1.2/32 1.1.1.1 1.1.1.1 farsync1[admin@office] ip address>
MikroTik router to Cisco router using X.21 line
+  	( 
 
...

Page 92

$Page 92 Flags: X - disabled, R - running0 R name=farsync1 mtu=1500 line-protocol=cisco-hdlc media-type=X21clock-rate=64000 clock-source=internal chdlc-keepalive=10sframe-relay-lmi-type=ansi frame-relay-dce=no 1 X name=farsync2 mtu=1500 line-protocol=sync-ppp media-type=V35clock-rate=64000 clock-source=external chdlc-keepalive=10sframe-relay-lmi-type=ansi frame-relay-dce=no[admin@MikroTik] interface farsync>[admin@MikroTik] interface farsync> /ip address add=address=1.1.1.1/24 \\... interface=farsync1 ...$

Flags: X - disabled, R - running0 R name=farsync1 mtu=1500 line-protocol=cisco-hdlc media-type=X21clock-rate=64000 clock-source=internal chdlc-keepalive=10sframe-relay-lmi-type=ansi frame-relay-dce=no
1 X name=farsync2 mtu=1500 line-protocol=sync-ppp media-type=V35clock-rate=64000 clock-source=external chdlc-keepalive=10sframe-relay-lmi-type=ansi frame-relay-dce=no[admin@MikroTik] interface farsync>[admin@MikroTik] interface farsync> /ip address add=address=1.1.1.1/24 \\... interface=farsync1
 

...

Page 93

[admin@office] interface pvc> add dlci=42 interface=farsync1[admin@office] interface pvc> printFlags: X - disabled, R - running# NAME MTU DLCI INTERFACE0 X pvc1 1500 42 farsync1[admin@office] interface pvc>
#
	  
 
 	45 


	 	
 
	 

 
 
 :

[admin@hq] interface pvc> /ip addr add address 2.2.2.1/24 interface pvc1[admin@hq] interface pvc> /ip address printFlags: X - disabled, I - invalid, D - dynamic# ADDRESS NETWORK BROADCAST INTERFACE0 10.0.0.112/24...

Page 94

FrameRelay (PVC, Private Virtual Circuit) Interface
Document revision 1.2 (February 6, 2008, 2:56 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
GeneralInformation
Summary
Specifications
Description
AdditionalDocuments
ConfiguringFrameRelayInterface
Description
PropertyDescription
Notes
FrameRelayConfiguration
ExamplewithCycladesInterface
ExamplewithMOXAInterface
ExamplewithMikroTikRoutertoMikroTikRouter
Troubleshooting
Description
General Information
Summary
#	...

Page 95

•#		#
•

11-	1

1/;;D1	K1	

Configuring Frame Relay Interface
Home menu level:/interface pvc
Description
 
 	 	 	
 
   
  
 

 

	 	
 

 
 $O3 

	
Property Description
dlci(integer; default:16) - Data Link Connection Identifier assigned to the PVC interface
interface(name) - Frame Relay interface
mtu(integer; default:1500) - Maximum Transmission Unit of an interface
name(name; default:pvcN) -...

Page 96

•$O3
[admin@MikroTik] interface pvc> printFlags: X - disabled, R - running# NAME MTU DLCI INTERFACE0 R pvc1 1500 42 cyclades1[admin@MikroTik] interface pvc>
•3 
 

CISCO# show running-config
Building configuration...
Current configuration...
...!ip subnet-zerono ip domain-lookupframe-relay switching!interface Ethernet0description connected to EthernetLANip address 10.0.0.254 255.255.255.0!interface Serial0description connected to Internetno ip addressencapsulation frame-relay IETFserial...

Page 97

[admin@MikroTik] interface moxa-c502> printFlags: X - disabled, R - running0 R name=moxa1 mtu=1500 line-protocol=frame-relay clock-rate=64000clock-source=external frame-relay-lmi-type=ansi frame-relay-dce=nocisco-hdlc-keepalive-interval=10s
1 X name=moxa-c502-2 mtu=1500 line-protocol=sync-ppp clock-rate=64000clock-source=external frame-relay-lmi-type=ansi frame-relay-dce=nocisco-hdlc-keepalive-interval=10s[admin@MikroTik] interface moxa-c502>
•$O3
[admin@MikroTik] interface pvc> printFlags: X - disabled,...

Page 98

*
 
 	    
 	 3/./ 

 	
5 

 
 
 


 

 

	 
	  	(  

  
 

 

	 
 	
 
 53F 
[admin@r1] interface moxa-c101> set 0 frame-relay-dce=yes[admin@r1] interface moxa-c101> printFlags: X - disabled, R - running0 R name=moxa-c101-1 mtu=1500 line-protocol=frame-relay clock-rate=64000clock-source=external frame-relay-lmi-type=ansi...

Page 99

 ,
 

#	 	  

 
 	 (
 	
 *F# 
		

    $	 

 
	

 
 
 3 

Page 88 of 480Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.Other trademarks and registred trademarks mentioned herein are properties of their respective owners.

Page 100

General Interface Settings
Document revision 1.3 (September 10, 2007, 12:57 GMT)
This document applies to MikroTik RouterOS V3.0
Table of Contents
TableofContents
Summary
Description
InterfaceStatus
PropertyDescription
Example
TrafficMonitoring
Description
PropertyDescription
Notes
Example
General Information
Summary
 
 ! 
 	 (	
  9
 *

	 3	 	  	  (
	 

	 &
)

 ) OA+9 
 F	  
 	 
 
 
 
 
  	 	 ...

Start reading MikroTik Router OS V3.0 User Manual
All MikroTik manuals