Miele G 7881 Service Manual
Have a look at the manual Miele G 7881 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4 Service 4.1 Programming Mode Summary Initial requirements AClose the door and shut off the machine. ATurn the program selector switch to the 12 o'clock setting. Accessing APress and hold the topmin°Cand bottom6program function buttons together. ATurn on the machine and release the buttons. Acknowledgement indicator The display shows the current software index, e.g.,P 00. TheIntake/DrainLED lights up. If this is not the case, repeat the process. An exception is the rinse aidHLED. If this lights up, rinse aid or an external disinfectant must be added to the appropriate dispenser. Options APress the middlecprogram function button as necessary to advance to the desired programming level (E 01-E 34). For programming level descriptions, see 070 2.8 Programming Mode - Programming LevelsE 01toE 34. AWhen the desired programming level has been selected, turn the program selector switch to the program or function setting that is to be modified in accordance with the appropriate table. APress the topmin°Cprogram function button as necessary to page through the available options. ATurn the program selector switch to the 12 o'clock setting to save the selected option. AIf appropriate, press thecbutton again as necessary to advance to the desired programming level and make other modifications as required. The previously made modifications remain applicable. If a dash—is shown in the display, the program position is vacant or the appropriate component is not activated, not present or its parameters cannot be modified. Descriptive Technical Documentation 070-56 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
x Note Parameters or functions canonlybe modified via the topmin°Cprogram function button. The programming level isonlydisplayed when the program selector switch is turned to the 12 o'clock setting. If thecbutton is pressed, the electronic advances immediately to the next programming levelwithoutthe appropriate display. Save and quit APress the6button twice. AShut off the machine. x Note Each individual setting modification does not have to be saved separately. After all desired modifications have been made, they can be saved together. 4.2 Service Mode 1 Summary Initial requirements AClose the door and shut off the machine. ATurn the program selector switch to the 12 o'clock setting. Accessing APress and hold themin°Candcbuttons together. ATurn on the machine and release the buttons. Acknowledgement indicator The digital display shows the current statusS10for service mode 1. TheIntake/DrainLED lights up. If this is not the case, repeat the accessing process. An exception is the rinse aidHLED. If this lights up, rinse aid or an external disinfectant must be added to the appropriate dispenser. Descriptive Technical Documentation DTD no. 62-7881 070-57 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Options x ProgramProgram Selector Switch SettingProgram Function ButtonDigital Display Switching step checkSelect a program—First wash temperature —Press6to advance switching stepSwitching step Test program 8 o'clockPress6to start program First wash temperature Table 52:Service Mode 1 Summary Quit (without saving) ATurn the program selector switch to the 12 o'clock setting. AShut off the machine. 4.3 Service Mode 2 Summary Initial requirements AClose the door and shut off the machine. ATurn the program selector switch to the 12 o'clock setting. Accessing APress and hold the6andcbuttons together. x Note If the programming mode is blocked, access to service mode 2 is made more difficult. In this case both program function buttons must be pressed and held together for approximately 2 seconds. ATurn on the machine and release the buttons. Acknowledgement indicator The display shows the current software index, e.g.,P 00. TheIntake/DrainLED lights up. If this is not the case, repeat the accessing process. An exception is the rinse aidHLED. If this lights up, rinse aid or an external disinfectant must be added to the appropriate dispenser. Descriptive Technical Documentation 070-58 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
Options APress thecbutton as necessary to advance to the desired service level (S 21-S 27). For service mode 2 details, see 070 2.9 Service Mode 2 - Service LevelsS 21to S 27. ATurn the program selector switch to the desired function setting. APress themin°Cbutton as necessary to page through the available options. ATurn the program selector switch to the 12 o'clock setting to save the selected option. AIf required, press thecbutton again as necessary to advance to the desired programming level and make other modifications as desired. The previously made modifications remain applicable. If a dash—is shown in the digital display, the program position is vacant or the appropriate component is not activated, not present or its parameters cannot be modified. x Note Parameters or functions canonlybe modified via themin°Cbutton. The programming level isonlydisplayed when the program selector switch is turned to the 12 o'clock setting. Ifcis pressed, the electronic advances immediately to the next programming levelwithoutthe appropriate display. Save and quit APress the6button twice. AShut off the machine. x Note Each individual setting modification does not have to be saved separately. After all desired modifications have been made, they can be saved together. Descriptive Technical Documentation DTD no. 62-7881 070-59 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
4.4 Electronic Module EPGL 081 Removal APull off the switch knob. See 070 Fig. 14, Pos. 4. ARemove the 6 screws securing the fascia panel to the door inner panel (4 across the top and 1 on each side). ARemove the fascia panel with electronic. ARemove the 6 screws securing the mounting bracket to the fascia panel. Remove the mounting bracket from the fascia panel. See 070 Fig. 14, Pos. 2. ARemove the 5 screws securing the electronic to the mounting bracket; see 070 Fig. 14, Pos. 1. Remove the electronic from the mounting bracket. ADisconnect the plug connections (coded) from the electronic. x Fig. 14:EGPL 081 with Retaining Bracket Note When re-installing, ensure that the selector disk of the program selector switch correctly engages with the coupling disk on the electronic. Descriptive Technical Documentation 070-60 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
4.5 Electronic Module EZL 081 Removal AService Panel Removal, 022 4.2. AToekick Removal, 010 4.6. ARemove the 2 top screws securing the electronic. See 070 Fig. 15. Remove the electronic. ASlightly bend the retaining clips outward and remove the circuit board. See 070 Fig. 15, Pos. 1. x Fig. 15:EZL 081 Removal 4.6 Fuse Removal APull off the switch knob. ARemove the 6 screws securing the fascia panel to the door inner panel (4 across the top and 1 on each side). AUnscrew the fuse cap and pull out the fuse. Descriptive Technical Documentation DTD no. 62-7881 070-61 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
072 Fascia Panel, Electronic G 7882 CD, G 7883 CD 2 Function 2.1 Program Summaries 2.1.1 Program Summary (P 06) - G 7882 CD x Program Block G 7882 CD Wash Programs1) SPECIAL 93°C-10 minSPECIAL AN 93°C-10 minvario TD vario TD AN VR 1[—] [—][10 L cold water] — [1 min] [60 s drainage] VR 2[—] [—]—[15.5 L cold water] [1 min] [90 s drainage] HR 1[10.5 L cold water] [16 L cold water]10.5 L cold water 16 L cold water [DOS 1 / 40°C] [DOS 1 / 40°C]DOS 1 / 40°C DOS 1 / 40°C [[93°C / 10 min]] [[93°C / 10 min]]55°C / 5 min 55°C / 5 min [60 s drainage] [90 s drainage] 60 s drainage 90 s drainage HR 2[—] [—]— — CH-DESIN[—] [—] [—] [—] SP 1— — — — SP 2[9 L cold water] [14.5 L cold water]9 L cold water 14.5 L cold water [DOS 3 immediately] [DOS 3 immediately]DOS 3 immediately DOS 3 immediately [1 min] [1 min]1 min 1 min [60 s drainage] [90 s drainage]60 s drainage 90 s drainage SP 35 L cold water —5 L cold water 10.5 L cold water 1 min 1 min 1 min 60 s drainage 60 s drainage 90 s drainage SP 4— — — — NS 1[—] [—]— — NS 2[9.5 L demineralized water][15 L demineralized water]9.5 L demineralized water15 L demineralized water [75°C / 3 min] [75°C / 3 min]93°C / 5 min 83°C / 10 min [60 s drainage] [90 s drainage]60 s drainage 90 s drainage TA 1—99°C / 10 min—99°C / 10 min TA1 / TA2 99°C / 35 min 90°C / 35 min 99°C / 35 min 90°C / 35 min Table 1:Program Summary G 7882 CD (P 06), Part 1 1)The program blocks that appear in bold within the square brackets are fixed and cannot be activated or deactivated, except for the type of water intake. This can be changed in a wash block that cannot be deactivated. Individual values in “[[ ... ]]”can also not be modified. Descriptive Technical Documentation DTD no. 62-7881 072-1 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
x Program BlockG 7882 CD Wash Programs1) CHEM 60°C-5 mincombi CHEM 60°C-5 minA (frei) vario TD NR UNIVERSAL VR 1— — —10 L cold water[10 L cold water] 1 min[1 min] 60 s drainage[60 s drainage] VR 2[10 L cold water] [10 L cold water] — — — [1 min] [1 min] [60 s drainage] [60 s drainage] HR 1[10.5 L cold water] [10.5 L cold water] — —10.5 L cold water [DOS 1 / 40°C] [DOS 1 / 40°C]DOS 1 / 40°C [60°C / 3 min] [55°C / 3 min]60°C / 3 min [60 s drainage] [—]60 s drainage HR 2[—] [—]—10.5 L cold water — DOS 1 / 40°C 55°C / 5 min 60 s drainage CH-DESIN[10.5 L cold water] [[—]] — —[—] [DOS 4 immediately][DOS 4 immediately] [60°C / 5 min] [60°C / 5 min] [60 s drainage] [60 s drainage] SP 1— — — — — SP 2— — — — — SP 3— — —5 L cold water — 1 min 60 s drainage SP 49 L cold water 9 L cold water —9 L cold water 9 L cold water 1 min 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage 60 s drainage NS 1— — — — — NS 29.5 L demineralized water9.5 L demineralized water —9.5 L demineralized water9.5 L demineralized water 60°C / 3 min 60°C / 3 min 93°C / 5 min 65°C / 1 min 60 s drainage 60 s drainage 60 s drainage 60 s drainage TA 1 80°C / 5 min 80°C / 5 min— —80°C / 5 min TA1 / TA2 60°C / 40 min 60°C / 40 min—99°C / 35 min 65°C / 25 min Table 2:Program Summary G 7882 CD (P 06), Part 2 1)The program blocks that appear in bold within the square brackets are fixed and cannot be activated or deactivated, except for the type of water intake. This can be changed in a wash block that cannot be deactivated. Individual values in “[[ ... ]]”can also not be modified. 2.1.2 Program Summary (P 06) - G 7883 CD x Program Block G 7883 CD Wash Programs1) SPECIAL 93°C-10 min vario TD Customer Anorganica VR 1[—][10 L cold water]10 L cold water — [1 min]1 min [60 s drainage]60 s drainage Descriptive Technical Documentation 072-2 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
Program Block G 7883 CD Wash Programs1) SPECIAL 93°C-10 min vario TD Customer Anorganica VR 2[—]— —10 L cold water DOS 3 immediately 50°C /[[1]]min 60 s drainage HR 1[10.5 L cold water]10.5 L cold water — — [DOS 1 / 40°C]DOS 1 / 40°C [[93°C / 10 min]]55°C / 5 min [60 s drainage]60 s drainage HR 2[—]—10.5 L hot water 10.5 L hot water DOS 1 / 40°C DOS 1 / 40°C 80°C / 3 min 75°C / 3 min 60 s drainage 60 s drainage CH-DESIN[—] [—]— — SP 1— — — — SP 2[9 L hot water]9 L hot water 9 L hot water 9 L hot water [DOS 3 immediately]DOS 3 immediately DOS 3 immediately DOS 3 immediately [1 min]1 min 1 min 1 min [60 s drainage]60 s drainage 60 s drainage 60 s drainage SP 35 L hot water 5 L hot water 5 L hot water 5 L demineralized water 1 min 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage 60 s drainage SP 4— —9 L demineralized water 9 L demineralized water 1 min 1 min 60 s drainage 60 s drainage NS 1[—]— — — NS 2[9.5 L demineralized water]9.5 L demineralized water9.5 L demineralized water9.5 L demineralized water [75°C / 3 min]93°C / 5 min 75°C / 1 min 70°C / 1 min [60 s drainage]60 s drainage 60 s drainage 60 s drainage TA 1— —99°C / 25 min 99°C / 25 min TA1 / TA2 99°C / 35 min 99°C / 35 min 70°C / 5 min 70°C / 5 min Table 3:Program Summary G 7883 CD (P 06), Part 1 1)The program blocks that appear in bold within the square brackets are fixed and cannot be activated or deactivated, except for the type of water intake. This can be changed in a wash block that cannot be deactivated. Individual values in “[[ ... ]]”can also not be modified. x Program BlockG 7883 CD Wash Programs1) Organica Standard Universal Intensive Plastic VR 1— —10 L cold water 10 L cold water 10 L cold water 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage VR 2— — — — — HR 110.5 L hot water — — — — DOS 1 / 40°C 65°C / 3 min 60 s drainage Descriptive Technical Documentation DTD no. 62-7881 072-3 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Program BlockG 7883 CD Wash Programs1) Organica Standard Universal Intensive Plastic HR 210.5 L hot water[10.5 L hot water] [10.5 L hot water]10.5 L hot water 10.5 L cold water DOS 1 / 40°C[DOS 1 / 40°C] [DOS 1 / 40°C]DOS 1 / 40°C DOS 1 / 40°C 85°C / 3 min[75°C / 3 min] [80°C / 3 min]85°C / 3 min 55°C / 5 min 60 s drainage[60 s drainage] [60 s drainage]60 s drainage 60 s drainage CH-DESIN—[—] [—] [—] [—] SP 1— — — — — SP 29 L hot water 9 L hot water 9 L hot water 9 L hot water 9 L cold water DOS 3 immediately DOS 3 immediately DOS 3 immediately DOS 3 immediately DOS 3 immediately 1 min 1 min 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage 60 s drainage 60 s drainage SP 35 L hot water —5 L hot water —5 L cold water 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage SP 49 L demineralized water9 L demineralized water9 L demineralized water9 L demineralized water9 L cold water 1 min 1 min 1 min 1 min 1 min 60 s drainage 60 s drainage 60 s drainage 60 s drainage 60 s drainage NS 1— — —9.5 L demineralized water9.5 L demineralized water 0°C / 1 min 55°C / 1 min 60 s drainage 60 s drainage NS 29.5 L demineralized water[9.5 L demineralized water]9.5 L demineralized water9.5 L demineralized water — 80°C / 1 min[75°C / 1 min]75°C / 1 min 80°C / 1 min 60 s drainage[60 s drainage]60 s drainage 60 s drainage TA 1 99°C / 25 min 99°C / 25 min 99°C / 25 min 99°C / 25 min 65°C / 5 min TA1 / TA2 70°C / 5 min 70°C / 5 min 70°C / 5 min 70°C / 5 min 55°C / 35 min Table 4:Program Summary G 7883 CD (P 06), Part 2 1)The program blocks that appear in bold within the square brackets are fixed and cannot be activated or deactivated, except for the type of water intake. This can be changed in a wash block that cannot be deactivated. Individual values in “[[ ... ]]”can also not be modified. Descriptive Technical Documentation 072-4 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am