Miele G 7881 Service Manual
Have a look at the manual Miele G 7881 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Fig. 7:Software Index P 04 - P 05, Version 02 Fig. 8:Software Index P 04 - P 06, Version 03 Descriptive Technical Documentation 070-16 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
2.7.3 Program Sequence Plans - G 7883, G 7883 CD (EGPL 081) x Fig. 9:Software Index P 00 - P 01, Version 02 Descriptive Technical Documentation DTD no. 62-7881 070-17 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Fig. 10:Software Index P 02, Version 03 Fig. 11:Software Index P 03, Version 04 Descriptive Technical Documentation 070-18 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
Fig. 12:Software Index P 04 - P 05, Version 01 Fig. 13:Software Index P 05 - P 06, Version 02 Descriptive Technical Documentation DTD no. 62-7881 070-19 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
2.8 Programming Mode - Programming Levels E 01 to E 34 2.8.1 E 01, Program-Independent Functions –Water hardness settings –Wash blocks with/without heating –Wash blocks with reduced water quantity –Delay start selection –Various water intakes For programming mode access, see Programming Mode Summary, 070 4.1. x Program Level E 01 Program Selector Switch SettingDisplay Function 1 o'clock e.g., 19 1)Setting water hardness in °d (degree of German hardness), depending on max. water quantity of a program. 2 o'clock20Actual temperature as standard display 21Elapsed time as standard display 22Display of active wash block as standard display 3 o'clock302nd wash block VR2 (pre-wash 2) without heating 312nd wash block VR2 (pre-wash 2) with heating to 40°C 322nd wash block VR2 (pre-wash 2) with heating to 50°C 332nd wash block VR2 (pre-wash 2) with heating to 60°C 4 o'clock406th wash block SP1 (interim rinse 1) without heating 416th wash block SP1 (interim rinse 1) with heating to 40°C 426th wash block SP1 (interim rinse 1) with heating to 50°C 436th wash block SP1 (interim rinse 1) with heating to 60°C Descriptive Technical Documentation 070-20 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
Program Level E 01 Program Selector Switch SettingDisplay Function 5 o'clock507th wash block SP2 (interim rinse 2) without heating 517th wash block SP2 (interim rinse 2) with heating to 40°C 527th wash block SP2 (interim rinse 2) with heating to 50°C 537th wash block SP2 (interim rinse 2) with heating to 60°C 6 o'clock608th wash block SP3 (interim rinse 3) without heating 618th wash block SP3 (interim rinse 3) with heating to 40°C 628th wash block SP3 (interim rinse 3) with heating to 50°C 638th wash block SP3 (interim rinse 3) with heating to 60°C 7 o'clock709th wash block SP4 (interim rinse 4) without heating 719th wash block SP4 (interim rinse 4) with heating to 40°C 729th wash block SP4 (interim rinse 4) with heating to 50°C 739th wash block SP4 (interim rinse 4) with heating to 60°C 8 o'clock80VR1 and VR2 (pre-wash 1 and 2) with programmed water quantity 81VR1 (pre-wash 1) with 5.5 L (anesthetics 11 L) / VR2 (pre-wash 2) with programmed water quantity 82VR1 (pre-wash 1) with programmed water quantity / VR2 (pre-wash 2) with 5.5 L (anesthetics 11 L) 83VR1 and VR2 (pre-wash 1 and 2) with 5.5 L (anesthetics 11 L) water Descriptive Technical Documentation DTD no. 62-7881 070-21 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
Program Level E 01 Program Selector Switch SettingDisplay Function 9 o'clock90SP1 and SP3 (interim rinse 1 and 3) with programmed water quantity 91SP1 (interim rinse 1) with 5 L (anesthetics 10.5 L) / SP3 (interim rinse 3) with programmed water quantity 92SP1 (interim rinse 1) with programmed water quantity / SP3 (interim rinse 3) with 5 L (anesthetics 10.5 L) 93SP1 and SP3 (interim rinse 1 and 3) with 5 L (anesthetics 10.5 L) water 10 o'clock100No delay start possible with cleaning temperatures up to 199°F (93°C) 101Delay start possible with cleaning temperatures up to 199°F (93°C) 102 2)No delay start possible and max. cleaning temperature 194°F (90°C) 103 2)Delay start possible and max. cleaning temperature 194°F (90°C) 11 o'clock110Set demineralized water intakes 111Always cold water instead of demineralized water 112 3)Always hot water instead of demineralized water 113 4)All water intakes with demineralized water (available as option with G 7881) Table 10:Program LevelE 01 1)If the display flashes, then the set water hardness level is not permitted for the wash block currently in operation. Standard setting is19on machines supplied with water softener. 2)Holding times in heating steps increased from 15 minutes to 25 minutes in programs with legally set cleaning parameters. 3)Not programmable with the G 7881 and G 7882, as these do not have a hot-water option.4)If this option is programmed, the cold-water line still has to be connected to either cold or DI water intake for the steam condenser. 2.8.2 E 02, Dispenser Settings –Priming (ventilation) of dispenser systems –Dispenser time –Dispensed concentration Descriptive Technical Documentation 070-22 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
–Flow rate monitoring –Delay start selection If no external dispenser system is connected to DOS 1 (no concentration set for DOS 1), then, with the selector switch set to the 1 o'clock position, the detergent dispenser flap can be opened by pressing themin°Cbutton. With an external DOS module and a set concentration, priming is carried out automatically for 90 seconds. An interruption of the 90 seconds is possible but not permitted. For programming mode access, see Programming Mode Summary, 070 4.1. x Program Level E 02 Progra- m Selector Switch SettingDisp- layFunction 1 o'clock d 01Priming (90 s) of DOS 1 dispenser system with countdown display. Or activation of DOS 1 so long as top button is pressed (dispenser concentration is then not set). 1) 2 o'clocke.g., 0.50 or 10DOS 1 dispenser concentration from 0.1 - 0.8% in 0.05% steps, or dispenser time in seconds (10 s)2) 3 o'clock d 02Activation of DOS 2 (rinse aid) so long as top button is pressed 4 o'clock 60Set dispenser time (60 s) for rinse aid. Modification not possible. 5 o'clock d 03Priming (210 s) of DOS 3 dispenser system with countdown display 3) 6 o'clocke.g., 0.10DOS 3 dispenser concentration from 0.05 - 0.5% in 0.05% steps, or dispenser time in seconds2) 7 o'clock d 04Priming (90 s) of DOS 4 dispenser system with countdown display3) 8 o'clocke.g., 1.00DOS 4 dispenser concentration from 0.5 - 1.2% in 0.05% steps, or dispenser time in seconds2) 9 o'clock90Flow rate monitoring of DOS 1 not active 91Flow rate monitoring of DOS 1 active 10 o'clock100Flow rate monitoring of DOS 2 and DOS 3 not active 101Flow rate monitoring of DOS 2 active and DOS 3 not active 102Flow rate monitoring of DOS 2 not active and DOS 3 active 103Flow rate monitoring of DOS 2 and DOS 3 active 11 o'clock 4) 110Flow rate monitoring of DOS 4 not active 111Flow rate monitoring of DOS 4 active Table 11:Program LevelE 02 1)Only with dispenser pump installed. If no external dispenser system is installed, the detergent dispenser flap solenoid in the door is activated for 90 seconds and the flap opens. 2)Only for programs with dispenser pump installed.3)Only with dispenser pump installed and set concentration.4)Only selectable when DOS 4 can be used (G 7882). Descriptive Technical Documentation DTD no. 62-7881 070-23 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.
2.8.3 E 03, Dispensing –Individual wash blocks with/without dispensing For programming mode access, see Programming Mode Summary, 070 4.1. x Program Level E 03 Program Selector Switch SettingDisplay Function 1 o'clock10Without dispensing in wash block 2 (VR2) (pre-wash 2) 11With DOS 1 dispensing in wash block 2 (VR2) (pre-wash 2) direct 12With DOS 1 dispensing in wash block 2 (VR2) (pre-wash 2) from 40°C 13With DOS 3 dispensing in wash block 2 (VR2) (pre-wash 2) direct 14With DOS 3 dispensing in wash block 2 (VR2) (pre-wash 2) from 40°C 15With DOS 4 dispensing in wash block 2 (VR2) (pre-wash 2) direct 16With DOS 4 dispensing in wash block 2 (VR2) (pre-wash 2) from 40°C 2 o'clock20Without dispensing in wash block 3 (HR1) (main wash 1) 21With DOS 1 dispensing in wash block 3 (HR1) (main wash 1) direct 22With DOS 1 dispensing in wash block 3 (HR1) (main wash 1) from 40°C 23With DOS 3 dispensing in wash block 3 (HR1) (main wash 1) direct 24With DOS 3 dispensing in wash block 3 (HR1) (main wash 1) from 40°C 25With DOS 4 dispensing in wash block 3 (HR1) (main wash 1) direct 26With DOS 4 dispensing in wash block 3 (HR1) (main wash 1) from 40°C Descriptive Technical Documentation 070-24 DTD no. 62-7881 This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am
Program Level E 03 Program Selector Switch SettingDisplay Function 3 o'clock30Without dispensing in wash block 4 (HR2) (main wash 2) 31With DOS 1 dispensing in wash block 4 (HR2) (main wash 2) direct 32With DOS 1 dispensing in wash block 4 (HR2) (main wash 2) from 40°C 33With DOS 2 dispensing in wash block 4 (HR2) (main wash 2) direct 34With DOS 2 dispensing in wash block 4 (HR2) (main wash 2) from 40°C 35With DOS 3 dispensing in wash block 4 (HR2) (main wash 2) direct 36With DOS 3 dispensing in wash block 4 (HR2) (main wash 2) from 40°C 37With DOS 4 dispensing in wash block 4 (HR2) (main wash 2) direct 38With DOS 4 dispensing in wash block 4 (HR2) (main wash 2) from 40°C 4 o'clock40Without dispensing in wash block 5 (CHEM-DESIN) (chemical disinfection) 41With DOS 4 dispensing in wash block 5 (CHEM-DESIN) (chemical disinfection) 42With DOS 4 dispensing in wash block 5 (CHEM-DESIN) (chemical disinfection) with 40°C 5 o'clock50Without dispensing in wash block 7 (SP2) (interim rinse 2) 51With DOS 1 dispensing in wash block 7 (SP2) (interim rinse 2) direct 52With DOS 1 dispensing in wash block 7 (SP2) (interim rinse 2) from 40°C 53With DOS 2 dispensing in wash block 7 (SP2) (interim rinse 2) direct 54With DOS 2 dispensing in wash block 7 (SP2) (interim rinse 2) from 40°C 55With DOS 3 dispensing in wash block 7 (SP2) (interim rinse 2) direct 56With DOS 3 dispensing in wash block 7 (SP2) (interim rinse 2) from 40°C 57With DOS 4 dispensing in wash block 7 (SP2) (interim rinse 2) direct 58With DOS 4 dispensing in wash block 7 (SP2) (interim rinse 2) from 40°C Descriptive Technical Documentation DTD no. 62-7881 070-25 18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved.