Miele G 7881 Service Manual

Fig. 7:Software Index P 04 - P 05, Version 02
Fig. 8:Software Index P 04 - P 06, Version 03
Descriptive Technical Documentation
070-16 DTD no. 62-7881
This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am 

2.7.3 Program Sequence Plans - G 7883, G 7883 CD (EGPL 081)
x
Fig. 9:Software Index P 00 - P 01, Version 02
Descriptive Technical Documentation
DTD no. 62-7881 070-17
18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved. 

Fig. 10:Software Index P 02, Version 03
Fig. 11:Software Index P 03, Version 04
Descriptive Technical Documentation
070-18 DTD no. 62-7881
This information should not be duplicated or passed on without Miele approval. All rights reserved. 18.09.2013, US_am 

Fig. 12:Software Index P 04 - P 05, Version 01
Fig. 13:Software Index P 05 - P 06, Version 02
Descriptive Technical Documentation
DTD no. 62-7881 070-19
18.09.2013, US_am This information should not be duplicated or passed on without Miele approval. All rights reserved. 

2.8 Programming Mode - Programming Levels E 01 to E 34
2.8.1 E 01, Program-Independent Functions
–Water hardness settings
–Wash blocks with/without heating
–Wash blocks with reduced water quantity
–Delay start selection
–Various water intakes
For programming mode access, see Programming Mode Summary, 070 4.1.
x
Program Level E 01
Program Selector
Switch SettingDisplay Function
1 o'clock e.g., 19
1)Setting water hardness in °d (degree
of German hardness), depending on
max. water quantity of a...

Program Level E 01
Program Selector
Switch SettingDisplay Function
5 o'clock507th wash block SP2 (interim rinse 2)
without heating
517th wash block SP2 (interim rinse 2)
with heating to 40°C
527th wash block SP2 (interim rinse 2)
with heating to 50°C
537th wash block SP2 (interim rinse 2)
with heating to 60°C
6 o'clock608th wash block SP3 (interim rinse 3)
without heating
618th wash block SP3 (interim rinse 3)
with heating to 40°C
628th wash block SP3 (interim rinse 3)
with heating to 50°C
638th...

Program Level E 01
Program Selector
Switch SettingDisplay Function
9 o'clock90SP1 and SP3 (interim rinse 1 and 3)
with programmed water quantity
91SP1 (interim rinse 1) with 5 L
(anesthetics 10.5 L) / SP3 (interim
rinse 3) with programmed water
quantity
92SP1 (interim rinse 1) with
programmed water quantity / SP3
(interim rinse 3) with 5 L (anesthetics
10.5 L)
93SP1 and SP3 (interim rinse 1 and 3)
with 5 L (anesthetics 10.5 L) water
10 o'clock100No delay start possible with cleaning
temperatures...

–Flow rate monitoring
–Delay start selection
If no external dispenser system is connected to DOS 1 (no concentration set for
DOS 1), then, with the selector switch set to the 1 o'clock position, the detergent
dispenser flap can be opened by pressing themin°Cbutton. With an external
DOS module and a set concentration, priming is carried out automatically for 90
seconds. An interruption of the 90 seconds is possible but not permitted.
For programming mode access, see Programming Mode Summary, 070 4.1....

2.8.3 E 03, Dispensing
–Individual wash blocks with/without dispensing
For programming mode access, see Programming Mode Summary, 070 4.1.
x
Program Level E 03
Program
Selector
Switch
SettingDisplay Function
1 o'clock10Without dispensing in wash block 2 (VR2) (pre-wash 2)
11With DOS 1 dispensing in wash block 2 (VR2) (pre-wash
2) direct
12With DOS 1 dispensing in wash block 2 (VR2) (pre-wash
2) from 40°C
13With DOS 3 dispensing in wash block 2 (VR2) (pre-wash
2) direct
14With DOS 3 dispensing in wash...

Program Level E 03
Program
Selector
Switch
SettingDisplay Function
3 o'clock30Without dispensing in wash block 4 (HR2) (main wash 2)
31With DOS 1 dispensing in wash block 4 (HR2) (main
wash 2) direct
32With DOS 1 dispensing in wash block 4 (HR2) (main
wash 2) from 40°C
33With DOS 2 dispensing in wash block 4 (HR2) (main
wash 2) direct
34With DOS 2 dispensing in wash block 4 (HR2) (main
wash 2) from 40°C
35With DOS 3 dispensing in wash block 4 (HR2) (main
wash 2) direct
36With DOS 3 dispensing in wash...