Macrotel Mt-16h Installation Manual

, 
EXECUTIVE PRIORITY INTRUSION TONE - 
INTERVAL TIMER (PROGRAM 56) 
Destipdbii: ..-, 
_: _: 
This ‘timer defines the interval for iritrusion tone .when the executive prio,tity feature 
is engaged. 
Programming: 
1. Press [#I. 
“Programming is displayed. 
2. Dial 56. 
‘Override alarm” is displayed. 
3. Enter intrusion tone interval. 
00 set to 
99 set 
4. 
Press [#I to save and exit. 
conditions: 
l Intrusion tone is heard by both parties in conversation. 
l Default is 10 seconds. 
0 Duration tone is 250...

, 
CO TO CO CALL 
Description: 
DURATION TIMER (PROGRAM 57) 
This parameter defines the length of time for an unsupervised conference, a DISA 
call or an external call forward connection. The connection will automatically be 
dropped when this timer expires. See MV3 
note. 
Programming: 
1. Press [#I. 
“Programming” is displayed. 
2. Dial 57. 
‘CO/CO call time” is displayed. 
3. Enter number of seconds. 
Example: I0CXSEC 
4. Press [#I to save and exit. 
Conditions: 
l Default is 150 sec. 
l Allowable...

AUTO TIMER (PROGRAM 58) 
Description: 
. On.outgoingcalls, display sets will automatically change to the start of the call 
timer. The timer will appear in accordance with this timer. 
Programming: 
1. Press [#J. 
2. 
3. 
4. ‘Programming” is displayed. 
Dial 58. 
“Timer Delay Time” is displayed. 
Enter xx (seconds) for the start of the automatictimer function. 
Press [#I to save and exit. 
conditions: 
l Default for the start of timer is 10 seconds. 
l After user has placed an outside call, the user may...

DOOR RELEASE TIMER (PROGRAM SQ)** 
Description: 
This allows-the programmer to select the duration of door lock release timer. 
“Programming” is displayed. 
Dial 59.  Programming: 
1. Press [#]. - 
2. 
3. 
4. 
“Door Release TM” is displayed. 
%X.X SEC:” is displayed. 
Enter XXX seconds (00.1 to 10.0 seconds). 
Press [#I to 
save and exit. 
Conditions: 
Default value is 03.0 seconds. 
Door key may be assigned in Program 80 or (Program 
18).** 
99  

CO. LINE RINGING MODE (PROGRAM 60) 
- 
Description: 
Thisfeatures.cnables the system programmer the flexibility. to designate how C.O. 
linesring to keysets on a system-wide basis. 
Programming: 
1. 
Depress [#I 
‘Programming” is displayed 
2. Dial 60 
3. “Incoming Ring Mode” 
is displayed. Press CO. line. 
4. Enter new data 
0 - Individual ring mode 
1 - Conditional ring mode 
2 = Unconditional ring mode 
3 - Distributed ring 
5. Depress [fi 
Programming?+ 
1. 
Depress “V 
‘Programming” is displayed 
2....

NIGHT MODE RINGING (PROGRAM 61) ** 
Description: 
This feature.enabl~ the system 
programmer the flexibility to define which phone(s) ring on 
a per-line basis when thesystem is inthe night mode. 
Programming: 
1. Press [#I. 
“Programming” is displayed. 
2. Dial 61. 
“Night Ring Assign” is displayed. 
3. Press the CO line key to be programmed Current data is displayed. 
4. Press the DSS key of each phone that is to ring. 
5. Press [#] to save and exit. 
Conditions: 
Default value has all CO lines ring...

DAY MODE RINGING (PROGRAM 62) 
Description: 
This-feature enables the system programmer. the flexibility to define which phone(s) 
ring on a per-line ~basiswhenthe system is in the day.mode; 
“Programming” is displayed. 
Dial 62. 
Programmifig: 
1. Press [#I. 
2. 
3. 
4. 
5. 
“Day Ring Assign” is displayed. 
Press the CO line key to be programmed Current data is displayed. 
Press the DSS key of each phone that is to ring. 
Press [#j to save and exit. 
conditions: 
l Default value has all CO lines ring to...

DOORPHONE RING ASSIGNMENT (PROGRAM 63) 
Description: 
. . 
This feature enables the system programmer the flexibility to define which 
telephones are called.by the doorphone. 
Programming: 
1. Press [#J. 
‘Progr amming” is displayed. 
2. Dial 63. 
“Door ring assign” is displayed. 
3. Press the DSS key of each phone that is to ring. 
4. Press [#I to save and exit. 
Conditions: 
l Default value is 1,2,3,4,5,6,7,8. 
l A doorphone may ring a maximum of 8 stations. 
l Stations 10-16 are displayed as A to G...

RING OVER PAGE (PROGRAM 64) **** 
Description: 
This-program enables&e incoming trunk calls and door call to ring 
over an 
externally 
providedspeakezwhen inthenightservice~mode.~The assigned CO lines 
will send a ring tone to the external page voice pair and ring the stations assigned in 
MMC 
#61. 
Programming: 
1. Press [#I. 
‘Programming” is displayed. 
2. Dial [64]. 
“Ring Over Page” is displayed momentarily, then the current data for all eight 
CO lines is displayed. 
3. Enter the new data for the...

DISA SECURITY CODE (PROGRAM 65) *** 
Description: 
l This item allows the system programmer or user to modify the DISA security code. 
Programming: 
1. Press [#I. 
“Programming” is displayed. 
2. Dial 65. 
“DISA Secu Code” is displayed. 
“XxXx” Current Code is displayed. 
3. Enter new password. 
4. Press [#] to save and exit. 
Conditions: 
l Default password is 1234. 
l Password must be four (4) digits. 
l * and # are not allowed. 
l Assign DISA l&es in program 78. 
l This program is available to users,...