Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
225 Networking - ATM 
2
11.Set the 
synchronizationSet the Synchronization Capable field to n (default). 
NOTE:
Up  to 44 b oards may b e d esignated  
sync hronization c ap ab le on R8r and  3 b oard s on 
R8si, R8c si, R8c.  If you enter y in this field when the 
maximum numb er of b oard s has been d esignated , 
the system returns:
Maximum number of Synchronization 
Capable boards already...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
226 Networking - ATM 
2
17.Set VCI Set the Virtual Channel Identifier (VCI) field (32-
1023). This number must be unique among signaling 
groups that share the same ATM circuit pack.
NOTE:
For a d irec t c onnec tion (two fib er-connec ted  CES 
circuit p acks), sp ecify the same VCI at b oth end s of 
the emulated  c irc uit. When the CES is connected  to 
an ATM switch, the VCI spec ified  here must...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
227 Networking - ATM 
2
27.Verify channel 
settingsGo to screen 2; Screen 8 displays.
Depending on the settings in step 18:
nIf Circuit Type field is set at T1, then channel 24 is 
populated. 
nIf Circuit Type field is set at E1, then channel 16 is 
populated.
Other details about D-channels:
nAll ports for one signaling group must be on the same 
ATM circuit pack (the same circuit pack that the D...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
228 Networking - ATM 
2
ATM-CES administration screens
NOTE:
The screens shown in this section are as they look on a Release 8r platform 
through a SAT. Your interface and screen page numbers may differ.
Screen 2. Optional features—screen 1 
30.Set final fields Set the following fields (tabbing goes horizontally):
nGroup Type: field to isdn.
NOTE:
A trunk g roup c an c ontain either ISDN or ATM...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
229 Networking - ATM 
2
Screen 3. Optional features—screen 2 
Screen 4. Optional features—screen 3 
change system-parameters customer-options                       Page   2 of   6 
                                OPTIONAL FEATURES                              
    Abbreviated Dialing Enhanced List? y                       CAS Branch? y
        Access Security Gateway (ASG)? y...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
230 Networking - ATM 
2
Screen 5. Duplication related system parameters
Screen 6. ATM trunk board
Screen 7. Signaling group
change system-parameters duplication                     Page   1 of   1   SPE B
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of SPE Duplication? y
Enable Operation of PNC Duplication? y
ATM TRUNK-BOARD
Location: 2E08
Name: _______________ Synchronization Capable: 1
add...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
231 Networking - ATM 
2
Table 10. Country and protocol version supported (for Screen 7)
Value Country Protocol supported
1-a United States, Canada AT&T TR41449/41459 (tested with AT&T, 
Canadian, and MCI networks)
1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607
2 Australia AUSTEL TSO14.1; Telecom Australia TPH 
1856
3 Japan NTT INIS-NET
4 Italy ETS 300 102
5 Netherlands ETS 300 102
6...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
232 Networking - ATM 
2
Screen 8. Signaling group D-channel assignments—screen 2
Screen 9. Trunk group—screen 1
add signaling-group next                                        Page   2 of   6 
SIGNALING GROUP
Chan Port Chan Port
__1: ___ _17: ___ 
__2: ___ _18: ___ 
__3: ___ _19: ___ 
__4: ___ _20: ___ 
__5: ___ _21: ___ 
__6: ___ _22: ___ 
__7: ___ _23: ___ 
__8: ___ _24: 0cc (T1 only)
__9: ___
_10:...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
233 Networking - ATM 
2
Screen 10. Trunk group—screen 4
Changing the port-to-channel mapping
Use the following steps to change the port-to-channel mapping for emulated 
circuits:
1. Type busyout atm signaling-group
 siggrpnbr and press En te r to busyout 
the signaling group.
2. Type change trunk-group 
trkgrpnbr and press En t e r.
Remove any p ort ad ministration on sc reen 6.
3. Type change...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
234 Networking - ATM 
2
DEFINITY commands for CES
Administration commands that are useful in working with CES are listed in Ta b l e  
11.
Additional DEFINITY ECS administration
After administering the ATM-PNC or ATM-CES, you may need to do some further 
administration, specifically:
nLocations
nSVC cache (PNC only)
nGain/Loss adjustments (PNC only)
Locations 
The DEFINITY ATM-PNC makes it easier for...