Home > Lucent Technologies > Communications System > Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Here you can view all the pages of manual Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 191

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
185 Networking - ISDN Public 
2
nNew fields to support ISDN Presentation RestrictionSystem-parameters Feature Form
change system-parameters features                                       Page 6 of 9
FEATURE-RELATED SYSTEM PARAMETERS
ISDN PARAMETERS
           Send Non-ISDN Trunk Group Name as Connected Name?n
           Display Connected Name/Number for ISDN DCS Calls?n
                 Send ISDN...

Page 192

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
186 IP Solutions 
2
IP Solutions
DEFINITY ECS IP Solutions provide TCP/IP connectivity for two types of trunks and 
three types of IP Softphones. On DEFINITY ECS, 
IP Solutions use the TN802B IP 
Interface assembly, which includes a Windows NT server that resides on the 
TN802B circuit pack inside the DEFINITY ECS. The TN802B IP Interface, 
introduced in Release 8, operates in either the IP Trunk mode...

Page 193

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
187 IP Solutions 
2
vendors’ H.323 v2-compliant switches, or as direct-inward-dial (DID) type of 
“public” trunk providing access to the switch for unregistered users. A variety of 
signaling options can be chosen by the system administrator.
IP Trunk
The IP Trunk mode will typically be chosen for interoperability with existing TN802 
(as opposed to the TN802B) IP Interface circuit packs. IP Trunk can...

Page 194

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
188 IP Solutions 
2
Circuit Pack
The C-LAN and IP Interface assembly circuit packs must be administered on the 
Circuit Pack screen. Open the Circuit Pack screen with the change command (ch 
ci) and enter the board codes in available port slots:
nC-LAN
nCode = TN799
nSfx = B
nName = C-LAN
IP Interface assembly — enter in a slot with at least two empty slot before it
nCode = TN802
nSfx = B
nName = MAPD...

Page 195

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
189 IP Solutions 
2
noutgoing calls are blocked on this signaling group; if so administered, 
blocked calls are diverted to alternate routes (either IP or circuits) as 
determined by the administered routing patterns
You can use the default values set for these parameters, or you can change them 
to fit the needs of your network. The Maintenance-Related System Parameters 
screen can be administered by...

Page 196

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
190 IP Solutions 
2
H.323 Trunk Administration — Task Summary
After the enabling administration is complete, you can administer the H.323 IP 
trunks. The screens and fields that need to be administered are listed below. 
NOTE:
This is only a list of screens and the fields that need to be administered. The 
values that need to be entered in these fields are described in 
DEFINITY 
ECS Administration...

Page 197

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
191 IP Solutions 
2
nName
nNetwork uses 1’s for broadcast address?
Signaling Group
Each H.323 trunk must be assigned to a signaling group. Enter values in these 
fields:
page 1
nGroup Type
nTrunk Group for Channel Selection 
nNear-end Node Name
nNear-end Listen Port 
nFar-end Node Name (Optional)
nFar-end Listen Por t (Optional
nLRQ Required?
nCalls Share IP Signaling Connection?
nBypass If IP...

Page 198

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
192 IP Solutions 
2
page 4—trunk group members assignment
nPo r t
nCode
nName 
nNight
nSig Grp
Network Regions
The Region field on the IP Interfaces screen allows you to set up segregated 
groups of C-LAN and IP Interface (Medpro) resources. This feature can be used in 
a variety of ways. For example, you could use regions to allocate specific C-LAN 
and IP Interface boards to H.323 trunks and others...

Page 199

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
193 IP Solutions 
2
software ap p lic ations running  on a PC that is c onnec ted to DEFINITY ECS 
over an IP network. The sing le network c onnec tion b etween the PC and 
the DEFINITY ECS c arries two c hannels, one for the sig naling  p ath and  
one for the voic e p ath. DEFINITY IP Softp hone hand les the c all sig naling 
and  an H.323 V2-c omplilant aud io app lic ation, suc h as Mic rosoft...

Page 200

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
194 IP Solutions 
2
Figure 13. Road-Warrior Configuration (Voice over IP)
nTelecommuter Configuration (Dual Connection
The telec ommuter c onfig uration of DEFINITY IP Softp hone enab les 
telec ommuters to use the full DEFINITY ECS feature set from home. In this 
c onfig uration, you use two c onnec tions to the DEFINITY server. Over the 
first c onnec tion (via d ial-up  networking  or a network...
Start reading Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Related Manuals for Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

All Lucent Technologies manuals