Home > Lucent Technologies > Communications System > Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Here you can view all the pages of manual Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 161

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
155 Networking - ISDN Public 
2
Networking - ISDN Public
BellCore Calling Name ID
Bellcore Format with V.23 FSK
nThe 24-Por t Analog Line with CID feature supports the option to send 
Bellcore specification messages using V.23 modem protocol.
nBellcore Format with V.23 FSK differs from the standard Bellcore format 
only in the frequencies used for the FSK signaling in the Physical Layer.
nEncompasses...

Page 162

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
156 Networking - ISDN Public 
2
US NI Calling Name for Outgoing Calls?
Bellcore National ISDN Calling Name
 Supplementary Service for PRI
nProvides the user with the capability on incoming calls, to receive Network 
provided Calling Name information, along with name presentation 
indication.
nProvides the user with the capability on outgoing calls, based on trunk 
group administration, for DEFINITY to...

Page 163

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
157 Networking - ISDN Public 
2
Capacity Constraints and Feature Limitations
nDEFINITY will be capable of receiving up to 50 characters of Bellcore 
National ISDN Calling Name information but display a maximum of 15 
characters. 
— Truncation behaviors will truncate names longer than 15 characters 
to the first 15 characters to be displayed. 
NOTE:
DEFINITY does not support optional capabilities to...

Page 164

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
158 Networking - ISDN Public 
2
nThe 5ESS network database query timer is set to one to six seconds (three 
seconds is the default). 
— The aim of DEFINITY support of the Bellcore Calling Name is to 
present as similar a user interface as the LEC Caller-ID service. 
Caller-ID usually delivers the Caller ID information on the 2nd ring 
cycle with each ring-silence cycle defined as 6 seconds.
nGiven the...

Page 165

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
159 Networking - ISDN Public 
2
SS Option A Choices
nThe “Send Name:” field on page 2 of ISDN Trunk Group form allows the 
“r”(estricted) choice when the “Supplementary Service Protocol” is set to 
“A” (National SS protocol). Standard error and help messages apply.
NOTE:
For the Bellcore National ISDN Calling Name feature for PRI, DEFINITY 
supports the callingName, NAME, NamePresentationAllowed,...

Page 166

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
160 Networking - ISDN Public 
2
nWith the addition of Bellcore National ISDN Calling Name feature, 
interworking of Calling Name in the Bellcore National ISDN network will 
also be fully supported if the Bellcore Calling Name information is available 
in the SETUP message. 
— There is no interworking of the Bellcore Calling Name with other PRI 
networks if the Bellcore Calling Name is not in the SETUP...

Page 167

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
161 Networking - ISDN Public 
2
nWhen a LDN call is received, the incoming SETUP message 
is checked for a Calling Party Subaddress IE containing a 
DID extension. 
nIf the extension is present, the call will not be sent to the 
attendant, as is currently the case. The call will, instead, be 
routed to the indicated extension.
nFeature Plus Pseudo DID will only work over trunk groups assigned...

Page 168

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
162 Networking - ISDN Public 
2
Example
nLeased line from DEFINITY® system A to DEFINITY® system B. 
nThe first routing preference can be assigned to the leased line so User B1 
can be dialed directly without sending Pseudo DID subaddress information. 
nIf preference 1 is not available, preference 2 can be assigned to the LDN 
on DEFINITY® system B, and the dialed Pseudo DID extension can be 
sent as...

Page 169

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
163 Networking - ISDN Public 
2
Alerting Ring Pattern
nIf the incoming trunk group, which terminates to the LDN, is administered 
as tie, the ring pattern administered on the trunk for incoming calls apply. 
— If Internal Alert? is yes, the system ring pattern administered for 
internal calls apply. 
— If Internal Alert? is no, the system ring pattern for external calls 
apply. 
— If the trunk group...

Page 170

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
164 Networking - ISDN Public 
2
nPublic networks may check the accuracy of the Calling Line Identification 
number information sent by a CPE. 
nThe number is checked to make sure it is within a provisioned range. 
nIf the number is not accurate based on the trunk group used, the 
DEFINITY®-provided Calling Number would be deleted and a network-
provided “main billing” number would be used instead....
Start reading Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Related Manuals for Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

All Lucent Technologies manuals