Home > Lucent Technologies > Communications System > Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Here you can view all the pages of manual Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 221

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
215 Networking - ATM 
2
Administering the ATM Switch
To administer the ATM switch, refer to your switch’s quick reference guide. 
Administering DEFINITY ECS
The DEFINITY ECS switch software provides 2 kinds of ATM service: 
nATM Por t Network Connectivity (ATM-PNC)
nATM Circuit Emulation Service (ATM-CES)
Table 2. ATM address formats 
FormatLength 
(hex characters) Description (high to low order)
Data...

Page 222

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
216 Networking - ATM 
2
Ta b l e  3 outlines important concepts to observe when administering ATM.
ATM Port Network Connectivity (ATM-PNC) 
Each DEFINITY port network must be translated in the PPN’s screen with the full 
ATM address (The ATM switch prefix, plus the port network’s ESI, plus a Selector 
of 0) that uniquely identifies it.
Use the procedure in Ta b l e  4
 to administer ATM-PNC:
Table 3....

Page 223

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
217 Networking - ATM 
2
Table 4. ATM-PNC administration
ÖStep Action Command Description
1.
Log on 
DEFINITY ECS 
switchUse the init login to log on to the DEFINITY 
switch.
NOTE:
An init
 log in is required  to c hange c ustomer 
options and will b e c halleng ed b y Ac c ess 
Sec urity Gateway (ASG). Contac t your 
regional CSA (c ustomer software 
administrator) to p erform this func tion.
2.
Turn...

Page 224

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
218 Networking - ATM 
2
11.Set the MAC 
address
(Steps 10-13)Set Address format  to one of the following:
E.164 ATM private, DCC, or ICD
NOTE:
If other ATM ap p lic ations are installed ask the 
ATM system administrator to d etermine whic h 
add ress format to use. The system d efault is 
DCC.
12.
Fill in 
information 
from worksheetSet HO DSP: xxxxxxxx, fill in information from 
the ATM worksheet...

Page 225

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
219 Networking - ATM 
2
ATM Circuit Emulation Service (ATM-CES) 
ATM Circuit Emulation Service (ATM-CES):
nCan be administered
— as an ATM-CES direct connect
— through an ATM network using PVCs
Both p roc ed ures are in Ta b l e  9
, und er  “ATM-CES administration 
p roc ed ure” on page 223.
nUses ATM emulated circuits instead of physical T1/E1 tie-trunks out to the 
ATM network.
nUses up to 8...

Page 226

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
220 Networking - ATM 
2
Table 5. Maximum number of ATM interface TN2305/TN2306 circuit packs
ATM-CES rules 
Ta b l e  6 lists several guidelines for ATM-CES administration. PlatformMaximum ATM circuit 
packs allowed Description
r 88 2 x 44 port networks (CES) 
si, csi, c 6 CES only
Table 6. ATM-CES administration rules
Rule How to administer or confirm
Both ends of the emulated circuit must have the...

Page 227

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
221 Networking - ATM 
2
The D channel must be in a port between 009 
and 032.Type display signaling-group siggrpnbr and 
press 
En t e r; go to screen 2 to verify.
The D channel is automatically populated in 
channel 24 (T1) or in channel 16 (E1).
The TN2305/TN2306 circuit packs provide up to 
248 ports for trunking.A circuit pack has 256 ports, but ports 1 
through 8 are reserved for future use. Of...

Page 228

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
222 Networking - ATM 
2
Trunk groups 
At least one trunk group is typically created for each remote switch with these 
attributes (see Screen 9
):
nGroup Type 
field is isdn
nCarrier medium 
field is atm
nDial Access? field is always n
nTN2305/TN2306 may have Trunk Access Codes (TAC), but these are for 
repor ting purposes only and cannot be dialed.
nCDR records for ATM trunk calls are maintained....

Page 229

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
223 Networking - ATM 
2
makes the ATM board appear as if it does. This concept is depicted in Figure 3-1. 
Multiple TN2305/TN2306 circuit packs in a port network could connect to different 
AT M  s w i t c h e s .
Figure 15. DEFINITY signaling groups and members for ATM trunking
nEach of the 248 ports in the ATM trunk group are either B-channels or  D-
channels.
nEach B-channel has an associated...

Page 230

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
Networking Enhancements 
224 Networking - ATM 
2
nATM-CES direct-connect configurations (two CES circuit packs linked by 
fiber, with no intervening switches). Observe the note in step 16.
NOTE:
The screens shown are for a Release 8r platform. The screen numbers may 
differ for Release 8c, Release 8csi, and Release 8si platforms.
Table 9. ATM-CES administration
ÖStep Action Description
1.Set the software 
versionType change...
Start reading Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

Related Manuals for Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

All Lucent Technologies manuals