Lucent Technologies Whats New In DEFINITY Enterprise Communications Server Release 8.2 Manual

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
85 New Mobility-Related Features 
1
Call Progress Tones to Remote Party
nWhen a party dials to an X-Mobile station, the DEFINITY® system provides 
ring-back, busy, or re-order tone as appropriate. 
nIf the remote party is put on hold by the X-Mobile station, hold tone or 
music on hold is provided as administered for the system.
Call Waiting 
nWhen a call arrives for an X-Mobile station, and...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
86 New Mobility-Related Features 
1
Display-based Message Waiting Indication
nAll text information sent to an X-Mobile station contains information 
indicating a message is waiting for it, if the station is marked as having a 
message waiting. 
nNoted by an MW at the end of the display line. 
nContent of the string is administerable.
NOTE:
The display IE is used to indicate message waiting...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
87 New Mobility-Related Features 
1
Process
Idle X-Mobile WT’s switch-hook icon flashes when message is waiting
nWhen a message is left for an X-Mobile Station either through a messaging 
adjunct (for example, INTUITY™ AUDIX®) or one of the DEFINITY® 
system-based features (for example, Leave Word Calling), the X-Mobile 
WT’s message status indication is updated immediately. 
nIf the X-Mobile...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
88 New Mobility-Related Features 
1
nIt will not flash the switch-hook icon after the station goes onhook.
nMWI operation follows ASN.1 specification in ETS 300 745-1.
nMWI Activation/Deactivation messages are conveyed through FACILITY 
messages.
nThe DEFINITY® system sends the MWI Activation/Deactivation messages 
in a connectionless mode through the ISDN FACILITY messages. 
— This type of...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
89 New Mobility-Related Features 
1
nThe display is the same as a standard analog station with one exception. 
nWhen the station is onhook, the port field is blank. 
nWhen the station is offhook the port field contains the identity of the 
connected ISDN trunk port.
DEFINITY® refreshes MWI hourly
nThe DEFINITY® system runs an hourly MWI refresh (also known as audit) 
on a time available basis....

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
90 New Mobility-Related Features 
1
Scenarios
nAll feature operations are intended to work exactly as if the X-Mobile 
station were directly connected to the DEFINITY® system. 
nAnalog-type feature operation was chosen, since most wireless terminals 
support only flash operations and are not multiappearance or context 
sensitive. 
nIn almost all cases, the operation expected for an X-Mobile...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
91 Telephony Applications - International 
1
Telephony Applications - International
Reset Shift Call
When a station call is made to a busy station, reset shift dial tone, called second 
dial tone by the Japanese PBX manufacturers, is heard. During reset shift dial 
tone, a single digit may be entered, which replaces the last digit of the originally 
dialed extension, and the call is offered to...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
92 Telephony Applications - International 
1
This feature applies to all hardware platforms.
NOTE:
Since Japan does not have regulations on the characteristics for reset 
shift dial tone, users require training to properly identify the tone that 
DEFINITY
® ECS uses for this feature. If the PBX is being used by 
people with limited dexterity, the timer associated with this feature is 
set to a...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
93 Telephony Applications - International 
1
Administration
Initial Administration
To administer the reset shift call feature on a DEFINITY® system where it was not 
previously used, the following procedure should be utilized:
1. In order to fully use the reset shift call feature, station extensions should be 
assigned with contiguous numbers for groups of users. Thus, users with 
similar job...

What’s New in DEFINITY ECS
Release 8.2 Job Aid  555-233-754  Issue 1
April 2000
New Switch and Adjunct Support 
94 Telephony Applications - International 
1
NOTE:
Japan does not have national regulations covering the cadence, 
frequency, or level of the reset shift dial tone. However, the de-facto 
standard is to mimic Japanese PBX operations.
Reset shift dial tone frequency
The reset shift dial tone has a frequency of 400 Hz ± ±± ±20 Hz. This requirement 
is based on the Fujitsu switch documentation for...