Home > Lucent Technologies > Communications System > Lucent Technologies Definity Release 8.2 Atm Installation Manual

Lucent Technologies Definity Release 8.2 Atm Installation Manual

Here you can view all the pages of manual Lucent Technologies Definity Release 8.2 Atm Installation Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 111

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-13 Administering DEFINITY ECS 
5
11. Set the 
sync hronizationSe t t h e Synchronization Capable field  to n (default). 
NOTE:
Up  to 44 b oards may b e d esignated  
sync hronization c ap ab le on R8r and  3 b oard s on 
R8si, R8c si, R8c.  If you enter y in this field when the 
maximum numb er of b oard s has been d esignated , 
the system returns:
Maximum number...

Page 112

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-14 Administering DEFINITY ECS 
5
17. Set VCI Set the Virtual Channel Identifier (VCI) field  
(32-1023). This numb er must b e uniq ue among  sig naling  
g roup s that share the same ATM c irc uit pac k.
NOTE:
For a d irec t c onnec tion (two fib er-connec ted  CES 
circuit p acks), sp ecify the same VCI at b oth end s of 
the emulated  c irc uit. When the CES is...

Page 113

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-15 Administering DEFINITY ECS 
5
27. Verify channel 
setting sGo to screen 2; Screen 5-7 displays.
Dep end ing  on the settings in step 18:
nIf Circuit Type field is set at T1, then c hannel 24 is 
populated. 
nIf Circuit Type field  is set at E1, then c hannel 16 is 
populated.
Other d etails ab out D-c hannels:
nAll ports for one signaling group must be on the...

Page 114

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-16 Administering DEFINITY ECS 
5
30. Set final field s Set the following  field s (tabb ing  g oes horizontally):
nGroup Type: field to isdn.
NOTE:
A trunk g roup c an c ontain either ISDN or ATM 
trunks, b ut not b oth.
nThe CDR Reports field  d efaults to y.
nThe Carrier Medium: field  to AT M.
nThe TAC: field  to match customer’s d ial p lan.
nThe Dial Access?...

Page 115

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-17 Administering DEFINITY ECS 
5
ATM-CES administration screens
NOTE:
The sc reens shown in this sec tion are as they look on a Release 8r p latform 
throug h a SAT. Your interfac e and  sc reen p ag e numb ers may d iffer.
Screen 5-1. Optional features—screen 1 
Screen 5-2. Optional features—screen 2 
change system-parameters customer-options...

Page 116

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-18 Administering DEFINITY ECS 
5
Screen 5-3. Optional features—screen 3 
Screen 5-4. Duplication related system parameters
Screen 5-5. ATM trunk board
change system-parameters customer-options                       Page   3 of   6 
                                OPTIONAL FEATURES                              
                     Hospitality (Basic)? y...

Page 117

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-19 Administering DEFINITY ECS 
5
Screen 5-6. Signaling group
Table 5-9. Country and protocol version supported (for Screen 5-6)
Value Country Protocol supported
1-a United States, Canad a AT&T TR41449/41459 (tested  with AT&T, 
Canad ian, and  MCI networks)
1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607
2 Australia AUSTEL TSO14.1; Telec om Australia TPH...

Page 118

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-20 Administering DEFINITY ECS 
5
Screen 5-7. Signaling group D-channel assignments—screen 2
12-b France ETS 300 102 mod ified  ac cord ing  to P10-20, 
called  Euronumeris
Argentina ETS 300 102
Brazil ETS 300 102
China ETS 300 102
Germany ETS 300 102
Hong  Kong ETS 300 102
South Korea ETS 300 102
New Zealand ETS 300 102
Table 5-9. Country and protocol version...

Page 119

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-21 Administering DEFINITY ECS 
5
Screen 5-8. Trunk group—screen 1
Screen 5-9. Trunk group—screen 4
add trunk-group  Page   1 of  10 
                                TRUNK GROUP                                     
Group Number: 1                    Group Type: isdn          CDR Reports: y
  Group Name: OUTSIDE CALL                COR: 1        TN: 1        TAC:...

Page 120

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-22 Administering DEFINITY ECS 
5
Changing the port-to-channel mapping
Use the following  step s to c hang e the p ort-to-c hannel map p ing  for emulated 
circuits:
1. Type busyout atm signaling-group
 siggrpnbr and press En t e r to busyout 
the sig naling  g roup .
2. Type change trunk-group 
trkgrpnbr and press En t e r.
Remove any p ort ad ministration on sc...
Start reading Lucent Technologies Definity Release 8.2 Atm Installation Manual

Related Manuals for Lucent Technologies Definity Release 8.2 Atm Installation Manual

All Lucent Technologies manuals