Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 524
    							 
    461
    Administration for Network Connectivity
    555-233-504— Issue 1 — April 2000 CID: 77730
    G  References
    Installation and 
    maintenanceDEFINITY ECS Release 8.2 — Installation and Test for Single-Carrier Cabinets, 
    555-233-120, Issue 1
    Provides procedures and information for hardware installation and initial testing of 
    single-carrier cabinets. This document is availabe in languages other than English and 
    can be ordered from the BCS Publications Catalog web site.
    DEFINITY ECS Release 8.2 — Installation and Test for Multi-Carrier Cabinets, 
    555-233-114, Issue 1
    Provides procedures and information for hardware installation and initial testing of 
    multi-carrier cabinets.
    DEFINITY ECS Release 8.2 — Installation for Adjuncts and Peripherals, 
    555-233-116, Issue 1
    Provides procedures and information for hardware installation and initial testing of 
    ECS adjunct and peripheral systems and equipment.
    DEFINITY ECS Release 8.2 — Installation and Test for Compact Modular 
    Cabinets, 555-233-118, Issue 1
    Provides procedures and information for hardware installation and initial testing of 
    compact modular cabinets.
    DEFINITY ECS Release 8.2 — ATM Installation, Upgrades, and Administration, 
    555-233-124, Issue 1
    Provides step-by-step instructions for how to install, upgrade, and administer ATM 
    switches.
    DEFINITY ECS Release 8.2 — Installation and Maintenance for Survivable 
    Remote EPN, 555-233-121, Issue 1
    Describes how to install, cable, test, and perform maintenance on a Survivable 
    Remote Expansion Port Network (SREPN). Provides power, ground, and fiber 
    connections.
    DEFINITY ECS Release 8.2 — Upgrades and Additions for R8.2r, 555-233-115, 
    Issue 1
    Provides procedures for an installation technician to upgrade an existing DEFINITY 
    Communications System or DEFINITY ECS to DEFINITY ECS Release 8.2.
    Includes upgrade considerations, lists of required hardware, and step-by-step upgrade 
    procedures. Also includes procedures to add control carriers, switch node carriers, 
    port carriers, circuit packs, auxiliary cabinets, and other equipment.
    DEFINITY ECS Release 8.2 — Upgrades and Additions for R8.2si, 555-233-122, 
    Issue 1
    Provides procedures for an installation technician to upgrade an existing DEFINITY 
    Communications System or DEFINITY ECS to DEFINITY ECS Release 8.2. 
    Includes upgrade considerations, lists of required hardware, and step-by-step upgrade 
    procedures. Also includes procedures to add control carriers, switch node carriers, 
    port carriers, circuit packs, auxiliary cabinets, and other equipment. 
    						
    							 G  References
    Administration for Network Connectivity
    CID: 77730 555-233-504 — Issue 1 — April 2000
    462
    DEFINITY ECS Release 8.2 — Maintenance for R8.2r, 555-233-117, Issue 1
    Provides detailed descriptions of the procedures for monitoring, testing, 
    troubleshooting, and maintaining the R8.2r ECS. Included are maintenance 
    architecture, craft commands, step-by-step trouble-clearing procedures, the 
    procedures for using all tests, and explanations of the system’s error codes.
    DEFINITY ECS Release 8.2 — Maintenance for R8.2si, 555-233-123, Issue 1
    Provides detailed descriptions of the procedures for monitoring, testing, 
    troubleshooting, and maintaining the R8.2si ECS. Included are maintenance 
    architecture, craft commands, step-by-step trouble-clearing procedures, the 
    procedures for using all tests, and explanations of the system’s error codes.
    DEFINITY ECS Release 8.2 — Maintenance for R8.2csi, 555-233-119, Issue 1
    Provides detailed descriptions of the procedures for monitoring, testing, 
    troubleshooting, and maintaining the R8.2csi (Compact Modular Cabinet) ECS. 
    Included are maintenance architecture, craft commands, step-by-step trouble-clearing 
    procedures, the procedures for using all tests, and explanations of the system’s error 
    codes. 
    Call center documents
    These documents are issued for DEFINITY ECS Call Center applications. The 
    intended audience is DEFINITY ECS administrators.
    DEFINITYDEFINITY ECS Release 8 — Guide to ACD Call Centers, 555-233-503, Issue 2
    This module contains information about the call center-specific features of the 
    DEFINITY ECS. 
    DEFINITY ECS Release 8 — Call Vectoring/EAS Guide, 555-230-521, Issue 4
    Provides information on how to write, use, and troubleshoot vectors, which are 
    command sequences that process telephone calls in an Automatic Call Distribution 
    (ACD) environment.
    It is provided in two parts: tutorial and reference. The tutorial provides step-by-step 
    procedures for writing and implementing basic vectors. The reference includes 
    detailed descriptions of the call vectoring features, vector management, vector 
    administration, adjunct routing, troubleshooting, and interactions with management 
    information systems (including the Call Management System).
    DEFINITY ECS Release 7— Basic Call Management System (BCMS) Operations, 
    555-230-706, Issue 2
    Provides detailed instructions on how to generate reports and manage the system. It is 
    intended for telecommunications managers who wish to use Basic Call Management 
    System (BCMS) reports and for system managers responsible for maintaining the 
    system. 
    						
    							 
    463
    Administration for Network Connectivity
    555-233-504— Issue 1 — April 2000 CID: 77730
    G  References
    CentreVu CMSThe following documents provide information about administration and use of the 
    CentreVu Call Management System (CMS).
    Lucent Call Center’s Little Instruction Book for Basic Administration, 
    585-210-935, Issue 1
    Lucent Call Center’s Little Instruction Book for Advanced Administration, 
    585-210-936, Issue 1
    CentreVu Call Management System Release 3 Version 8 — Administration, 
    585-210-910, Issue 1
    CentreVu Call Management System — Database Items, 585-210-939, Issue 1
    CentreVu Call Management System Release 3 Version 8 — External Call History 
    Interface, 585-210-912, Issue 1
    CentreVu Call Management System Release 3 Version 8 — Upgrades and 
    Migrations, 585-210-913, Issue 1
    CentreVu Call Management System Release 3 Version 8 — Software Installation 
    and Setup, 585-210-941, Issue 1
    CentreVu Call Management System Release 3 Version 8 — Maintenance and 
    Troubleshooting, 585-210-919, Issue 1
    CentreVu Advocate Release 8— User Guide, 585-210-927, Issue 1
    CentreVu Supervisor Version 8— Installation and Getting Started, 585-210-928, 
    Issue 1
    CentreVu Supervisor Version 8— Reports, 585-210-929, Issue 1
    CentreVu Report Designer Version 8— User Guide, 585-210-930, Issue 1
    CentreVu Call Management System — Forecast, 585-215-825, Issue 1
    CentreVu Call Management System — Custom Reports, 585-215-822, Issue 2
    Application-specific documents
    These documents support specific DEFINITY applications.
    ACD DEFINITY Communications Systems G3 — Automatic Call Distribution (ACD) 
    Agent Instructions, 555-230-722, Issue 5
    Provides information for use by agents after they have completed ACD training. 
    Includes descriptions of ACD features and the procedures for using them.
    DEFINITY Communications Systems G3 — Automatic Call Distribution (ACD) 
    Supervisor Instructions, 555-230-724, Issue 4
    Provides information for use by supervisors after they have completed ACD training. 
    Includes descriptions of ACD features and the procedures for using them. 
    						
    							 G  References
    Administration for Network Connectivity
    CID: 77730 555-233-504 — Issue 1 — April 2000
    464
    Console operationsThe primary audience for these documents consists of attendant console users.
    DEFINITY ECS Release 7 — Console Operations, 555-230-700, Issue 4
    Provides operating instructions for the attendant console. Included are descriptions of 
    the console control keys and functions, call-handling procedures, basic system 
    troubleshooting information, and routine maintenance procedures.
    DEFINITY ECS Release 7 — Console Operations Quick Reference, 555-230-890, 
    Issue 3
    Provides operating instructions for the attendant console. Included are descriptions of 
    the console control keys and functions, call-handling procedures, basic system 
    troubleshooting information, and routine maintenance procedures. This document is 
    availabe in languages other than English and can be ordered from the BCS 
    Publications Catalog web site.
    Hospitality DEFINITY ECS and Guestworks Release 8.2 — Hospitality Operations, 
    555-233-755, Issue 1
    Provides step-by-step procedures for using the features available for the lodging and 
    health industries to improve their property management and to provide assistance to 
    their employees and clients. Includes detailed descriptions of reports.
    Non-U.S. audiences DEFINITY ECS — Application Notes for Type Approval
    Describes specific hardware and administration required to operate the DEFINITY 
    ECS in countries outside the United States. Available on the DEFINITY ECS Release 
    8.2 Library CD only.  
    						
    							465Administration for Network Connectivity555-233-504 — Issue 1 — April 2000  CID: 77730
    Glossary
    AAAR
    See Automatic Alternate Routing (AAR).
    Abbreviated Dialing (AD)
    A feature that allows c allers to p lac e c alls b y d ialing  just one or two d igits.
    AD
    See Abbreviated Dialing (AD)
    ADU
    See Asynchronous data unit (ADU).
    adjunct
    A p roc essor that d oes one or more tasks for another p roc essor and  that is 
    op tional in the c onfig uration of the other processor. Intuity AUDIX and  CentreVu 
    CMS are c onsid ered ad junc ts to the DEFINITY ECS.
    Administration Without Hardware (AWOH)
    A feature that allows administration of ports without associated terminals or 
    other hardware.
    ANSI
    American National Standards Institute. A United States professional/technical 
    association supporting a variety of standards.
    APLT
    Advanced Private-Line Termination.
    ARP
    Address Resolution Protocol.
    ARS
    See Automatic Route Selection (ARS).
    ASCII
    American Standard Code for Information Interchange. 
    The standard c ode for 
    rep resenting  charac ters in dig ital form. Each charac ter is rep resented  b y an 
    8-bit cod e (inc lud ing  p arity b it). 
    						
    							asynchronous data transmission   Glossary
    Administration for Network Connectivity
    CID: 77730 555-233-504 — Issue 1 — April 2000
    466
    asynchronous data transmission
    A method of transmitting data in which each character is preceded by a start bit 
    and followed by a stop bit, thus permitting data characters to be transmitted at 
    irregular intervals. This type transmission is advantageous when transmission is 
    not regular (characters typed at a keyboard). Also called asynchronous 
    transmission. 
    Asynchronous data unit (ADU)
    A device that allows direct connection between RS-232C equipment and a 
    digital switch.
    Asynchronous Transfer Mode (ATM)
    A connection-oriented, digital service optimized for fiber-optic lines at speeds 
    up to 622.08 mbps. ATM networks set up a virtual circuit (virtual connection) 
    between the transmitter and the receiver before sending any data. Data is then 
    sent in a continuous stream of fixed-length, 58-byte cells, each of which 
    contains a 48-byte payload and a 5-byte header. The header contains the virtual 
    circuit number that identifies the pre-negotiated path through the network.
    AT M
    See Asynchronous Transfer Mode (ATM)
    Audio Information Exchange (AUDIX)
    A fully integrated voice-mail system. Can be used with a variety of 
    communications systems to provide call-history data, such as subscriber 
    identification and reason for redirection.
    Automatic Alternate Routing (AAR)
    A feature that routes calls to other than the first-choice route when facilities are 
    unavailable.
    Automatic Route Selection (ARS)
    A system for automatically routing telephone calls by the least costly route. A 
    feature of the Lucent DEFINITY Enterprise Communications Server.
    auxiliary trunk
    A trunk used to connect auxiliary equipment, such as radio-paging equipment, 
    to a communications system.
    AWO H
    See Administration Without Hardware (AWOH). 
    						
    							B8ZS 
    467
    Administration for Network Connectivity
    555-233-504 — Issue 1 — April 2000 CID: 77730
      Glossary
    BB8ZS
    See Bipolar 8 Zero Substitution (B8ZS).
    Basic Rate Interface (BRI)
    A standard ISDN frame format that specifies the protocol used between two or 
    more communications systems. As used in North America, BRI provides 23 
    64-kbps B-channels (voice or data) and one 64-kbps D-channel (signaling). The 
    D-channel is the 24th channel of the interface and contains multiplexed 
    signaling information for the other 23 channels.
    bandwidth
    The amount of data that a given channel can transmit in a given period of time, 
    measured in bits per second (not bytes per second) on digital networks or in 
    Hertz (cycles per second) on analog networks. 
    For analog  transmission, the 
    b and  wid th can b e measured as the d ifferenc e, exp ressed in hertz, b etween 
    the hig hest and  lowest freq uenc ies transmitted .
    baud 
    A unit of transmission rate equal to the number of signal events per second. See 
    also bit rate.
    BCC
    See bearer capability class (BCC) 
    bearer capability class (BCC)
    Code that identifies the type of a call (for example, voice and different types of 
    data). Determination of BCC is based on the caller’s characteristics for 
    non-ISDN endpoints and on the Bearer Capability and Low-Layer 
    Compatibility Information Elements of an ISDN endpoint. Current BCCs are 0 
    (voice-grade data and voice), 1 (DMI mode 1, 56 kbps data transmission), 2 
    (DMI mode 2, synchronous/asynchronous data transmission up to 19.2 kbps) 3 
    (DMI mode 3, 64 kbps circuit/packet data transmission), 4 (DMI mode 0, 64 
    kbps synchronous data), 5 (temporary signaling connection, and 6 (wideband 
    call, 128–1984 kbps synchronous data).
    BER
    Bit error rate.
    Bipolar 8 Zero Substitution (B8ZS)
    B8ZS line coding substitutes a mix of 1s and 0s for every group of eight 
    consecutive 0s in a stream of AMI-encoded data (see line coding). The encoded 
    string contains consecutive ones with the same polarity. These intentional, 
    bipolar violations of the AMI coding scheme let the receiving end identify, 
    decode, and restore the long zero strings in the original message. B8ZS line 
    coding does not corrupt digital data, so it is commonly used with T- 1 lines. 
    						
    							bit (binary digit)   Glossary
    Administration for Network Connectivity
    CID: 77730 555-233-504 — Issue 1 — April 2000
    468
    bit (binary digit)
    One unit of information in b inary notation, having  two p ossib le values: 0 or 1.
    bit rate
    The sp eed  at which bits are transmitted, usually exp ressed in b its p er sec ond . 
    Also called  
    d ata rate.
    bps
    Bits per second.
    BOS
    Bit-oriented signaling.
    BRI
    See Basic Rate Interface (BRI)
    bridge
    A device that connects two or more packet-switched networks and directs 
    packets sent from one to the other. See router.
    bus bridge
    A connection between the TDM bus and the packet bus built into the C-LAN 
    circuit pack for use with DEFINITY ECS R7csi. Bus bridge connectivity is not 
    used with any other DEFINITY switch model.
    BX.25
    A version of the CCITT X.25 protocol for data communications. BX.25 adds a 
    fourth level to the standard X.25 interface. This uppermost level combines 
    levels 4, 5, and 6 of the ISO reference model.
    byte
    A seq uence of (usually eig ht) b its processed together.
    CCall Detail Recording (CDR)
    A feature that uses software and hardware to record call data. (Same as station 
    message detail recording — SMDR).
    Call Detail Recording utility (CDRU)
    Software that collects, stores, optionally filters, and outputs call-detail records. 
    						
    							Call Management System (CMS) 
    469
    Administration for Network Connectivity
    555-233-504 — Issue 1 — April 2000 CID: 77730
      Glossary
    Call Management System (CMS)
    An application, running on an adjunct processor, that collects information from 
    an ACD unit. CMS enables customers to monitor and manage telemarketing 
    centers by generating reports on the status of agents, splits, trunks, trunk 
    groups, vectors, and VDNs, and enables customers to partially administer the 
    ACD feature for a communications system.
    call redirection
    See restricted facilities.
    CALLed Party Number IE
    The ISDN information element containing the digits sent to the called party.
    capture rate
    The number of frames contained in a one-second video sample, used as a 
    measure of video quality.
    CA-TSC
    Call-Associated Temporary Signaling Connection.
    CCIS
    Common-Channel Interoffice Signaling
    CCITT
    Comitte Consultatif International Telephonique et Telegraphique. Now called 
    International Telecommunications Union (ITU).
    CCMS
    Control-Channel Message Set.
    CDR
    See Call Detail Recording (CDR). (Same as SMDR and CMDR).
    CDRU
    Call Detail Record Unit.
    CDRP
    Call Detail Record Poller.
    CEPT1
    European Conference of Postal and Telecommunications Rate 1. 
    						
    							channel   Glossary
    Administration for Network Connectivity
    CID: 77730 555-233-504 — Issue 1 — April 2000
    470
    channel
    A communication path linking two points for transmitting voice and data. Also:
    1. A circuit-switched call.
    2. In wideband, all of the time slots (contiguous or noncontiguous) necessary to 
    support a call.  Example: an H0-channel uses six 64-kbps time slots.
    3. A DS0 on a T1 or E1 facility not specifically associated with a logical 
    circuit-switched call; analogous to a single trunk.
    circuit
    1. An arrangement of electrical elements throug h whic h elec tric  c urrent flows.
    2. A c hannel or transmission p ath b etween two or more points.
    circuit pack
    A c ard  on which electric al circ uits are p rinted, and  IC chips and  elec tric al 
    c omp onents are installed . A c irc uit pac k is installed  in a switc h c arrier.
    Class of Restriction (COR)
    A feature that allows up to 64 classes of call-origination and call-termination 
    restrictions for voice terminals, voice-terminal groups, data modules, and trunk 
    groups.
    Class of Service (COS)
    A feature that uses a number to specify if voice-terminal users can activate the 
    Automatic Callback, Call Forwarding All Calls, Data Privacy, or Priority 
    Calling features.
    circuit-switched network
    A network that sets up and maintains a connection for the exclusive use of two 
    or more communicating parties for the duration of their call.   The familiar, 
    voice telephone network is circuit-switched. See packet switching.
    clear-channel facility
    A digital circuit that requires no in-channel framing or control bits. The whole 
    bandwidth is thus available for data transmission.
    client 
    An application that runs on one processor while drawing on data or other 
    resources that are on a server located elsewhere. MMCX client: a workstation 
    capable of making MMCX calls. Such a workstation is a client of one or more 
    MMCX servers. See dial-plan table.
    CMDR
    Centralized Message Detail Recording. (Same as CDR and SMDR).
    CMS
    Call Management System. 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Administration For Network Connectivity Instructions Manual