Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-29 Add IP Interface Assembly 
4
NOTE:
The c ustomer provid es the IP add ress, sub net mask, and  g ateway 
address.
At this time the TN802B LCD read s PC BOOT *
, and  ab out 3 to 4 minutes 
later read s MEDPRO *
 with the asterisk flashing
.
Test the External Connection to the LAN
To test the external IP c onnec tions, p ing the IP Interfac e...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-30 Add IP Interface Assembly 
4
2. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and p ress En t e r. 
Th e  v a r i a b l e  
nnn.nnn.nnn.nnn is the IP ad d ress of the c ustomer’s 
g ateway and  
UUCSS is the c ab inet, c arrier, and  slot of the TN802B IP 
Interfac e.
3. Type ping ip-address 
nnn.nnn.nnn.nnn board UUCSS and p ress En t e r. 
Th...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-31 Add IP Interface Assembly 
4
nA valid  telep hone numb er reserved  for the IP Interfac e d iag nostic  mod em
If non-U.S. c ustomer:
nMod em c omp arab le to a U.S. Rob otic s, Inc . Sp ortster Mod el USR 33.6 
EXT.
nA c ab le from the mod em to the TN802B external c ab le assemb ly.
We rec ommend  that you p rotec t the c ab inet where the IP...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-32 Add IP Interface Assembly 
4
Figure 4-7. TN802B IP Interface External Cable Assembly
3. Read  and  follow any d irec tions inserted  into the p ac kag e b y the fac tory.
Connect the Cables
1. Determine into whic h p ort slot you are p utting  the TN802B IP Interfac e.
NOTE:
Make sure that at least 3 ad joining  slots are free.
2. From the rear of...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-33 Add IP Interface Assembly 
4
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s modem sup p lied  to 
U.S. c ustomers only. If using  a d ifferent mod em, follow the manufac turer’s 
instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the 
TN802B...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-34 Add IP Interface Assembly 
4
Connect the Monitor, Keyboard, and Mouse
NOTE:
Only make these c onnec tions if ad ministered  loc ally. Not nec essary if 
ad ministered  remotely.
You must c onnec t these b efore inserting  the TN802B IP Interfac e.
1. Attac h a VGA monitor to the VGA c onnec tor of the TN802B IP Interfac e 
external c ab le assemb...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-35 Add IP Interface Assembly 
4
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
NOTE:
You need  a CAT5 or better c ab le for 100-Mb yte operation.
Install the Circuit Pack
!CAUTION:
When ad d ing  or rep lac ing  any hard ware, b e sure to ground  yourself 
ag ainst elec...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-36 Add IP Interface Assembly 
4
Figure 4-9. TN802B IP Interface faceplate
NOTE:
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the fac ep late 
until the latc h reac hes the b ottom rail of the c arrier. Then c lose the latc h 
until it is fully eng ag ed .
1. Insert the TN802B IP Interfac e into the rig htmost of the three...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-37 Add IP Interface Assembly 
4
Figure 4-10. J58890MA-1 L30 IP Interface Assembly
Test the Modem
1. Check for dial tone.
2. Contac t Luc ent Tec hnolog ies Customer Sup p ort and  ask a rep resentative 
to d ial into your IP Interfac e server. 
Administer the IP Interface
Ad minstration is d one either loc ally or remotely. If ad ministered  loc...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-38 Add IP Interface Assembly 
4
3. Chec k the Cod e c olumn to see if the slots ab ove the TN802B say 
DSMAPD or MEDPRO.
.
4. If MEDPRO, g o to the entry just ab ove the TN802B that says MEDPRO.
5. Type DSMAPD, and press 
En te r. Chang ing the one entry automatic ally 
c hang es the entry ab ove it. If it is in IP Trunk mode, you g et the following...