Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-49 Add IP Interface Assembly 
4
NOTE:
In the Finish d ialog  b ox, selec t I will restart later
. Do not 
select Restart computer
.
This would  b e a g ood  time to read  the Read me.txt file.
5. Click on Start > Settings > Control Panel > Services
.
6. Select IP Trunk 
and click on Startup
.
NOTE:
Do not c lic k on Start.
7. Under Startup Type,...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-50 Add IP Interface Assembly 
4
11. Affix the new TN802B lab el to the c irc uit p ac k.
12. Disc onnec t the monitor, keyb oard , and  mouse.
Circuit Pack Verification
1. Type change circuit-pack
 and  p ress En te r.
2. Chec k the Cod e c olumn to see if it says DSMAPD or Med Pro.
.
3. To c orrec t it, g o to the entry just above the TN802B that...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-51 Add TTC Japanese 2-Mbit Trunks 
4
Add TTC Japanese 2-Mbit Trunks
The TN2242 Jap an 2-Mb it trunk interc onnec ts DEFINITY to other vend or 
eq uip ment in Jap an as well as to other DEFINITY switc hes through the Time 
Division Multip lexor (TDM).
Installing the trunk
1. Determine the p ort assig nment of the trunk from the Trunk Group  form.
2....

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-52 Installing an Integrated Channel Service Unit (ICSU) Module 
4
The b asic  ICSU req uires a TN474E or TN777D or later suffix. The 
enhanc ed  integ rated  c hannel servic e unit req uires a TN474F or TN777E or 
later suffix.
Installing the 120A CSU
See Figure 4-11. 
Figure 4-11. 120A Channel Service Unit Module
!CAUTION:
Do not p lug  the 120A...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-53 Installing an Integrated Channel Service Unit (ICSU) Module 
4
Be sure the DS1 c irc uit p ac k is set for 24-c hannel op eration (1.544 Mbp s). 
The 120A d oes not op erate with the 32-c hannel interfac e. A switc h on the 
c irc uit p ac k or ad ministration sets this op tion. 
!CAUTION:
Always wear an antistatic  wrist strap  when installing  a...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-54 Installing an Integrated Channel Service Unit (ICSU) Module 
4
7. If a TN474F is used , make sure the c irc uit p ac k is set for 24-c hannel 
op eration. Set the switc h on the c irc uit p ac k as shown in Fig ure 2-1.
8. From the DS1 c irc uit-p ac k form of the system ad ministration c onsole, set 
the line c omp ensation field  to 0-133 ft...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-55 Add NAA1 Fiber Optic Circuit Pack 
4
Add NAA1 Fiber Optic Circuit Pack
Unpack and Inspect
1. Verify the eq uipment rec eived . See Figure 4-12. Ac tual eq uip ment may 
vary in ap p earanc e and  may ship  in sep arate p ac kag es.
2. See Table 4-10
 for a list of p art c omc od es.
Figure 4-12. NAA1 Fiber Optic Interface Kit Equipment Figure...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-56 Add NAA1 Fiber Optic Circuit Pack 
4
Installation Instructions
1. Remove the c over. 
2. Insert the ATM c irc uit p ac k, p referab ly in the top  row.
3. Insert the c onnec tor into the top  op ening  at the rear of the NAA1 c irc uit 
pack. See Figure 4-13
.
4. Attac h either the sing le mod e (yellow) c able or multi-mod e (g ray) c ab le to...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-57 Add NAA1 Fiber Optic Circuit Pack 
4
10. Route the c ab le(s) to the ATM c irc uit p ac k(s) and  c onnec t them.
NOTE:
The loop  formed  b y the c ab le c onnec ting  the two c irc uit pac ks must 
have a minimum rad ius of 1”  (2.54 c m). If not, ad just the c ab le or 
move the ATM c irc uit p ac k to another loc ation. 
11. Connec t the other...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-58 Add NAA1 Fiber Optic Circuit Pack 
4
Test the Installation of the ATM Circuit Pack
1. Log  into the manag ement terminal.
2. Ad minister the system b y referring  to ATM Installation, Up g rad es, and  
Ad ministration, 555-233-106.
3. Type list configuration all
 and  p ress 
En t e r to determine if the new ATM 
c irc uit p ac k ap p ears in the...