Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-19 Add IP Interface Assembly 
4
The IP Interfac e is an assemb ly c omp osed  of a TN802B c irc uit b oard, a 
p roc essor c ard , and DSP resourc e c ard . For ord ering  p urp oses, the assemb ly is 
id entified  as a J58890MA-1 L30, b ut for simp lic ity, we refer to it in this b ook as the 
TN802B IP Interfac e.
The TN802B IP Interfac e op erates...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-20 Add IP Interface Assembly 
4
nAn ad d itional unoc c up ied  p ort slot for the TN799B, if need ed . If you have 
an existing TN799 c irc uit p ac k, rep lac e it with the TN799B.
nA 10 BaseT or 10/100 BaseT Ethernet c onnec tion into your loc al area 
network for the TN802B.
nA 10 BaseT Ethernet c onnec tion into your loc al area network for the...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-21 Add IP Interface Assembly 
4
3. Read  and  follow any d irec tions inserted  into the p ac kag e b y the fac tory.
The TN802B external c ab le assemb ly is a bund le of c ab les with an amp henol 
c onnec tor at the end  of the b und le and  various PC-typ e c onnec tors (VGA, 
Universal Serial Bus [ USB] , mouse, keyb oard , Ethernet, mod em, and...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-22 Add IP Interface Assembly 
4
Figure 4-3. TN802B IP Interface External Cable Assembly
Connect the Cables
1. Determine into whic h p ort slots you are p utting the TN799B C-LAN and  
TN802B IP Interfac e c irc uit p ac ks.
NOTE:
Make sure that at least 3 ad jac ent slots are free for the TN802B.
From the rear of the c ab inet:
2. If add ing  a new...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-23 Add IP Interface Assembly 
4
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s modem sup p lied  to 
U.S. c ustomers only. If using  a d ifferent mod em, follow the manufac turer’s 
instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the 
TN802B...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-24 Add IP Interface Assembly 
4
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
NOTE:
You need  a CAT5 or better c ab le for 100-Mb yte operation.
Install the Circuit Packs
!CAUTION:
When ad d ing  or rep lac ing  any hard ware, b e sure to ground  yourself 
ag ainst elec...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-25 Add IP Interface Assembly 
4
If you need  to remove the TN802B IP Interfac e from the c arrier at a later 
time, shut down Wind ows NT first b y p ressing the rec essed reset button on 
the fac ep late (see Figure 4-5
) of the TN802B IP Interfac e until the LCD 
shows a flashing MSHUT *
. When the flashing  stop s and  the asterisk 
d isap p ears...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-26 Add IP Interface Assembly 
4
1. Insert the TN799B c irc uit p ac k into the p ort slot id entified  earlier.
NOTE:
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the 
fac ep late until the latc h reac hes the bottom rail of the c arrier. Then 
c lose the latc h until it is fully eng ag ed .
2. Insert the TN802B IP Interfac e...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-27 Add IP Interface Assembly 
4
Figure 4-6. J58890MA-1 L30
 IP Interface Assembly
Administer the TN799B C-LAN
Refer to the DEFINITY Enterp rise Communic ations Server Ad ministration for 
Network Connec tivity.
Administer the IP Interface
Ad ministration is usually d one remotely; c all your servic e rep resentative to start 
the process....

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Adding or Removing Hardware 
4-28 Add IP Interface Assembly 
4
2. Type change node-names
 and  p ress En te r.
3. On sc reen 2, typ e in the node name and  IP add ress for the TN802B.
4. Type change circuit-pack
 and  p ress 
En te r.
5. Chec k the Cod e c olumn to see if the slots ab ove the TN802B say 
DSMAPD or MEDPRO.
.
6. If not, typ e MEDPRO in the slot just ab ove TN802B...