Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-85 CAMA/E911 Installation 
1
Screen 1-11. Class of Restriction form (page 1)
36. On the Class of Restric tion sc reen (pag e 1), in the Calling Party 
Restriction:
 field , typ e none 
and  p ress 
En te r.
37. Typ e Save Translation
 and press 
En te r.
 Page 1 of 3
CLASS OF RESTRICTION
               COR Number: 10
          COR...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-86 Install the BRI Terminating Resistor 
1
Install the BRI Terminating Resistor
The resistors balanc e the c able p lant b etween the rec eiver and  the transmitter on 
the interfac e. When using  the TN2198 ISDN-BRI 2-Wire U Interfac e c irc uit p ac k, 
an NT1 is req uired. A terminating resistor is always req uired  near the terminal 
when...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-87 Install the BRI Terminating Resistor 
1
Terminating Resistor Adapter
Figure 1-38 shows an 8-p in 440A4 terminating  resistor ad ap ter. The ad ap ter has 
an 8-wid e plug  at 1 end , a short c ord , and  an 8-wid e jac k at the op p osite end .
Figure 1-38. 8-Wide Terminating Resistor Adapter (440A4) Figure Notes
1. 8-wid e p lug 2. 8-wid...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-88 Install the BRI Terminating Resistor 
1
Closet Mounted (110RA1-12)
The 110RA1-12 terminating  resistor bloc k c onsists of twelve 2-p air c irc uits and  
p rovid es the 100 Ohm termination used  for ISDN-BRI c irc uits.
Figure 1-39
 shows the wiring  of the 110RA1-12. Three rows of 110D-4 c onnec tor 
b loc ks c ontain resistors and c ap...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-89 Install the BRI Terminating Resistor 
1
Figure 1-40 shows the wiring  c onnec tions for the 110RA1-12 terminal b loc k. The 
TN556 BRI switc h p ort is terminated  to b ottom row C.
Figure 1-40. Typical Installation of Terminating Resistor Block
For p oint-to-p oint wiring , the top  row c onnec ts to the b lue station field . The p air 
c...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-90 Install Multi-point Adapters 
1
Install Multi-point Adapters
Use multi-point ad ap ters to p rovid e sig nal fanout of the T-interfac e. BR851-B or 
the 367A p erform fanout at the work station. These ad ap ters sup p ort more than 1 
ISDN terminal p er horizontal 4-p air D-insid e wire (DIW). To sup p ort multiple 
horizontal runs, a MDF...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-91 Install Multi-point Adapters 
1
367A Adapter
The 367A ad ap ter p rovid es fanout for up  to 7 terminals. See Figure 1-42.
Figure 1-42. Wiring Diagram of 367A Adapter Figure Notes
1. Jac k 1
2. Jac k 23. Jac k 8
4. 367A ad ap ter
312 88 877 766 655 544 433 322 211 1
4 

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-92 Install Multi-point Adapters 
1
Basic Multi-point Installation Distances
Figure 1-43 p rovid es c ab ling  information for fanout of ISDN-BRI multi-point 
installations. In Figure 1-43
, the terminating  resistor is loc ated  in the satellite 
c loset. All d istanc es assume 24 AWG (#5) (0.26 mm2) D-Insid e Wire (DIW).
Figure 1-43. Basic...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-93 Install Off-Premises Station Wiring 
1
Install Off-Premises Station Wiring
The c abling  for off-p remises stations is p rovid ed by the loc al telep hone c omp any. 
These stations c an ap p ear on any of the RJ21X network interfac es p rovid ed  for 
the CO trunks. 
!CAUTION:
Use only an FCC-ap p roved  (or eq uivalent) analog  type...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-94 Install Off-Premises Station Wiring 
1
Figure 1-44. Connections for 1 to 8 Out-of-Building Analog Telephones Figure Notes
1. Loc ally eng ineered c ab les 
2. Out-of-b uild ing  wiring
3. Multi-p air p rotec tor units (p rimary 
p rotec tors with heat c oils or eq uivalent 
with sneak current protection)
4. 356A ad ap ter
5. B25A c ab le...