Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-45 Set Up System Access 
1
Figure 1-24. Typical DSA screen in SAT emulation mode
Figure 1-25. Typical DSA screen in GEDI mode 

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-46 Set Up System Access 
1
Connecting a PC
You c an c onnec t your PC or lap top  to the DEFINITY ECS R8si/R8c si/R8r either 
d irec tly (50 ft [ 15 m]  or less) or remotely throug h a d ata mod ule or a mod em. 
Connecting directly to the DEFINITY ECS
You c an c onnec t d irec tly from the PC if it is 50 ft (15 m) or less from the 
DEFINITY...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-47 Set Up System Access 
1
Connecting remotely to the DEFINITY ECS
To c onnec t remotely to the system, you need  one of the following  p iec es of 
hard ware:
nConnecting through a data module
nConnecting by analog modem to INADS port
Connecting through a data module
If more than 50 ft (15 m) from the DEFINITY ECS, you c an c onnec t the PC...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-48 Set Up System Access 
1
NOTE:
With a 7400A or 7400B+  data mod ule, use a 4-wire d ig ital line c irc uit p ac k. 
With the 8400B+  d ata mod ule, use a 2-wire d igital line c irc uit p ac k.
In p lac e of a 7400B+  d ata mod ule, you c an use a 7400A d ata mod ule. If 
you do, set the 7400A to DCE Mod e.
2. Wire the d ig ital line c irc...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-49 Set Up System Access 
1
Testing Hardware Connections
In the following  tab le, find  your d ata mod ule and  follow the instruc tions for testing  
and  troub leshooting  it.
.
Setting the Data Module Operating Mode
1. Connec t an RS-232 c ab le from the DSA/DNA c omp uter to the d ata 
mod ule. If you are using  an 8400B+ , c onnec t the...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-50 Set Up System Access 
1
Setting the 7400B+ Options
1. Set the DIP switc hes for the 7400B+  using  Table 1-7. The DIP switc hes are 
loc ated  insid e the unit. To ac c ess them
a. Remove the p ower c ord  from the unit.
b . Remove the c over from the top  rear of the unit.
c . Set the d ip  switc hes.
d . Rep lac e the c over.
e. Connect...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-51 Set Up System Access 
1
1. Connec t the eq uip ment as shown in Figure 1-28.
Figure 1-28. A typical remote connection through a modem to access a remote 
DEFINITY ECS
Follow these step s to c onnec t to the DEFINITY ECS through a mod em.
1. Connec t the c omp uter to the mod em.
2. Connec t an analog  telephone line to the left most analog...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-52 Set Up System Access 
1
4. Plug  the mod em into an AC p ower outlet.
5. Turn on the modem.
6. Set the following  p ort setting s:
Table 1-8. U.S. Robotics Modem Dip Switch Settings
Dip 
Switch Setting Description
1UP
DOWNData Terminal Ready normal
Data Terminal Ready override
2UP
DOWNVe r b a l re su lt  c o d e s
Numeric result codes...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-53 Set Ringing Option 
1
Set Ringing Option 
Figure 1-29. Ringing Option Selection
1. Chec k the ring ing  op tion for the c ountry of installation (20 Hz, 25 Hz, or 
50 Hz). See Figure 1-29
.
2. Set the slid e switc h to the p rop er setting. Refer to the lab el on the sid e of 
the power unit. Figure Notes
1. Ring ing  option switc h...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-54 Activate and Administer the System 
1
Activate and Administer the System
NOTE:
The Release 8 CMC is a PPN c ab inet only. Cab inet A is the c ontrol c arrier and  
Cab inets B and  C are port c arriers.
Power Up System
Single Cabinet Installations
1. Insert the translation c ard  into the slot in the TN798B Proc essor c irc uit 
pack.
2....