Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-105 Install Emergency Transfer Unit and Associated Telephones 
1
Install Telephone for Power Transfer Unit
Trunk/Auxiliary Field: Telephone Used Only for Emergency Transfer
1. Connec t a p air of wires b etween the -48V and  GRD terminals on the yellow 
emergenc y transfer row/c onnec ting  bloc k and  the EM TRANS RELAY PWR 
terminal. See...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-106 Connect Modem to Telephone Network 
1
Connect Modem to Telephone 
Network
1. Cross-c onnec t the network jac k on the mod em to the network interfac e 
(via a 103A or mod ular wall jac k). See Table 1-22
 for the p inout.  
Figure 1-49. Network Jack on U.S. Robotics Modem
Table 1-22. Pinout of Network Jack
Pin Number Signal
1 Unused
2Tip...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-107 Connect Modem to Telephone Network 
1
External Modem Option Settings
The U.S. Rob otic s Sp ortster Mod el USR 33.6 EXT external mod em is the 
rec ommend ed external mod em for Release 8 CMC. A loc ally ob tained , 
type-ap p roved  external mod em may b e used . Contac t your Luc ent Tec hnolog ies 
representative for information. 
1....

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-108 Connect Modem to Telephone Network 
1
8. For non-United  States installations, set the remaining  mod em field s as 
shown in Table 1-24
.
9. Press 
En t e r when the mod em field s are p rop erly ad ministered .
Table 1-24. Release 8 CMC Modem Fields 
Field Description
Modem 
ConnectionDefault is none
 for Release 8 CMC. Set to external...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-109 Connect Modem to Telephone Network 
1
Auto-Answer 
Ring NumberThis field  c ontrols the number of ring s required  b efore the mod em 
answers an inc oming  c all. This field  should  b e set to S0= 10.
Dial Type
This field  c ontrols the typ e of interreg ister sig naling  used  b etween the 
mod em and  the CO. This 3-c harac ter field...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-110 Connect Modem to Telephone Network 
1 

Completing Installation and Cable Pinouts 
2-1 Perform System Administration 
2
DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
2
Completing Installation and Cable 
Pinouts
Perform System Administration
NOTE:
Some of the interfac e units used  b etween the system and  other typ es of 
eq uip ment req uire sp ec ific  c onfiguration setting s and  ad ministration for 
eac h ap p lic ation. Refer to the user’s g uide for eac h eq...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Completing Installation and Cable Pinouts 
2-2 Perform System Administration 
2
Enable Alarm Origination to INADS
No External Modem Installed (or No Alarm Origination to INADS)
1. Type change system-parameters maintenance
 and press En t e r. 
2. Type n
 in the Alarm Orig ination Ac tivated  to OSS Numb ers field  and p ress 
En t e r . 
3. For some software releases, enab le...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Completing Installation and Cable Pinouts 
2-3 Set Neon Voltage — Ring Ping 
2
Set Neon Voltage — Ring Ping
NOTE:
If the ring ing  op tion is set to 50 Hz, neon voltag e is not availab le. If 25 Hz is selec ted , 
the maximum voltag e is 120 volts. Refer to ‘‘Set Ringing Option’’ on page 1-53
.
NOTE:
Set the c ontrol to OFF if there are no neon messag e waiting  lamp s or if LED...

DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Completing Installation and Cable Pinouts 
2-4 Installation Completion 
2
Installation Completion
1. Type logoff
 and  p ress En te r  to p revent unauthorized  c hang es to d ata. 
2. Set the left and  rig ht d oors onto the hing e pins and  c lose the d oors. The 
d oors must be c losed  to p revent EMI emissions. Tig hten the d oor sc rews. 
3. Set the rig ht c over p anel onto...