Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
657 Feature-Related System Parameters 
17
DID Busy Treatment
Allow AAR/ARS Access from DID/DIOD
Allow ANI Restriction on AAR/ARS
(For Russia only) If a call is placed over a Russian shuttle trunk or a Russian 
rotary trunk via an AAR or ARS entry with the ANI Req field set to 
r, then ANI is 
requested just like a 
y entry. However, if the ANI request fails, the call 
immediately drops. All other trunk types...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
658 Feature-Related System Parameters 
17
Abort Conference Upon Hang-Up 
Allows DCP, hybrid, wireless, or ISDN-BRI phone users to abort the conference 
operation when they hang up.
Abort Transfer
Stops the transfer operation whenever a user presses a non-idle call appearance 
button in the middle of the transfer operation, or when they hang up. If both the 
Abort Transfer and Transfer Upon Hang-Up fields are...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
659 Feature-Related System Parameters 
17
7405ND Numeric Terminal Display
7434ND
Distinctive Audible Alerting (Internal, External, 
Priority)
This is also known as Distinctive Ringing. 
Attendant Originated Calls
Valid entries Usage
y/n
If enabled, this allows you to use 7405ND in the Type field of 
the station screen. This is not an actual phone type, but you can 
use this to define ports for certain types...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
660 Feature-Related System Parameters 
17
DTMF Tone Feedback Signal to VRU - 
Connection, Disconnection
This field appears only if DTMF Feedback Signals for VRU on the 
Customer-Options System Parameters screen is 
y.
Field descriptions for page 6
Screen 90. Feature-Related System Parameters screen 
Send Non-ISDN Trunk Group Name as 
Connected Name
Valid entries Usage
0
–9, *, #, ABCDEnter the code to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
661 Feature-Related System Parameters 
17
Display Connected Name/Number for ISDN DCS 
Calls
Send ISDN Trunk Group Name on Tandem Calls
CPN Replacement for Restricted Calls
CPN Replacement for Unavailable Calls
QSIG TSC Extension
Path Replacement with Measurements
Valid entries Usage
y/n
 Enter y to display the connected name/number (if received) for 
ISDN DCS calls.
Valid entries Usage
y/n
 Enter y to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
662 Feature-Related System Parameters 
17
MWI - Number of Digits Per AUDIX Subscriber
Appears only if the Basic Supplementary Services field or the ISDN Feature Plus 
field on the System-Parameters Customer-Options screen is 
y. This field appears 
an indication of the number of digits per AUDIX subscriber.
NOTE:
For QSIG-MWI only. These routing digits and inserted digits must screen a 
digit string that,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
663 Feature-Related System Parameters 
17
international, and (2) whether the Numbering Plan Identifier (NPI) is Unknown or 
ISDN/Telephony. This administered prefix is applied to national calls. Prefixing 
applies to any subsequent display on the same switch when the call is transferred, 
covered, or forwarded. The same prefixing applies to outgoing ISDN-PRI calls 
when the connected number information is...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
664 Feature-Related System Parameters 
17
Unknown Numbers Considered Internal for 
AUDIX
Appears when, on the System-Parameters Customer-Options screen, either the 
ISDN-PRI or ISDN-BRI Trunks field is 
y. This field controls the treatment of an 
ISDN number whose numbering plan identification is “unknown” in a QSIG 
centralized AUDIX arrangement. This field works in conjunction with the Calling 
Party...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
665 Feature-Related System Parameters 
17
US NI Calling Name for Outgoing Calls?
Field descriptions for page 7
Screen 91. Feature-Related System Parameters screenValid entries Usage
y/n
 Enter y to send a name on outgoing calls over NI PRI trunks. 
Important: Be sure you have validated that your service 
provider’s central office is capable of accepting calling name 
information from DEFINITY in this way....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
666 Feature-Related System Parameters 
17
Pull Transfer
Update Transferred Ring Pattern
Outpulse Without Tone
Wait Answer Supervision Timer
Refer to Unanswered DID Call Timer (seconds)
 for more information. 
Valid entries Usage
y/n
Enter y to enable the Pull Transfer feature on a system-wide 
basis. This allows either the transferring or transferred-to 
party to press the Transfer button to complete the...