Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
507 CAMA Numbering Format 
17
This screen provides the CESID format by extension number or number blocks. 
This allows for multiple CESID formats to be sent over multiple CAMA trunk 
groups allowing for mixed station numbering plans and some limited conversion 
from non-DID to DID numbers typically required by the Private 
Switch/Automatic Location Interface (PS/ALI) database.
The default CESID defines the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
508 CDR System Parameters 
17
Ext Code
CESID
Total Length
CDR System Parameters
Use the Call Detail Recording (CDR) System Parameters screen to set parameters 
for the types of calls you want to record and how to format the information. You 
can use CDR records to determine call costs, diagnose problems, detect abuse, and 
optimize your network. 
Valid entries Usage
Up to 5 digits Enter the leading digits or...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
509 CDR System Parameters 
17
Field descriptions for page 1
Screen 47. CDR System Parameters screen
Node Number (Local PBX ID)
This field displays the DCS switch node number in a network of switches. 
CDR Date Format
Use this field to select the format for the date stamp that begins each new day of 
call records. 
Valid entries Usage
month/day
  
day/month
Choose the format that is most appropriate for your...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
510 CDR System Parameters 
17
Primary Output Format
Controls the format of the call records sent to the primary output device.
Primary Output Extension
This field determines where the switch sends the CDR records, and is required if 
you specify a Primary Output Format. 
Valid entries Usage
customized
Use this option if you have special call accounting needs that 
standard record formats do not accommodate....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
511 CDR System Parameters 
17
Secondary Output Format
Controls the format of the call records sent to the secondary output device. 
!CAUTION:
Only qualified (Lucent Technologies) service personnel should administer a 
secondary output device. This option may cause loss of data when the buffer 
contains large amounts of data.
Secondary Output Extension
Appears when the secondary output format is...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
512 CDR System Parameters 
17
EIA Device Bit Rate
Applies to G3si only. Displays if either Primary or Secondary Output Format is 
eia.
Use Enhanced Formats
Enhanced formats provide additional information about time in queue and ISDN 
call charges, where available. This affects the expanded, “teleseer”, lsu, 
printer, and unformatted output formats. 
Modify Circuit ID Display
This affects the “printer,”...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
513 CDR System Parameters 
17
Record Outgoing Calls Only
Intra-Switch CDR
Suppress CDR for Ineffective Call Attempts
Ineffective call attempts are calls that are blocked because the user did not have 
sufficient calling privileges or because all outgoing trunks were busy. This 
includes the unavailable incoming or outgoing trunks due to trunk usage 
allocation for ISDN Call-by-Call Service Selection trunks,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
514 CDR System Parameters 
17
Disconnect Information in Place of FRL
See ‘‘
Call detail record field descriptions’’ on page 1254 for more information.
Outg Attd Call Record
Only appears if Outg Trk Call Splitting is 
y.
Interworking Feat-flag
See ‘‘
Call detail record field descriptions’’ on page 1254 for more information.  
Force Entry of Acct Code for Calls Marked on 
Toll Analysis Screen
Specifies whether...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
515 CDR System Parameters 
17
Calls to Hunt Group — Record
Record Called Vector Directory Number Instead 
of Group or Member
If this option is enabled, the called VDN overrides the group or member 
information that normally appears in the Dialed Number Field of the CDR record. 
If a call is directed through more than one VDN, the first VDN used for the call is 
stored. This applies only to calls routed to a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
516 CDR System Parameters 
17
Inc Attd Call Record
Only appears if Inc Trk Call Splitting is 
y.
Record Non-Call-Assoc TSC
A temporary signaling channel (TSC) is a virtual connection established within an 
ISDN D-channel. For more information, see the DS1/CEPT1/ISDN PRI 
Reference.
Call Record Handling Option
Displays on G3r only. Used to control call routing when new calls come in, the 
CDR link is down,...