Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
527 Class of Restriction 
17
Fully Restricted Service
NOTE:
If this field is enabled, the APLT field must be n.
Category For MFC ANI
The Category for MFC ANI field always controls categories for Russian signaling 
trunks. It also may control categories for R2-MFC signaling trunks, depending on 
what value is in the Use COR for Calling Party Category field on the 
system-parameters multi-frequency screen.
The...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
528 Class of Restriction 
17
Add/Remove Agent Skills
MF ANI Prefix
Defines the prefix to apply to an extension number when ANI is sent to the CO. 
This overrides any ANI prefix administered on the Multifrequency Signaling 
screen. This does not apply when ANI is tandemed through the switch on tandem 
calls. This field also applies to the ANI for the switch when the originating side is 
a trunk and there was...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
529 Class of Restriction 
17
Automatic Charge Display
Shows the cost of an active outgoing call using Periodic Pulse Metering (PPM) or 
ISDN Advice of Charge (AOC) on Digital Communications Protocol (DCP) or 
Lucent BRI stations.
Can Be Picked Up By Directed Call Pickup
Can Use Directed Call Pickup
Group Controlled Restriction
Determines if the current COR is under controlled restriction. This field can help...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
530 Class of Restriction 
17
Field descriptions for page 2
Screen 50. Class of Restriction screen 
MF Incoming Call Trace
Brazil Collect Call Blocking
 For Brazil only
Block Transfer Display 
Valid entries Usage
y/n
Enter y to allow assignment of a Call Trace COR to a station. 
DEFINITY ECS then generates an MFC backward signal 
(administered on the System-Parameters 
Multifrequency-Signaling screen) during...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
531 Class of Restriction 
17
Field descriptions for page 3
Screen 51. Class of Restriction screen
CALLING PERMISSION 
Field descriptions for page 4
Screen 52. Class of Restriction Valid entries Usage
y/n
A y means an originating facility assigned this COR can be 
used to call facilities assigned this COR. Enter 
n for each COR 
number (0 through 95) that cannot be called by the COR being 
implemented.
change...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
532 Class of Service 
17
SERVICE OBSERVING PERMISSION
Class of Service
This screen administers access permissions for call processing features that 
require dial code or feature button access.
NOTE:
Class of Service (COS) does not apply to trunk groups except for the 
Remote Access feature.
A COS assignment defines whether or not a telephone user may access or use the 
following features and functions. Up to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
533 Class of Service 
17
The screen lists the default values for each COS/feature combination. For a 
particular combination, 
y allows access to the feature and n denies access. Assign 
entries on the screen for each COS to be implemented. Default values are shown 
on the screen.
!CAUTION:
Because many hunt groups are set up with COS 1, be careful when you 
assign restrictions to COS 1.
Automatic Callback...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
534 Class of Service 
17
nAdd and remove agent skills
nRecord integrated announcements
Off-Hook Alert 
See ‘‘
Emergency Access to the Attendant’’ on page 1323 for more information. 
To enable this option, either the Hospitality (Basic) or Emergency Access to 
Attendant field must be enabled on the System-Parameters Customer-Options 
screen.
Client Room 
Allows users to access Check-In, Check-Out, Room...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
535 Code Calling IDs 
17
Extended Forwarding B/DA 
Allows this user to administer call forwarding (when the dialed extension is busy 
or does not answer) from a remote location. You cannot change this COS to 
y if 
Extended Cvg/Fwd Admin on the System Parameters Customer-Options screen is 
n. See ‘‘Extended User Administration of Redirected Calls’’ on page 1213 for 
more information.
Trk-to-Trk Restriction...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
536 Command Permission Categories 
17
Screen 54. Code Calling IDs 
Ext
This field assigns extensions to chime codes. Only one extension can be assigned 
to each chime code.
Related topics
Refer to ‘‘
Setting up chime paging over loudspeakers’’ on page 378 for 
instructions.
Refer to ‘‘
Loudspeaker paging’’ on page 1416 for a description of the feature.
Command Permission Categories
Use this screen to...