Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
557 Crisis Alert System Parameters 
17
Retries
Displays when the Alert Pager field is 
y.
Retry Interval (sec)
Displays when the Alert Pager field is 
y. This field is not used unless the Retries 
field is 
1-10.
Main Number
The main phone number to the location or a location code. This field is optional 
and does not require an entry. Displays when the Alert Pager field is 
y.
Pager Number
Displays when the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
558 Data modules 
17
Pin Number
This field can be used for any combination of the pager pin number and pauses or 
left blank. Displays when the Alert Pager field is 
y.
DTMF Duration - Tone (msec)
The length of time the Dual-Tone Multi-Frequency (DTMF) tone is heard for each 
digit. Displays when the Alert Pager field is 
y.
Pause (msec)
The length of time between DTMF tones for each digit. Displays when the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
559 Data modules 
17
Field descriptions for page 1
Screen 64. Data Module
Data Extension
Enter the extension assigned to the data module.
Name
Enter the name of the user associated with the data module. The name is optional 
and can be blank.
BCC
(Bearer Capability Class) Used with Data Line, Netcon, Processor Interface, 
Processor/Trunk, and System Port Data Modules. Appears when the ISDN-PRI or 
ISDN-BRI...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
560 Data modules 
17
Refer to ‘‘Generalized route selection’’ on page 1340 for a detailed description of 
Bearer Capability Classes (BCC) and their ability to provide specialized routing 
for various types of voice and data calls. The BCC value is used to determine 
compatibility when non-ISDN-PRI facilities are connected to ISDN facilities 
(ISDN-PRI Interworking).
Ty p e
Enter the type of data module....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
561 Data modules 
17
data-lineAssigns a Data Line Data Module. The Data Line Data Module 
(DLDM) screen assigns ports on the Data Line circuit pack 
(DLC) that allows EIA 232C devices to connect to the system. 
The DLC, with a companion Asynchronous Data Unit (ADU), 
provides a less expensive data interface to the system than 
other asynchronous DCP data modules.
The DLC supports asynchronous transmissions...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
562 Data modules 
17
netconAssigns a Netcon Data Module. Netcon data modules are the 
Processor Data Modules (PDMs) that are integrated into the 
system’s network control ports that provide asynchronous 
circuit switched interfaces to the maintenance and 
administration terminals, Hospitality journal printers, and CDR 
digital output. They are characterized by their special locations, 
that is, special port...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
563 Data modules 
17
pppAssigns a Point-to-Point Protocol data module. The PPP Data 
Module screen assigns a synchronous TCP/IP port on the 
C-Lan. These ports are tailored to provide TCP/IP connections 
for use over telephone lines. Refer to DEFINITY ECS 
Administration for Network Connectivity for more information 
on Point-to-Point data modules.
procr-intfAssigns a Processor Interface Data Module. The...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
564 Data modules 
17
COS
Enter the desired class of service.
Remote Loop-Around Test
Used with Processor/Trunk and X.25 Data Modules. Appears when the Type field 
is 
pdm, tdm, or x.25.
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
x.25Assigns an X.25 Data Module in G3r configurations for 
communications to Adjuncts and other nodes in a DCS 
network. Refer to DEFINITY ECS...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
565 Data modules 
17
Physical Channel
Used with Netcon and Processor Interface Data Modules. The Physical Channel 
number is referred to on associated system forms as the Interface Link number
.
Board
Used with Announcement Data Modules. Enter the five character announcement 
circuit pack number that identifies the physical circuit pack to which the 
announcement module is connected. You can enter 
X in this...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
566 Data modules 
17
Port
Used with 7500, Data Line, Ethernet, Processor/Trunk, PPP, System Port, X.25, 
and World Class BRI Data Modules. Specifies a port location to which the data 
module is connected.
NOTE:
You can enter X in the Port field to indicate that there is no hardware 
associated with the port assignment (also known as administration 
without hardware). These stations are referred to as...