Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
567 Data modules 
17
MM Complex Voice Ext
Used with 7500 and World Class BRI Data Modules. This field contains the 
number of the associated phone in the multimedia complex. This field appears 
only after you set the Multimedia field to 
y. This field is left blank until you enter 
the data module extension in MM Complex Data Ext on the Station screen.
Secondary data module
Used with Processor/Trunk Data...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
568 Data modules 
17
ITC
(Information Transfer Capability) Used with 7500, Announcement, Netcon, 
Processor/Trunk, and Processor Interface Data Modules. Appears only when the 
Comm Type field is 
56k-data or 64k-data. Indicates type of transmission 
facilities to be used for ISDN calls originated from this endpoint. Does not display 
for voice-only or BRI stations.
TN
Establish Connection
Used with X.25,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
569 Data modules 
17
Enable Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface data modules. 
Refer to DEFINITY ECS Administration for Network Connectivity for more 
information. This field is in different locations on the screen for different data 
module types.
Node Name
Used with Ethernet and Point-to-Point data modules. Refer to DEFINITY ECS 
Administration for Network Connectivity...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
570 Data modules 
17
Endpoint Type
Used with X.25 Data Modules. An endpoint type is a type of packet switched data 
endpoint that uses X.25 call control procedures. The X.25 Endpoint connects to 
external ports on the PGATE board and to the TDM bus via a DS1 trunk. Ports 
connected to the adjunct endpoint can be either DTEs or DCEs. The type of 
endpoint (DTE or DCE) is administrable on the “data-mod”...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
571 Data modules 
17
Highest PVC Logical Channel
Used with X.25 Data Modules. Specifies how the above endpoint type acts.
Switched Virtual Circuit
Used with X.25 Data Modules.
Digits
Used with Point-to-Point data modules. Refer to DEFINITY ECS Administration 
for Network Connectivity for more information.
Node Name
Used with Point-to-Point data modules. Refer to DEFINITY ECS Administration 
for Network...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
572 Data modules 
17
ABBREVIATED DIALING List1
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Supports Data Hot Line. This field can be left 
blank.
SPECIAL DIALING OPTION
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Identifies the type of dialing for calls when this 
data module...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
573 Data modules 
17
Hot Line Destination — Abbreviated Dialing Dial 
Code
Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and 
World Class BRI Data Modules. Appears only when the Special Dialing Option 
field is 
hot-line. Entry in this field supports Data Hot Line.
Default Dialing Abbreviated Dialing Dial Code
Only appears when the Special Dialing Option field is 
default. When the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
574 Data modules 
17
Default Mode
Used with 7500 and World Class BRI Data Modules. Used to identify the data 
mode.
Default Speed
Used with 7500 and World Class BRI Data Modules. Used to identify the data 
rate.
ASSIGNED MEMBER
Ext and Name
Used with Data Line, Announcement, Netcon, Processor/Trunk, Processor 
Interface, and System Port Data Modules. Appears the extension number and 
name of the user...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
575 Data modules 
17
Default Data Applications
Used with 7500 and World Class BRI Data Modules. Used to identify mode to be 
Used with originating data calls when the mode is not specified with the calling 
parameters. This mode is also used for terminating trunk calls that do not have 
bearer capability specified or administered connections. Refer to ‘‘
Generalized 
route selection’’ on page 1340 for...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
576 Data modules 
17
Screen 66. Data Line Data Module — if KYBD Dialing is n
Refer to ‘‘DLC Option Settings’’ on page 580 for additional information when 
assigning entries for the remaining fields on the screen.
KYBD Dialing
This option must be enabled to allow data endpoints to originate calls via the EIA 
232C interface and obtain ASCII feedback text. When enabled, the user gets the 
dial prompt. This...