Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
467 Access Endpoint 
17
Access Endpoint
This screen administers Access Endpoints and Wideband Access endpoints.
NOTE:
You can administer Wideband Access Endpoints only if, on the 
System-Parameters Customer-Options screen, the Wideband Switching field 
is 
y.
An Access Endpoint is a nonsignaling trunk that neither responds to signaling nor 
generates signaling. Access Endpoints eliminate the need to dedicate...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
468 Access Endpoint 
17
Extension
A display-only field showing the extension number as specified in the command 
line, or shows the next available extension number if 
next was entered on the 
command line. This is the extension number assigned to the nonsignaling trunk 
and used to access the trunk endpoint.
(Starting) Port
Enter seven characters.
For example, 01A0612 is in cabinet 01, carrier A, slot 06,...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
469 Access Endpoint 
17
Communication Type
Name
Enter an name for the endpoint.
Width
Only appears if the Communication Type field is 
wideband. This field cannot be 
blank.
COR
The COR is administered so that only an administered connection (AC) endpoint 
can be connected to another AC endpoint.
COS
The COS is administered (refer to ‘‘
Class of Service’’ on page 532) so that the use 
of the Call Forwarding...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
470 Access Endpoint 
17
TN
ITC (Information Transfer Capability)
This field is used to determine the type of transmission facilities to be used for 
ISDN calls originating from this endpoint. Displays when the Communication 
Type field is 
56k-data, 64k-data, or Wideband.
When adding an access endpoint with the ITC administered as unrestricted, its 
associated port has to be a channel of a DS1 circuit pack...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
471 Administered Connection 
17
Without this end validation, a user could administer an access endpoint as 
unrestricted when in fact it is restricted, that is its associated port is a member of a 
DS1 circuit pack that uses ZCS data transmission.
Administered Connection
This screen assigns an end-to-end Administered Connection (AC) between two 
access endpoints or data endpoints. The AC is established...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
472 Administered Connection 
17
Field descriptions for page 1
Screen 32. Administered Connection screen
Connection Number
This is a display-only field showing an unassigned AC number when the screen is 
accessed using an administration command such as 
change or display. 
Enable
Provides the administered connection.
Originator
Enter the assigned access endpoint/data module extension. 
Data Line circuit pack...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
473 Administered Connection 
17
n7401D phone with 7400B or 8400B data module
n7403D/7405D/7407D/7410D/7434D phone with DTDM or 7400B or 
8400B data module
n7404D or 7406D phone
n510D personal terminal
n515 BCT, 615 BCT, or 715 BCT terminal
nPC/switch connection
ISDN-BRI Line circuit pack connections, including:
n7500 data module
n7505D/7506D/7507D phone with ADM
Destination
Used to route the AC to a desired...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
474 Administered Connection 
17
Name
Authorized Time of Day
Continuous
The connection will be up all the time or re-established if the connection goes 
down.
Start Days (Sun through Sat)
These fields indicate only the days on which an attempt will be made to establish 
the AC and not necessarily the days it is active. A scheduled AC may be active 
over a number of days, and, in this situation, these fields...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
475 Administered Connection 
17
Duration
Enter the period of time that the scheduled AC should remain active. This period 
is specified in two fields separated by a colon. The maximum duration is 167 
hours and 59 minutes (that is, 1 minute less than 1 week). Only appears if the 
Continuous field is 
n.
Miscellaneous Parameters
Alarm Type
Enter the type of alarm to be generated if the AC cannot be initially...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
476 Alias Station 
17
Alarm Threshold
Only appears if an entry in the Alarm Type field is other than 
none. Enter the 
number of times an attempt to establish or reestablish an AC must fail 
consecutively before an AC alarm generates. (an alarm will be generated after the 
fourth retry has failed, thus, with the retry interval of 2 minutes, an alarm will be 
generated approximately 8 minutes after the first...