Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Collecting billing information 
447 Receiving call-charge information 
16
2. In the CDR Reports field, type y.
This ensures that the AOC information appears on the CDR report. 
3. Verify that Service Type is 
public-ntwrk.
4. In the Supplementary Service Protocol field, type a.
5. The Charge Advice field, type 
end-on-request. 
This ensures that the switch will place one request for charge information. 
This reduces the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Collecting billing information 
448 Receiving call-charge information 
16
2. In the CDR Reports field, type y.
This ensures that the PPM information appears on the CDR report. 
3. In the Direction field, type 
two-way.
4. In the PPM field, type y.
5. In the Frequency field, type 
50/12.
This is the signal frequency (in kHz). The frequency you will use depends 
on what the circuit pack you use is able to accept. See ‘‘
Trunk...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Collecting billing information 
449 Viewing call charge information 
16
Viewing call charge information
DEFINITY ECS provides two ways for you to view call-charge information: on a 
telephone display or as part of the Call Detail Recording (CDR) report. From a 
display, users can see the cost of an outgoing call, both while the call is in progress 
and at the end of the call.
Instructions
In this example, we administer...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Collecting billing information 
450 Viewing call charge information 
16
8. Press ENTER to save your changes. 
9. Now assign extension 5040 a disp-chrg button to give this user the ability to 
control the charge display. See ‘‘
Adding feature buttons’’ on page 57 for 
more information. 
More information
If you want end users to control when they view this information, you can assign a 
display button that they can press to see...

Screen reference 
451 AAR and ARS Digit Analysis Table 
17
DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
17
Screen reference
AAR and ARS Digit Analysis Table
Your switch compares dialed numbers with the dialed strings on this table and 
determines the route pattern for the number.
Screen 22. AAR Digit Analysis Table
change aar analysis Page 1 of X
AAR DIGIT ANALYSIS TABLE
Location: ___  Percent Full:  ___
Dialed       Total   Route  Call  Node  ANI
     String  Min Max...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
452 AAR and ARS Digit Analysis Table 
17
Screen 23. ARS Digit Analysis Table
Location (for the ARS Digit Analysis Table)
This is a display-only field on the ARS Digit Analysis Table.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have 
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory 
resources. 
Dialed String
User-dialed numbers are matched...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
453 AAR and ARS Digit Analysis Table 
17
An exact match is made on a user-dialed number and dialed string entries with 
wildcard characters and an equal number of digits. For example, if a user dials 
424, and there is a 424 entry and an X24 entry, the match is on the 424 entry.
Min
Max
Route Pattern
Enter the route number you want the switch to use for this dialed string. 
Valid entries Usage
0
 to 9Enter...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
454 AAR and ARS Digit Analysis Table 
17
Call Type (for AAR only)
Enter the call type associated with each dialed string. Call types indicate 
numbering requirements on different trunk networks. ISDN Protocols are listed in 
the table below. 
ISDN Protocol
Call Type (for ARS only)
Valid entries Usage
aar
Regular AAR calls
intl  The Route Index contains public network ISDN trunks that 
require international...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
455 AAR and ARS Digit Conversion Table 
17
Node Number 
ANI Reqd
AAR and ARS Digit Conversion Table
Your system uses the AAR or ARS Digit Conversion Table to change a dialed 
number for more efficient routing. Digits may be inserted or deleted from the 
dialed number. For instance, you can tell the switch to delete a 1 and an area code 
on calls to one of your locations, and avoid long-distance charges by...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
456 AAR and ARS Digit Conversion Table 
17
Screen 24. AAR Digit Conversion Table
 
Screen 25. ARS Digit Conversion Table
NOTE:
When you access the screen with display or change, the entries are sorted 
in the order of the matching pattern. Digits appear before characters.
change aar conversion Page 1 of 2
                       AAR DIGIT CONVERSION TABLE...