Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 421
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 397 Data Call Setup 15 ISDN-BRI data modules Data-terminal dialing A user can set up and disconnect data calls directly from a data terminal without using a telephone as follows: 1. The user presses ENTER a few times. If the CMD: prompt does not appear, the user presses BREAK A + T at the same time, and then presses ENTER. 2. At the CMD: prompt, the user types and presses ENTER. 3. To disconnect,...
Page 422
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 398 Default Dialing 15 Considerations nA BRI phone cannot call a data terminal, and a data terminal cannot call a BRI phone. Interactions nAbbreviated Dialing Only 22 of the 24 (maximum) digits in an abbreviated-dialing number are available for keyboard dialing. The remaining two digits must contain the wait indicator for tone detection. nCall Coverage A hunt group made up of data endpoints cannot be...
Page 423
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 399 Alphanumeric Dialing 15 Default Dialing enhances data terminal (keyboard) dialing by allowing a data-terminal user to place a data call to a preadministered destination by either pressing a Return at the DIAL: prompt (for data terminals using DCP data modules) or typing d and pressing RETURN at the CMD: prompt (for data terminals using ISDN-BRI data modules). The data-terminal user with a DCP...
Page 424
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 400 Data Hotline 15 When a user enters an alphanumeric name, the system converts the name to a sequence of digits according to an alphanumeric-dialing table. If the entered name is not found in the table, the system denies the call attempt and the user receives either an Invalid Address message (DCP) or a Wrong Address message (ISDN-BRI). Because data terminals access the switch via DCP or ISDN-BRI...
Page 425
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 401 Data Privacy 15 3. On the Data Module screen, administer the Abbreviated Dialing List1 field. The system automatically places Data Hotline calls to preassigned extensions or off-premises numbers. Calling terminals are connected to the system by a data module. Users should store the destination number in the abbreviated dialing list for future reference. Interactions nCall Forwarding — All Calls A...
Page 426
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 402 Data Restriction 15 Interactions nAttendant Call Waiting and Call Waiting Termination If Data Privacy is active, Call Waiting is denied. nBridged Call Appearance — Single-Line Telephone If you activate Data Privacy or assign Data Restriction to a station involved in a bridged call and the primary terminal or bridging user attempts to bridge onto the call, this action overrides Data Privacy and Data...
Page 427
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 403 Data Restriction 15 Administering Data Restriction 1. On the Station screen, set the Data Restriction field to y. Refer to ‘‘ Station’’ on page 882 for more information. 2. Choose one of the following trunk groups and set the Data Restriction field to y. Refer to ‘‘ ISDN trunk group’’ on page 738 and ‘‘Trunk Group’’ on page 967 for more information. nAccess nAdvanced Private-Line Termination...
Page 428
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 404 Data-Only Off-Premises Extensions 15 nPriority Calls Priority Calls are allowed if the analog station is idle. Call Waiting (including Priority Call Waiting) is denied if the station is busy. However, Priority Calls appear on the next available line appearance on multiappearance telephones. nService Observing A data-restricted call cannot be service observed. Data-Only Off-Premises Extensions...
Page 429
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 405 Data Modules — general 15 — 1-Button Transfer to Data The telephone user can transfer a call to the Data-Only Off-Premises Extension. The Data Extension button lamp on the telephone lights and the Call in Progress lamp on the data module lights during a data call. — Data Call Preindication The multiappearance telephone user presses the idle associated Data Extension button to reserve a data...
Page 430
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1 April 2000 Managing data calls 406 Data Modules — general 15 nEthernet data module. Refer to DEFINITY ECS Administration for Network Connectivity for more information. nPoint-to-Point Protocol (PPP) data module. Refer to DEFINITY ECS Administration for Network Connectivity for more information. NOTE: The 51X series Business Communications Terminals (BCTs) are not administered on the Data Module screen. The 510 BCT (equivalent to a...