Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
457 AAR and ARS Digit Conversion Table 
17
Location (for ARS only)
This is a display-only field. Values other than “all” appear only if the Multiple 
Locations field on the System Parameters Customer Options is y.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have 
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory 
resources. 
Matching...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
458 AAR and ARS Digit Conversion Table 
17
Replacement String
Net
Enter the switch network used to analyze the converted number.
Conv
ANI Req
This field applies only if the Request Incoming ANI (non-AAR/ARS) field on the 
Multifrequency-Signaling-Related System Parameters screen is 
n. Valid entries Usage
0
 to 9 
(1 to 18 digits)Enter the digits that replace the deleted portion of the dialed 
number. Leave...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
459 Abbreviated Dialing List 
17
Abbreviated Dialing List
You use the Abbreviated Dialing List screens to establish system-wide or personal 
lists for speed dialing. 
Enhanced List
The Enhanced Abbreviated Dialing List can be accessed by users to place local, 
long-distance, and international calls; to activate/deactivate features; or to access 
remote computer equipment.
NOTE:
The Abbreviated Dialing...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
460 Abbreviated Dialing List 
17
Size (multiple of 5)
The number of dial code list entries you want in this list.
Privileged
Indicates whether users of this list can dial any number in the list, regardless of the 
COR of the station from which they dial.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
461 Abbreviated Dialing List 
17
Field descriptions for page 1
Screen 27. Abbreviated Dialing Group List 
Group List
This is a display-only field when the screen is accessed using an administration 
command such as 
add or change.
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
Program Ext
Enter the extension that you want to give...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
462 Abbreviated Dialing List 
17
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size field, the system increases the number of dial codes to 
the number you specified.
Vector Directory Number extension may also be assigned.
Personal List
This screen establishes a personal dialing list for phone/data module users. The 
personal list must first be assigned to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
463 Abbreviated Dialing List 
17
Personal List
Enter the extension of the phone that will use this list.
List Number
Size (multiple of 5)
Enter the number of abbreviated dialing numbers you want to assign in multiples 
of 5, up to 100.
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
464 Abbreviated Dialing List 
17
System List
This screen implements a system abbreviated dialing list. Only one system list can 
be assigned and is administered by the System Administrator. The list can be 
accessed by users to place local, long-distance, and international calls; to 
activate/deactivate features; or to access remote computer equipment.
Page 1 of 4 of the screen
Screen 29. Abbreviated Dialing...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
465 Abbreviated Dialing List 
17
DIAL CODE
Enter the number you want the system to dial when users enter this dial code. 
While the system is waiting, a call progress tone receiver is tied up, and, since 
there are a limited number of receivers in the system, outgoing calling capability 
may be impaired.
Only DIAL CODEs 1 through 5 are displayed initially. If you enter a number 
greater than 5 in the Size...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
466 Abbreviated Dialing List 
17
Pages 1 through 4 of the screen
Screen 30. Abbreviated Dialing List — 7103A Button List
DIAL CODE
Enter the number you want to assign to each dial code (button). Any additions or 
changes apply to all 7103A fixed feature phones. While the system is waiting, a 
call progress tone receiver is tied up, and, since there are a limited number of 
receivers in the system, outgoing...