Lexmark X792 Manual

Menu itemDescription
NTP ServerLets you view the NTP Server Address
Enable Authentication
Off
OnLets you change the authentication setting to on or off
Note: Off is the factory default setting.
Settings menu
General Settings menu
UseTo
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portugues
Suomi
Russian
Polski
Greek
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSet the language of the text appearing on the display.
Note: Not all...

UseTo
Quiet Mode
Off
OnMinimize the printer noise.
Note: Off is the factory default setting.
Run Initial setup
Yes
NoRun the setup wizard.
Keyboard
Keyboard Type
English
Francais
Francais Canadien
Deutsch
Italiano
Espanol
Greek
Dansk
Norsk
Nederlands
Svenska
Suomi
Portugues
Russian
Polski
Swiss German
Swiss French
Korean
Magyar
Turkish
Czech
Simplified Chinese
Traditional Chinese
Japanese
Custom Key [x]Specify a language and custom key information for the display
keyboard.
Paper Sizes
U.S.
MetricSpecify...

UseTo
Displayed Information
Left side
Right side
Custom Text [x]Specify what is displayed on the upper corners of the home screen.
For Left side and Right side, select from the following options:
None
IP Address
Hostname
Contact Name
Location
Date/Time
mDNS/DDNS Service Name
Zero Configuration Name
Custom Text [x]
Model Name
Notes:
IP Address is the factory default setting for Left side.
Date/Time is the factory default setting for Right side.
Displayed Information (continued)
[x] Toner
Waste Toner...

UseTo
Displayed Information (continued)
Paper Jam
Load Paper
Service ErrorsCustomize the displayed information for certain menus.
Select from the following options:
When to Display
Do not display
Alternate
Message to display
Default
Alternate
Default
[text entry]
Alternate
[text entry]
Notes:
Do not display is the factory default setting for Display.
Default is the factory default setting for Message to display.
Home screen customization
Change Language
Copy
Copy Shortcuts
Fax
Fax Shortcuts
E‑mail
E‑mail...

UseTo
Output Lighting
Normal/Standby Mode
Dim
Bright
OffSet the output lighting for the standard bin.
Note: Bright is the factory default setting.
Error Lighting
On
OffEnable the indicator light to blink red when the printer encounters
an error.
Note: On is the factory default setting.
Audio Feedback
Button Feedback
On
Off
Volume
1–10Specify the audio volume for the buttons.
Notes:
On is the factory default setting for Button Feedback.
5 is the factory default setting for Volume.
Tactile Touchscreen...

UseTo
LocationSpecify the location.
Note: The location is stored on the Embedded Web Server.
Alarms
Alarm Control
Cartridge Alarm
Stapler Alarm
Hole Punch AlarmSet an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
Single is the factory default setting for Alarm Control. This
sounds three quick beeps.
Off is the factory default setting for Cartridge Alarm, Stapler
Alarm, and Hole Punch Alarm.
Continuous repeats three...

UseTo
Timeouts
Print Timeout
Disabled
1–255Set the amount of time in seconds the printer waits to receive an
end-of-job message before canceling the rest of the job.
Notes:
90 is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
Print Timeout is available only when using PCL emulation.
This has no effect on PostScript emulation print jobs.
Timeouts
Wait Timeout
Disabled...

UseTo
Press Sleep Button
Do Nothing
Sleep
HibernateDetermine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Do Nothing
Sleep
HibernateDetermine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: Do Nothing is the factory default setting.
Factory Defaults
Do Not Restore
Restore NowUse the printer factory default settings except the Network/Ports
menu settings....

UseTo
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9Set the amount of color the printer can detect from the original document.
Note: This menu item is applicable only when Color is set to Auto.
Allow color copies
On
OffEnable color in copies.
Notes:
On is the factory default setting.
Setting this to Off hides all color‑specific menus.
This setting overrides the Color setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sidedSpecify whether an...

UseTo
Original Size
Letter
Legal
Executive
Folio
Statement
Oficio (Mexico)
Universal
Auto Size Sense
Mixed Sizes
A4
A5
A6
JIS B5
Custom Scan Size [x]
Book Original
Business Card
3 x 5 in.
4 x 6 in.
ID CardSpecify the size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory default
setting.
Copy To Source
Tray [x]
Auto Size Match
Manual FeederSpecify the paper source for copy jobs.
Note: Tray 1 is the factory default setting.
Transparency Separators...