Lexmark X792 Manual

Bin Setup menu
Menu itemDescription
Output Bin
Standard Bin
Bin [x]Specifies the default output bin
Note: Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type AssignmentSpecifies configuration options for output bins
Note: Mailbox is the factory default setting.
Assign Type/Bin
Plain Paper Bin
Card Stock Bin
Transparency Bin
Recycled Bin
Glossy Bin
Heavy Glossy Bin
Labels Bin
Vinyl Labels Bin
Bond Bin
Envelope Bin
Rough Envelope Bin
Letterhead Bin...

UseTo
Network Setup PagePrint a report containing information about the network settings of the printer.
Note: This menu item appears only in network printers or printers connected
to print servers.
Network [x] Setup PagePrint a report containing information about the network settings of the printer.
Note: This menu item appears only in network printers or printers connected
to print servers, and when there is more than one network option installed.
Shortcut ListPrint a report containing information...

Network/Ports menu
Active NIC menu
Menu itemDescription
Active NIC
Auto
[list of available network cards]Notes:
Auto is the factory default setting.
This menu item appears only if an optional network card is installed.
Standard Network or Network [x] menus
Note: Only active ports appear in this menu; all inactive ports are omitted.
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language...

Menu itemDescription
Network Buffer
Auto
3KB to [maximum size allowed]Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1‑KB increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Network Buffer, disable or
reduce the size of the parallel, serial, and USB buffers.
Changing this setting...

Network Reports menu
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network Setup > Reports or Network
Reports
Menu itemDescription
Print Setup PagePrints a report containing information about the network printer settings, such as the TCP/IP address
Network Card menu
UseTo
View Card Status
Connected
DisconnectedView the connection status of the network card.
View Card SpeedView the speed of an active network card.
Network...

UseTo
NetmaskView or change the current TCP/IP netmask.
GatewayView or change the current TCP/IP gateway.
Enable DHCP
On
OffSpecify the DHCP address and parameter assignment.
Note: On is the factory default setting.
Enable RARP
On
OffSpecify the RARP address assignment setting.
Note: Off is the factory default setting.
Enable BOOTP
On
OffSpecify the BOOTP address assignment setting.
Note: On is the factory default setting.
Enable AutoIP
Yes
NoSpecify the Zero Configuration Networking setting.
Note: Yes...

Note: This menu is available only for network models or printers attached to print servers.
Menu itemDescription
Enable IPv6
On
OffEnables IPv6 in the printer
Note: On is the factory default setting.
Auto Configuration
On
OffSpecifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
Set HostnameLets you set the hostname
Note: These settings can be changed only from the Embedded Web
Server. View Address
View...

Menu itemDescription
Compatibility
802.11b/g/n
802.11n
802.11b/gSpecifies the wireless standard for the wireless network
Note: The 802.11b/g/n is the factory default setting.
Choose Network
[list of available networks]Lets you select an available network for the printer to use
View Signal QualityLets you view the quality of the wireless connection
View Security ModeLets you view the encryption method that a wireless network uses
Note: Wi-Fi Protected Setup (WPS) is a simple and secure configuration that...

Standard USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When set to Off, the printer does not examine incoming data. The printer uses
PostScript emulation if the PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PS SmartSwitch is set to
Off.
PS...

Menu itemDescription
Job Buffering
Off
On
AutoTemporarily stores print jobs on the printer hard disk before printing
Notes:
Off is the factory default setting.
On buffers jobs on the printer hard disk.
Auto buffers print jobs only if the printer is busy processing data from another
input port.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is then updated.
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh...