Lexmark X651de User Manual
Have a look at the manual Lexmark X651de User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Display itemFunction Cancel Jobs Opens the Cancel Jobs screen. The Cancel Jobs screen shows three headings: Print, Fax, and Network. The following items are available under the Print, Fax, and Network headings: Print job Copy job Fax profile FTP E-mail send Each heading has a list of jobs shown in a column under it which can show only three jobs per screen. Each job appears as a button which you can touch to access information about the job. If more than three jobs exist in a column, then an arrow appears enabling you to scroll through the jobs. Using the touch-screen buttons Note: Depending on your options and administrative setup, your screens and buttons may vary from those shown. Sample touch screen ButtonFunction Home Returns to the home screen Scroll down Opens a drop‑down list Learning about the printer21 Downloaded From ManualsPrinter.com Manuals
ButtonFunction Left scroll decrease Scrolls to another value in decreasing order Right scroll increase Scrolls to another value in increasing order Left arrow Scrolls left Right arrow Scrolls right Submit Saves a value as the new user default setting Back Navigates back to the previous screen Other touch-screen buttons ButtonFunction Down arrow Moves down to the next screen Up arrow Moves up to the next screen Unselected radio button This is an unselected radio button. The radio button is gray to show it is unselected. Learning about the printer22 Downloaded From ManualsPrinter.com Manuals
ButtonFunction Selected radio button This is a selected radio button. The radio button is blue to show it is selected. Cancel Jobs Opens the Cancel Jobs screen. The Cancel Jobs screen shows three headings: Print, Fax, and Network. The following items are available under the Print, Fax, and Network headings: Print job Copy job Fax profile FTP E-mail send Each heading has a list of jobs shown in a column under it which can show only three jobs per screen. Each job appears as a button which you can touch to access information about the job. If more than three jobs exist in a column, then an arrow appears enabling you to scroll through the jobs. Continue Touch this button when more changes need to be made for a job or after clearing a paper jam. Cancel Cancels an action or a selection Cancels out of a screen and returns to the previous screen Select Selects a menu or menu item Learning about the printer23 Downloaded From ManualsPrinter.com Manuals
Features FeatureDescription Menu trail line: Menus > Settings > Copy Settings > Number of CopiesA Menu trail line is located at the top of each menu screen. This feature acts as a trail, showing the path taken to arrive at the current menu. It gives the exact location within the menus. Touch any of the underlined words to return to that menu or menu item. The Number of Copies is not underlined since this is the current screen. If you touch an underlined word on the Number of Copies screen before the Number of Copies is set and saved, then the selection is not saved, and it does not become the user default setting. Attendance message alert If an attendance message occurs which closes a function, such as copy or fax, then a solid red dot appears over the function button on the home screen. This indicates that an attendance message exists. Learning about the printer24 Downloaded From ManualsPrinter.com Manuals
Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal. Available internal options Memory cards –Printer memory –Flash memory –Fonts Firmware cards –Bar Code and Forms –IPDS and SCS/TNe –PrintCryptionTM –PRESCRIBE Printer hard disk LexmarkTM Internal Solutions Ports (ISP) –RS-232-C Serial ISP –Parallel 1284-B ISP –MarkNetTM N8150802.11 b/g/n Wireless ISP –MarkNet N8130 10/100 Fiber ISP –MarkNet N8120 10/100/1000 Ethernet ISP MarkNet N8110 V-34 Fax Card Additional printer setup25 Downloaded From ManualsPrinter.com Manuals
Accessing the system board to install internal options Note: This operation requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1Open the system board door. 2Loosen the screw(s) on the system board cover. Additional printer setup26 Downloaded From ManualsPrinter.com Manuals
3Remove the system board cover. 4Use the illustration below to locate the appropriate connector. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1 2 3 4 1Firmware and flash memory card connectors 2Memory card connector 3Lexmark Internal Solutions Port or printer hard disk connector 4Fax card connector Additional printer setup27 Downloaded From ManualsPrinter.com Manuals
Installing a memory card Note: This task requires a flathead screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. An optional memory card can be purchased separately and attached to the system board. To install the memory card: 1Access the system board. 1 2 3 2Unpack the memory card. Note: Avoid touching the connection points along the edge of the card. 3Open the memory card connector latches. Additional printer setup28 Downloaded From ManualsPrinter.com Manuals
4Align the notches on the memory card with the ridges on the connector. 1 2 1Notches 2Ridges 5Push the memory card straight into the connector until it snaps into place. 6Replace the system board cover and close the system board door. 2 3 1 Installing a flash memory or firmware card Note: This task requires a flathead screwdriver. Additional printer setup29 Downloaded From ManualsPrinter.com Manuals
The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed, but the connectors are interchangeable. CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1Access the system board. 1 2 3 2Unpack the card. Note: Avoid touching any electrical components on the card. 3Holding the card by its sides, align the plastic pins on the card with the holes on the system board. 1Plastic pins 2Metal pins Additional printer setup30 Downloaded From ManualsPrinter.com Manuals