Lexmark X651de User Manual

							Maintaining the printer
Periodically, certain tasks are required to maintain optimum print quality.
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2Remove paper from the standard exit bin.
3Dampen a clean, lint‑free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
4Wipe only the outside of the printer, making sure to include the standard exit bin.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5Make sure the paper support and standard exit bin are dry before beginning a new print job.
Cleaning the scanner glass
Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.
1Slightly dampen a soft, lint-free cloth or paper towel with water.
2Open the scanner cover.
3Wipe the scanner glass until it is clean and dry. Maintaining the printer251
Downloaded From ManualsPrinter.com Manuals 
						

							4Wipe the white underside of the scanner cover until it is clean and dry.
5Open the bottom ADF door.
1
2
6Wipe the ADF scanner glass under the ADF door.
7Close the bottom ADF door.
8Wipe the scanner glass (flatbed) and backing material by moving the cloth or paper towel from side to side.
9Close the scanner cover.
Adjusting scanner registration
Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner
registration:
1Turn the printer off.
2Clean the scanner glass and backing material.
3Hold down 2ABC and 6MNO while turning the printer on.
4Release the buttons when the screen with the progress bar appears.
The printer performs a power‑on sequence, and then the Configuration menu appears.
5Touch the down arrow until Scanner Manual Registration appears.
6Touch Scanner Manual Registration.
7Touch Print Quick Test to print a registration page.
8Choose the section of the scanner to align. Maintaining the printer252
Downloaded From ManualsPrinter.com Manuals 
						

							To align the scanner glass (flatbed):
aPlace the Quick Test page facedown on the scanner glass.
bTouch Copy Quick Test.
The scanner prints a copy of the Quick Test page.
cTouch Flatbed.
dUse the copy of the Quick Test page to adjust the Left Margin and Top Margin settings.
eTouch Submit.
fTouch Copy Quick Test and compare the new copy to the original.
Repeat the flatbed alignment steps until the position on the page of the Quick Test copy closely matches the
original.
To align the ADF:
aDo one of the following:
To align the ADF front: place the Quick Test page faceup, short edge first into the ADF.
To align the ADF back: place the Quick Test page facedown, short edge first into the ADF.
bTouch Copy Quick Test.
The scanner prints a copy of the Quick Test page.
cTouch ADF Front or ADF Back.
dUse the copy of the Quick Test page to adjust the Horizontal Adjust and Top Margin settings.
eTouch Submit.
fTouch Copy Quick Test and compare the new copy to the original.
Repeat the ADF alignment steps until the position on the page of the Quick Test copy closely matches the original.
9Touch Back.
10Touch Exit Configuration.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them. Maintaining the printer253
Downloaded From ManualsPrinter.com Manuals 
						

							Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Salty air
Corrosive gases
Heavy dust
Conserving supplies
There are some settings you can change from the printer control panel that will help you conserve toner and paper.
For more information, see “Supplies menu,” “Quality menu,” and “Finishing menu.”
If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy
before printing the remaining copies.
Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the printer control panel
1Make sure the printer is on and Ready appears.
2On the home screen, touch Status/Supplies.
Note: If Status/Supplies is not on the home screen, then print a menu settings page to review the status of the
supplies.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2Click Device Status. The Device Status page appears, displaying a summary of supply levels. Maintaining the printer254
Downloaded From ManualsPrinter.com Manuals 
						

							Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place
where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.
Ordering print cartridges
When 88 Cartridge low appears or when the print becomes faded:
1Remove the print cartridge.
2Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute toner.
3Reinsert the cartridge and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
Recommended print cartridges and part numbers
Part nameLexmark Return Program
CartridgeRegular cartridge
For the US and Canada
Print cartridge X651A11A X651A21A
High Yield Print Cartridge X651H11A X651H21A
Extra High Yield Print Cartridge X654X11A X654X21A
High Yield Return Program Print Cartridge for Label Applications X651H04A Not applicable
Extra High Yield Return Program Print Cartridge for Label Applications X654X04A Not applicable
For Europe, the Middle East, and Africa
Print cartridge X651A21E X651A11E
High Yield Print Cartridge X651H21E X651H11E
Extra High Yield Print Cartridge X654X21E X654X11E
High Yield Return Program Print Cartridge for Label Applications X651H04E Not applicable
Extra High Yield Return Program Print Cartridge for Label Applications X654X04E Not applicable
For the Asia Pacific Region, including Australia and New Zealand
Print cartridge X651A21P X651A11P
Maintaining the printer255
Downloaded From ManualsPrinter.com Manuals 
						

							Part nameLexmark Return Program
CartridgeRegular cartridge
High Yield Print Cartridge X651H21P X651H11P
Extra High Yield Print Cartridge X654X21P X654X11P
High Yield Return Program Print Cartridge for Label Applications X651H04P Not applicable
Extra High Yield Return Program Print Cartridge for Label Applications X654X04P Not applicable
For Latin America
Print cartridge X651A21L X651A11L
High Yield Print Cartridge X651H21L X651H11L
Extra High Yield Print Cartridge X654X21L X654X11L
High Yield Return Program Print Cartridge for Label Applications X651H04L Not applicable
Extra High Yield Return Program Print Cartridge for Label Applications X654X04L Not applicable
Ordering a maintenance kit
When 80 Routine maintenance needed appears, order a maintenance kit. The maintenance kit contains all
the items necessary to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
Notes:
Using certain types of paper may require more frequent replacement of the maintenance kit. The charge roll,
fuser, pick rollers, and transfer roller can also be individually ordered and replaced as necessary.
To check the fuser type (T1 or T2) installed in the printer, remove the print cartridge to view the label on the
fuser.
Part namePart number
Maintenance kit 40X4723 (100 V T1 fuser)
40X4724 (110 V T1 fuser)
40X4765 (220 V T1 fuser)
40X4766 (100 V T2 fuser)
40X4767 (110 V T2 fuser)
40X4768 (220 V T2 fuser)
Ordering a fuser
To check the fuser type (T1 or T2) installed in the printer, remove the print cartridge to view the label on the fuser. Maintaining the printer256
Downloaded From ManualsPrinter.com Manuals 
						

							Part namePart number
T1 fuser 40X1870 (100 V)
40X4418 (110 V)
40X1871 (220 V)
T2 fuser 40X5853 (100 V)
40X5854 (110 V)
40X5855 (220 V)
Ordering an ADF maintenance kit
The ADF maintenance kit contains all the items necessary to replace the ADF pick mechanism and the ADF separator
roller.
See the following table for the maintenance kit part number for your specific printer.
Part namePart number
ADF Maintenance kit 40X4769
Ordering a transfer roller
When toner smudges appear on the front or back of printed pages, order a replacement transfer roller.
Part namePart number
Transfer roll assembly 40X1886
Ordering charge rolls
When toner fog or background shading appears on printed pages, order replacement charge rolls.
Part namePart number
Charge roll assembly 40X5852
Ordering pick rollers
When the paper fails to properly feed from the tray, order new pick rollers.
Part namePart number
Pick rollers 40X4308
Ordering ADF replacement parts
Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the
automatic document feeder. Maintaining the printer257
Downloaded From ManualsPrinter.com Manuals 
						

							Part namePart number
ADF pick assembly 3017345
ADF separator roll 3017348
Ordering staple cartridges
When Staples Low or Staples Empty appears, order the specified staple cartridge.
For more information, see the illustrations inside the stapler door.
Part namePart number
Staple Cartridges–3 pack 25A0013
Recycling Lexmark products
To return Lexmark products to Lexmark for recycling:
1Visit our Web site at www.lexmark.com/recycle.
2Find the product type you want to recycle, and then select your country from the list.
3Follow the instructions on the computer screen.
Moving the printer
Before moving the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to move it safely.
CAUTION—POTENTIAL INJURY:  Before moving the printer, follow these guidelines to avoid personal injury or
printer damage: Maintaining the printer258
Downloaded From ManualsPrinter.com Manuals 
						

							Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
Disconnect all cords and cables from the printer before moving it.
Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same
time.
Notes:
–Remove all printer options before moving the printer.
–Use the handholds located on both sides of the printer to lift it off the optional drawer.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer
warranty.
Moving the printer to another location
The printer and options can be safely moved to another location by following these precautions:
Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart
used to move the options must have a surface able to support the dimensions of the options.
Keep the printer in an upright position.
Avoid severe jarring movements.
Setting the printer up in a new location
Allow the following recommended amount of space around the printer:
1 2 351 2 35
44
1Right Side 20 cm (8 in.)
2Left Side 31 cm (12 in.)
3Front 51 cm (20 in.)
4Rear 20 cm (8 in.)
5Top 31 cm (12 in.)
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer259
Downloaded From ManualsPrinter.com Manuals 
						

							Administrative support
Finding advanced networking and administrator information
This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking
Guide on the Software and Documentation CD and the Embedded Web Server Administrators Guide on the Lexmark
Web site at www.lexmark.com.
Using the Embedded Web Server
If the printer is installed on a network, the Embedded Web Server is available for a range of functions including:
Viewing a virtual display of the printer control panel
Checking the status of the printer supplies
Configuring printer settings
Configuring network settings
Viewing reports
To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.
Notes:
If you do not know the IP address of the printer, then print a network setup page and locate the IP address in
the TCP/IP section.
For more information, see the Networking Guide on the Software and Documentation CD and the Embedded
Web Server Administrators Guide on the Lexmark Web site at www.lexmark.com.
Checking the device status
Using the Embedded Web Server, you can view paper tray settings, the level of toner in the print cartridge, the
percentage of life remaining in the maintenance kit, and capacity measurements of certain printer parts. To view the
device status:
1Type the printer IP address in the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2Click Device Status.
Setting up e‑mail alerts
You can have the printer send you an e‑mail when the supplies are getting low or when the paper needs to be changed,
added, or unjammed. Administrative support260
Downloaded From ManualsPrinter.com Manuals