Home > Lexmark > Printer > Lexmark X646ef User Manual

Lexmark X646ef User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark X646ef User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Moving the MFP
    101
    Maintaining the MFP
    Moving the MFP
    Follow these guidelines to move the MFP within the office or to prepare the MFP for shipment.
    CAUTION: Follow these guidelines to avoid injuring yourself or damaging the MFP.
    •Always use at least three people to lift the MFP.
    •Always turn off the MFP using the power switch.
    •Disconnect all cords and cables from the MFP before attempting to move the MFP.
    •Failure to repackage the MFP properly for shipment can result in damage to the MFP not covered by the MFP 
    warranty.
    •Damage to the MFP caused by improper moving is not covered by the MFP warranty.
    Moving the MFP within the office
    The MFP can be safely moved from one location within an office to another following these precautions:
    •The MFP must remain in an upright position.
    •Any cart used to move the MFP should have a surface able to support the full footprint of the MFP.
    •Severe jarring movements may cause damage to the MFP and must be avoided.
    Preparing the MFP for shipment
    To transport the MFP by vehicle or by commercial carrier, the MFP must be repackaged for shipment using the proper 
    packaging. The MFP package must be securely fastened to its pallet. Do not use a shipping or transport method that 
    requires the MFP to be shipped without a pallet. The MFP must stay upright throughout the shipment. If you do not have all 
    the original packaging, contact your local service representative to order the repackaging kit. Additional instructions for 
    repackaging the MFP are provided in the repackaging kit.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							4
    Contents
    Chapter 1: Learning about the MFP  .................................................................................. 8
    Identifying the MFP  .......................................................................................................................................... 8
    Using the scanner  ............................................................................................................................................ 9
    Configured models ......................................................................................................................................... 10
    Understanding the MFP control panel  ........................................................................................................... 11
    Using the LCD touch-screen buttons  ............................................................................................................. 17
    Menus ............................................................................................................................................................ 23
    Chapter 2: Copying  ........................................................................................................... 24
    Quick copy  ..................................................................................................................................................... 24
    Multiple page copying  .................................................................................................................................... 24
    Using the flatbed  ............................................................................................................................................ 25
    Understanding the copy screens and options  ................................................................................................ 25
    Copying from one size to another  .................................................................................................................. 27
    Making transparencies  ................................................................................................................................... 27
    Copying to letterhead ..................................................................................................................................... 27
    Copying photographs ..................................................................................................................................... 27
    Making copies using media from a selected tray  ........................................................................................... 28
    Copying mixed-sized media ........................................................................................................................... 28
    Setting the duplex option  ............................................................................................................................... 29
    Reducing and enlarging copies  ..................................................................................................................... 29
    Adjusting copy quality  .................................................................................................................................... 29
    Setting collation options  ................................................................................................................................. 30
    Placing separator sheets between copies  ..................................................................................................... 30
    Setting paper saving options  ......................................................................................................................... 30
    Placing the date and time at the top of each page  ........................................................................................ 31
    Placing an overlay message on each page  ................................................................................................... 31
    Creating a custom job (job build)  ................................................................................................................... 31
    Canceling a copy job  ..................................................................................................................................... 32
    Copy tips  ........................................................................................................................................................ 32
    Chapter 3: E-mail  ..............................................................................................................33
    Entering an e-mail address  ............................................................................................................................ 33
    Using a shortcut number  ................................................................................................................................ 33
    Using the address book  ................................................................................................................................. 34
    E-mailing to a profile  ...................................................................................................................................... 34
    Adding e-mail subject and message information  ........................................................................................... 34
    Changing the output file type  ......................................................................................................................... 35
    E-mailing color documents  ............................................................................................................................ 35
    Downloaded From ManualsPrinter.com Manuals
    X644eX646eX646dte
    Input capacity 500 sheets 500 sheets 1000 sheets
    Standard memory 256MB 256MB 256MB
    Maximum memory capacity, non-network/
    network768MB 768MB 768MB
    Hard drive No Yes Yes
    Option card connectors 1 1 1
    Duplex ability Duplex in, simplex out Duplex in, simplex out Duplex in, duplex out
    Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals
    Copy
    Fax
    E-mail
    FT P
    Status/
    Supplies200.01 Paper jam, [x] pages 
    jammed. Leave paper in bin.Menus
    Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals
    MessageAction
    42.xy Cartridge region mismatch
    Note:x = the MFP region, y = the cartridge 
    regionInstall the correct cartridge for the MFP region.
    Region codes are:
    MFP region Cartridge region Location
    REGCDW 0  Worldwide
    REGCDA 1  USA and Canada
    REGCDE 2  EMEA
    REGCDR  3  Asia Pacific Region
    REGCDL 4  Latin America
    Downloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com ManualsDownloaded From ManualsPrinter.com Manuals 
    						
    							Access doors and trays
    103
    Clearing jams
    Access doors and trays
    The following illustration shows the path that print media travels through the MFP. The path varies depending on the input 
    source (trays, multipurpose feeder, envelope feeder) you are using.
    The numbers in following illustration indicate the numbers that can appear on the control panel and designate the general 
    area of a paper jam.
    CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
    a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
    must have a printer stand or printer base. More information is available on our Lexmark Web site at 
    www.lexmark.com/multifunctionprinters.
    Understanding jam messages
    The following table lists the jam messages that can occur and the action necessary to clear the message. The jam 
    message indicates the area where the jam occurred. However, it is best to clear the entire paper path to ensure you have 
    cleared all possible jams.
    MessageWhat to do*
    200 and 201 Paper Jam Remove 
    CartridgeOpen the bottom then top front covers, remove the print cartridge, and then 
    remove the jam.
    202 Paper Jam Open Rear DoorOpen the rear door on the MFP, and remove the jam.
    23x Paper Jam Check DuplexRemove the duplex tray from the duplex unit, raise duplex deflector, and 
    remove the jam. Open the rear duplex door, and remove the jam.
    24x Paper Jam Check Tray Open each tray, and remove any jammed media.
    250 Paper Jam Check MP FeederRemove all media from the multipurpose feeder, flex and stack the media, 
    reload the multipurpose feeder, and adjust the guide.
    202 Paper 
    Jam 
    23x Paper 
    Jam
    24x Paper Jam 201 Paper Jam200 Paper Jam
    260 Paper Jam
    23x Paper Jam250 Paper Jam
    Doors and trays
    200 Paper 
    Jam
    201 Paper 
    Jam
    250 Paper 
    Jam260 Paper 
    Jam
    24x Paper 
    Jam 23x Paper 
    Jam
    23x Paper 
    Jam
    Path and locations
    202 Paper 
    Jam
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    104
    Clearing jams
    Clearing jams
    Although there are several places a jam can occur, clearing the paper path is fairly easy. Paper jams can occur in three 
    areas: the front of the MFP, inside the MFP, and at the rear of the MFP. Jams in the front of the MFP occur in the input 
    options or the duplex tray. Jams inside the MFP occur in two locations and require the removal of the print cartridge. Jams 
    can also occur at the rear of the MFP or duplex unit.
    Note:The following clearing jam instructions may seem out of numerical sequence. However, they have 
    been grouped to help you quickly clear the print path. To go to a specific jam, see Understanding 
    jam messages.
    250 Paper Jam Check MP Feeder
    1Remove the paper from the multipurpose feeder.
    2Flex, fan, and restack the media, and place it into the multipurpose feeder.
    3Load the print media.
    4Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.
    5Touch Continue. 260 Paper Jam Check Env FeederLift the envelope weight, remove all envelopes, flex and stack the envelopes, 
    reload the envelope feeder, and adjust the guide.
    290, 291, 292, and 294 Scanner JamsRemove all original documents from the ADF. Open the ADF cover, and 
    remove any jammed pages. Open the document cover, and remove any 
    jammed pages. Open the scan unit access door, and remove any jammed 
    pages.
    MessageWhat to do*
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    105
    Clearing jams
    260 Paper Jam Check Env Feeder
    The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed.
    1Lift the envelope weight.
    2Remove all envelopes.
    If the jammed envelope has entered the MFP and cannot be pulled out, remove the envelope feeder.
    aLift the envelope feeder out of the MFP, and then set it aside.
    bRemove the envelope from the MFP.
    Note:If you cannot remove the envelope, the print cartridge will have to be removed. See 200 and 201 
    Paper Jam Remove Cartridge for more information.
    cReinstall the envelope feeder. Make sure it snaps into place.
    3Flex and stack the envelopes.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    106
    Clearing jams
    4Load the envelope feeder.
    5Adjust the guide.
    6Lower the envelope weight.
    7Touch Continue.
    23x and 24x jams
    Paper jams in these areas can occur on the incline surface of a tray or across more than one tray. To clear these areas:
    1Open the MFP paper tray, and remove any jammed media.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    107
    Clearing jams
    2Open the duplex tray.
    To remove the media, pull up.
    3Open any optional trays beginning at the top, and remove any jammed media.
    Pull the print media either up or down. If it does not pull easily one way, try the other way.
    CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
    a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
    must have a printer stand or printer base. More information is available on our Lexmark Web site at 
    www.lexmark.com/multifunctionprinters.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    108
    Clearing jams
    4If you have an optional 2000-sheet feeder, open the front door, press the elevator button to lower the tray, remove 
    the jam, and make sure the stack of print media is neat and aligned.
    5Touch Continue.
    CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either 
    a printer stand or printer base if you are using a 2000-sheet drawer. Certain other configurations also 
    must have a printer stand or printer base. More information is available on our Lexmark Web site at 
    www.lexmark.com/multifunctionprinters.
    1234567890#
    Elevator button
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    109
    Clearing jams
    200 and 201 Paper Jam Remove Cartridge
    1Push the release latch, and lower the multipurpose feeder.
    2Push the release latch, and open the top front cover.
    CAUTION: The inside of the MFP may be hot. Allow the MFP to cool before touching any internal 
    components.
    3Lift and pull the print cartridge out of the MFP.
    Warning:Do not touch the photoconductor drum on the underside of the cartridge. Use the cartridge handle 
    whenever you are holding the cartridge.
    4Place the print cartridge aside.
    Note:Do not leave the cartridge exposed to light for extended periods.
    Note:The print media may be covered with unfused toner, which can stain garments and skin.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Clearing jams
    110
    Clearing jams
    5Pull the print media up and toward you.
    CAUTION: Do not use any pointed objects to remove the paper. This could cause personal injury or damage 
    to the MFP.
    Warning:If the print media does not move immediately when you pull, stop pulling. You need to access the 
    print media from the MFP rear door. 
    6Align and reinstall the toner cartridge.
    7Close the top front cover.
    8Close the multipurpose feeder.
    9Touch Continue.
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark X646ef User Manual