Lexmark X264 Service Manual

Repair information 4-33
7013-XXX
Left side printer cover removal
1.Remove the rear door and cover. See “Rear door and cover removal” on page 4-69.
2.Remove the left side scanner cover. See “Left side scanner cover removal” on page 4-35.
3.Remove the screw (A) from the font of the printer.
4.Press in on the tabs (B).
A
B 

4-34  Service Manual 7013-XXX
5.Swing the left side printer cover out, and lift to remove. 

Repair information 4-35
7013-XXX
Left side scanner cover removal
1.Remove the front scanner cover. See “Left side scanner cover removal” on page 4-35.
2.Remove the screw (A) from the front of the printer.
3.Remove the screw (B) from the rear of the printer.
A
B 

4-36  Service Manual 7013-XXX
4.Lift up on the ADF scanner cover, and disconnect the left side scanner cover.
5.Remove the left side scanner cover. 

Repair information 4-37
7013-XXX
Lower access door assembly removal
1.Remove the MPF tray. See “MPF tray removal” on page 4-61.
2.Disconnect the right door hinge (A) from the printer frame.
3.Disconnect the left door hinge (B) from the printer frame.
A
B 

4-38  Service Manual 7013-XXX
4.Disconnect the fuser link (C).
5.Remove the lower access door assembly.
C 

Repair information 4-39
7013-XXX
LVPS/HVPS removal
1.Remove the rear door cover. See “Rear door and cover removal” on page 4-69.
2.Remove the left side printer cover. See “Left side printer cover removal” on page 4-33.
3.Place the printer on its right side.
Note:  Be careful to not mar the finish of the printer.
4.Disconnect the fuser power cable (A).
5.Remove the two screws (B) from the right rear foot, and the four screws (C) from the LVPS/HVPS shield.
A
CB 

4-40  Service Manual 7013-XXX
6.Lift the LVPS/HVPS, and disconnect the three cables (D).
Note:  Squeeze the clip to remove the cables from their connectors (E).
D
E 

Repair information 4-41
7013-XXX
7.Disconnect the transfer roll cable (F).
8.Lift and remove the LVPS/HVPS.
F 

4-42  Service Manual 7013-XXX
Main motor gear drive removal
1.Remove the left side printer cover. See “Left side printer cover removal” on page 4-33.
2.Disconnect the fuser link (A) from the front access door.
3.Place the printer on its right side.
Note:  Be careful to not mar the finish of the printer.
4.Remove the four screws (B) from the main motor gear drive.
A
B