Lexmark X 950 User Manual

Menu item Description
Robust XON
Off
OnDetermines whether the printer communicates availability to the computer
Notes:
Off is the factory default setting.
This menu item applies only to the serial port if Serial Protocol is set to
XON/XOFF.
Baud
9600
19200
38400
57600
115200
138200
172800
230400
345600
1200
2400
4800Specifies the rate at which data can be received through the serial port
Notes:
9600 is the factory default setting.
138200, 172800, 230400, and 345600 baud rates are only displayed in
the...

SMTP Setup menu
Menu item Description
Primary SMTP GatewaySpecifies SMTP server gateway and port information
Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30Specifies the amount of time in seconds before the server stops trying
to send an e‑mail
Note: 30 seconds is the factory default setting.
Reply AddressSpecifies a reply address of up to 128 characters in the e-mail sent
by the printer
Use SSL
Disabled
Negotiate...

Security menu
Editing Security Setups menu
Menu item Description
Edit Backup PasswordCreates a backup password
Note: This menu item will only appear if a backup password exists.
Edit Building BlocksEdits the Internal Accounts, NTLM, various Setups, Password, and PIN
Edit Security TemplatesAdds or edits a Security Template
Edit Access ControlsControls access to printer menus, firmware updates, held jobs, and other access
points
Miscellaneous Security Settings menu
Menu item Description
Login Restrictions...

Menu item Description
Security Reset Jumper
Access controls=”No Security”
No 
Effect
Reset factory security defaultsChanges the value of the security settings
Notes:
Access controls=”No Security” retains all the security information that the
user has defined. “No Security" is the factory default setting.
“No Effect” means the reset has no effect on the device’s security
configuration.
“Reset factory security defaults” deletes all security information that the
user has defined, and assigns the factory...

Menu item Description
Repeat Job Expiration
Off
1 hour
4 hours
24 hours
1 weekSets a time limit on how long the printer stores print jobs
Verify Job Expiration
Off
1 hour
4 hours
24 hours
1 weekSets a time limit on how long the printer stores print jobs needing verification
Reserve Job Expiration
Off
1 hour
4 hours
24 hours
1 weekSets a time limit on how long the printer stores print jobs for printing at a later time
Note: Off is the factory default setting.
Erase Temporary Data Files menu
Erase Temporary...

Use To
Scheduled Method
Single pass
Multi‑passSpecify a method for a scheduled disk wiping.
Note: Single pass is the factory default setting.
Security Audit Log menu
Menu item Description
Export LogEnables an authorized user to export the security log
Notes:
To export the log from the printer control panel, a flash drive must be
attached to the printer.
From the Embedded Web Server, the log can be downloaded to a
computer.
Delete Log
Ye s
NoSpecifies whether audit logs are deleted
Note: Yes is the factory...

Menu item Description
Manually Set Date and Time Note: Date/Time is set in YYYY-MM-DD HH:MM:SS format.
Time Zone Note: GMT is the factory default setting.
Automatically Observe DST
On
OffNote: On is the factory default setting and uses the applicable Daylight
Saving Time associated with the Time Zone setting.
Custom Time Zone Setup
DST Start Week
DST Start DayOff
DST Start Month
DST Start Time
DST End Week
DST End Day
DST End Month
DST End Time
DST OffsetEnables the user to set up the time zone
Enable...

Settings menu
General Settings menu
Menu item Description
Display Language
English
Francais
Deutsch
Italiano
Espanol
Greek
Dansk
Norsk
Nederlands
Svenska
Portugues
Suomi
Russian
Polski
Magyar
Tu r k c e
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Note: All languages may not be available for all printers.
Eco-Mode
Off
Energy
Energy/Paper
PaperMinimizes the use of energy, paper, or specialty media
Notes:
Off is the factory default...

Menu item Description
Run Initial setup
Ye s
NoRuns the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at
the Country select screen, the default becomes No.
Keyboard
Keyboard Type
English
Francais
Francais Canadien
Deutsch
Italiano
Espanol
Greek
Dansk
Norsk
Nederlands
Svenska
Suomi
Portugues
Russian
Polski
Swiss German
Swiss French
Tu r k c e
Korean
Custom Key [x]
Accents/Symbols Tab
On
Off
Russian/Polish Tab
On
Off
Korean Tab
On
OffSpecifies a...

Menu item Description
Scan to PC Port Range
[port range]Specifies a valid port range for printers behind a port blocking
firewall. The valid ports are specified by two sets of numbers
separated by a semicolon.
Note: 9751:12000 is the factory default setting.
Displayed Information
Left side
Right side
Custom Text [x]
[text entry]Specifies what is displayed on the upper left and right corners
of the home screen
For the Left side and Right side menus, choose from the
following options:
None
IP Address
Hostname...