Lexmark X 950 User Manual

Menu item Description
Network Buffer
Auto
3KB to [maximum size allowed]Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1‑KB increments.
The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buffers, and whether Resource Save is
set to On or Off.
To increase the maximum size range for the Network Buffer, disable or
reduce the size of the parallel, serial, and USB buffers.
Changing this setting...

Network Reports menu
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network Setup > Reports
or Network Reports
Menu item Description
Print Setup PagePrints a report containing information about the network printer settings, such as the TCP/IP
address
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > Network...

Menu item Description
GatewayLets you view or change the current TCP/IP gateway
Enable DHCP
On
OffSpecifies the DHCP address and parameter assignment setting
Note: On is the factory default setting.
Enable RARP
On
OffSpecifies the RARP address assignment setting
Note: Off is the factory default setting.
Enable BOOTP
On
OffSpecifies the BOOTP address assignment setting
Note: On is the factory default setting.
Enable AutoIP
Ye s
NoSpecifies the Zero Configuration Networking setting
Note: Yes is the factory...

Menu item Description
Set HostnameLets you set the hostname
Note: These settings can be changed only from the Embedded
Web Server. View Address
View Router Address
Enable DHCPv6
On
OffEnables DHCPv6 in the printer
Note: On is the factory default setting.
Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only in printer models connected to a wireless network.
The Wireless menu is available from the Network/Ports menu:...

Note: Wi-Fi Protected Setup (WPS) is a simple and secure configuration that lets you establish a wireless
network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer
necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices.
AppleTalk menu
To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
Network/Ports > Network [x] > Network [x] Setup >...

Menu item Description
PS SmartSwitch
On
OffSets the printer to automatically switch to PS emulation when a print job
received through a USB port requires it, regardless of the default printer
language
Notes:
On is the factory default setting.
When set to Off, the printer does not examine incoming data. The printer
uses PCL emulation if the PCL SmartSwitch is set to On. It uses the
default printer language 
specified in the Setup menu if the PCL
SmartSwitch is set to Off.
NPA Mode
Auto
On
OffSets the...

Menu item Description
ENA Address
yyy.yyy.yyy.yyySets the network address information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
ENA Netmask
yyy.yyy.yyy.yyySets the netmask information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
ENA Gateway
yyy.yyy.yyy.yyySets the gateway information for an external print...

Menu item Description
Parallel Buffer
Auto
3KB to [maximum size allowed]
DisabledSets the size of the parallel input buffer
Notes:
Auto is the factory default setting.
Disabled turns off job buffering. Any print jobs already buffered on the
printer hard disk are printed before normal processing resumes.
The parallel buffer size setting can be changed in 1‑KB increments.
The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buffers, and whether Resource Save...

Menu item Description
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
Off filters print jobs using the standard protocol.
On processes raw binary PostScript print jobs.
ENA Address
yyy.yyy.yyy.yyySets the network address information for an external print server
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
ENA Netmask
yyy.yyy.yyy.yyySets the netmask...

Menu item Description
NPA Mode
Auto
On
OffSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting. Auto sets the printer to examine data,
determine the format, and then processes it appropriately.
When set to On, the printer performs NPA processing. If the data is not in
NPA format, it is rejected as bad data.
When set to Off, the printer does not perform NPA processing....