Lexmark T656dne User Manual

Menu itemDescription
Job Expiration
Off
1 hour
4 hours
24 hours
1 weekLimits the amount of time a confidential job stays in the printer before it is deleted
Notes:
Off is the default setting.
If the Job Expiration setting is changed while confidential jobs reside on the
printer RAM or printer hard disk, the expiration time for those print jobs does
not change to the new default value.
If the printer is turned off, all confidential jobs held in printer RAM are
deleted.
Disk Wiping menu
Menu...

Menu itemDescription
Automatic Method
Single pass
Multiple passDisk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Automatic Wiping marks all disk space used by a previous job and does not permit
the file system to reuse this space until it has been sanitized.
Only Automatic Wiping enables users to activate disk wiping without having to...

Security Audit Log menu
Menu itemDescription
Export LogEnables an authorized user to export the security log
Notes:
To export the log from the printer control panel, a flash drive must be
attached to the printer.
From the Embedded Web Server, the log can be downloaded to a computer.
Delete Log
Delete now
Do not deleteSpecifies whether audit logs are deleted
Note: Delete Now is the factory default setting.
Configure Log
Enable Audit
Enable Remote Syslog
Remote Syslog Facility
Severity of events to...

Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
KoreanSets the language of the text appearing on the display
Note: All languages may not be available for all printers.
Eco‑Mode
Eco‑ModeMinimizes the use of energy, paper, or specialty media
Notes:
Off is the factory default setting. Off resets the printer to its...

Menu itemDescription
Run Initial setup
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Understanding printer menus125
Downloaded From ManualsPrinter.com Manuals 

Menu itemDescription
Keyboard
Keyboard Type
English
Francais
Francais Canadien
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Suomi
Portuguese
Russian
Polski
Swiss German
Swiss French
Korean
Turkce
Simplified Chinese
Traditional Chinese
Japanese
Custom Key 1
Custom Key 2
Accents/Symbols Tab
On
Off
Russian/Polish Tab
On
Off
Korean Tab
On
Off
Chinese PinyinTab
On
Off
Chinese Zhuyin Tab
On
OffSpecifies a language and custom key information for the printer
control panel keyboard. The additional tabs...

Menu itemDescription
Displayed Information
Left side
Right side
Custom Text 1

Custom Text 2

Cartridge levels on status screen
On
Off
Black Toner
Paper Jam
Load Paper
Service Errors
Display
Display
Do not display
Message to Display
Default
Alternate
Default Message

Alternate Message
Specifies what is displayed on the upper left and right corners of the
home screen
For the Left side and Right side options, choose from the following
options:
IP Address
Hostname
Contact Name
Location
Date/Time
mDNS/DDNS...

Menu itemDescription
Output Lighting
Standard Bin LED
Normal/Standby Mode
Off
Dim
Bright
Power Saver
Off
Dim
BrightSets the amount of light from the standard bin or an optional output
bin
Notes:
Dim is the factory default setting if Eco‑Mode is set to Energy
or Energy/Paper.
Bright is the factory default setting if Eco‑Mode is set to Off or
Paper.
Web Page Refresh Rate
30–300Specifies the number of seconds between Embedded Web Server
refreshes
Note: 120 seconds is the factory default setting.
Contact...

Menu itemDescription
Timeouts
Print Timeout
Disabled
1–255Sets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.
Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript...

Menu itemDescription
Print Recovery
Page Protect
On
OffLets the printer successfully print a page that may not have printed
otherwise
Notes:
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
On sets the printer to process the whole page so that the
entire page prints.
Factory Defaults
Do Not Restore
Restore NowReturns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not...