Lexmark T656dne User Manual

Menu itemDescription
Custom  Loading
Duplex
OffDetermines whether 2‑sided printing occurs for all jobs that specify
Custom  as the paper type
Notes:
Off is the factory default setting.
Custom  Loading is available only if the custom type is
supported.
Note: Duplex sets the printer default to 2‑sided printing for every print job unless 1‑sided printing is selected from Print
Properties in Windows or the Print dialog in Macintosh.
Custom Types menu
Menu itemDescription
Custom Type 
Paper
Card Stock...

Universal Setup menu
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options,
such as support for duplex printing and printing multiple pages on one sheet.
Menu itemDescription
Units of Measure
Inches
MillimetersIdentifies the units of measure
Notes:
Inches is the US factory default setting.
Millimeters is the...

Menu ItemDescription
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type AssignmentSpecifies configuration options for output bins
Notes:
Mailbox is the factory default setting.
Bins assigned the same name are automatically
linked unless Link Optional is selected.
The Mailbox setting treats each bin as a separate
mailbox.
The Link setting links together all available output
bins.
The Link Optional setting links together all available
output bins except the standard bin and only appears
when at...

Menu itemDescription
Device StatisticsPrints a report containing printer statistics such as supply information and details
about printed pages
Network Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only for network printers or printers connected
to print servers.
Network  Setup PagePrints a report containing information about the network printer settings, such
as the TCP/IP address information...

Network/Ports menu
Active NIC menu
Menu itemDescription
Active NIC
Auto
Notes:
Auto is the factory default setting.
This menu item appears only if an optional network card is installed.
Standard Network or Network  menus
Note: Only active ports appear in this menu; all inactive ports are omitted.
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default...

Menu itemDescription
Network Buffer
Auto
3K to Sets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed in 1‑K increments.
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
To increase the maximum size range for the Network Buffer, disable or
reduce the size of the parallel, serial, and USB buffers.
Changing this setting from the printer control...

Menu itemDescription
Standard Network Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink
Network  Setup
Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLinkFor descriptions and settings of the network setup menus, see the following:
“Network Reports menu” on page 107
“Network Card menu” on page 107
“TCP/IP menu” on page 108
“IPv6 menu” on page 109
“Wireless menu” on page 110
“AppleTalk menu” on page 110
“NetWare menu” on page 111
“LexLink...

Menu itemDescription
View Network Address
UAA
LAAShows the network addresses
End‑of‑Job Timeout
0‑225 secondsSets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, then the setting is saved as 10.
Banner Page
Off
OnAllows the printer to print a banner page
Note: Off is the factory default setting.
TCP/IP menu
Use the following menu items to view...

Menu itemDescription
Enable BOOTP
On
OffSpecifies the BOOTP address assignment setting
Note: On is the factory default setting.
Enable AutoIP
Yes
NoSpecifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enable FTP/TFTP
Yes
NoEnables the built-in FTP server, which allows you to send files to the printer using the
File Transfer Protocol
Note: Yes is the factory default setting.
Enable HTTP Server
Yes
NoEnables the built-in Web server (Embedded Web Server). When...

Menu itemDescription
View Hostname
View Address
View Router AddressShows the current setting
Note: These settings can be changed only from the Embedded Web
Server.
Enable DHCPv6
On
OffEnables DHCPv6 in the printer
Note: On is the factory default setting.
Wireless menu
Use the following menu items to view or configure the wireless internal print server settings.
Note: This menu is available only for models connected to a wireless network.
This menu is available from the Network/Ports menu:
Network/Ports >...