Lexmark E360dn User Manual

Menu itemDescription
Colored Texture
Smooth
Normal
RoughSpecifies the relative texture of the colored paper loaded
Note: Normal is the factory default setting.
Light Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded
Note: Normal is the factory default setting.
Heavy Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded
Note: Normal is the factory default setting.
Rough/Cotton Texture
RoughSpecifies the relative texture of the paper loaded
Note: Rough is...

Menu itemDescription
Labels Weight
Light
Normal
HeavySpecifies the relative weight of the labels loaded in a specific tray
Note: Normal is the factory default setting.
Bond Weight
Light
Normal
HeavySpecifies the relative weight of the paper loaded in a specific tray
Note: Normal is the factory default setting.
Envelope Weight
Light
Normal
HeavySpecifies the relative weight of the envelopes loaded in a specific tray
Note: Normal is the factory default setting.
Rough Envelope Weight
Light
Normal...

Paper Loading menu
Menu itemDescription
Recycled Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Recycled as the paper type
Note: Off is the factory default setting.
Bond Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify Bond
as the paper type
Note: Off is the factory default setting.
Letterhead Loading
Off
DuplexDetermines the paper loading direction for all jobs that specify
Letterhead as the paper type
Note: Off is the factory default...

Custom Types menu
Menu itemDescription
Custom Type 
Paper
Card Stock
Transparency
Rough/Cotton
Labels
EnvelopeAssociates a paper or specialty media type with a factory default Custom
Type  name or a user‑defined Custom Name created from the Embedded
Web Server or MarkVision
TM Professional
Notes:
Paper is the factory default setting.
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Recycled
Paper
Card Stock
Transparency
Rough/Cotton...

Menu itemDescription
Portrait Height
3–14.17 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Feed Direction
Short Edge
Long EdgeSpecifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears...

Menu itemDescription
Print DirectoryPrints a list of all the resources stored on an optional flash memory card
Notes:
Job Buffer Size must be set to 100%.
The optional flash memory must be installed correctly and working
properly.
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Network menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the...

Menu itemDescription
Network Buffer
Auto
DisabledSets the size of the network input buffer
Notes:
Auto is the factory default setting.
To increase the maximum size range for the Network Buffer, disable the USB
buffer.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Mac Binary PS
Auto
On
OffSets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting.
Changing this setting causes the printer to restart.
USB Buffer
Disabled
AutoSets the size of the USB input buffer
Notes:
Auto is the factory default setting.
The Disabled setting turns off job buffering. Any jobs already buffered are
printed before normal processing is resumed....

Parallel menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a parallel port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if PS
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS...

Menu itemDescription
Protocol
Fastbytes
StandardSpecifies the parallel port protocol
Notes:
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
The Standard setting tries to resolve parallel port communication problems.
Honor Init
Off
OnDetermines whether the printer honors printer hardware initialization requests from
the computer
Notes:
Off is the factory default setting.
The computer requests initialization by activating...