Lexmark E360dn User Manual

Source or processPrint side and paper orientation
Manual feeder (duplex printing) Preprinted letterhead design is placed facedown. The top edge of the sheet with the
logo should enter the manual feeder last.
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Tips on using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
Feed...

–Have windows, holes, perforations, cutouts, or embossing
–Have metal clasps, string ties, or folding bars
–Have an interlocking design
–Have postage stamps attached
–Have any exposed adhesive when the flap is in the sealed or closed position
–Have bent corners
–Have rough, cockle, or laid finishes
Adjust the width guides to fit the width of the envelopes.
Note: A combination of high humidity (over 60%) and the high printing temperature may wrinkle or seal envelopes.
Tips on using labels
Print samples on...

When printing on card stock:
Make sure the Paper Type is Card Stock.
Select the appropriate Paper Texture setting.
Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or
other paper handling problems.
Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F)
without releasing hazardous emissions.
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer....

3Release the buttons when the dots appear, and then wait for Config Menu to appear.
4Press the arrow buttons until Prt Quality Pgs appears, and then press .
The print quality test pages print.
5Press the arrow buttons until Exit Config Menu appears, and then press .
Ready appears.
Canceling a print job
Canceling a print job from the printer control panel
If the job is formatting or already printing:
1Press .
The Stopping screen appears, followed by Cancel Print Job.
2Press  to confirm the deletion.
The...

For Macintosh users
In Mac OS X version 10.5 or later:
1From the Apple menu, choose System Preferences.
2Click Print & Fax, and then double‑click the printer icon.
3From the printer window, select the job to cancel.
4From the icon bar at the top of the window, click the Delete icon.
In Mac OS X version 10.4 and earlier:
1From the Go menu, choose Applications.
2Double‑click Utilities, and then double‑click Printer Setup Utility or Print Center.
3Double‑click the printer icon.
4From the printer window,...

Understanding printer menus
Menus list
Paper Menu Reports
Default Source
Size/Type
Configure MP
Paper Texture
Paper Weight
Paper Loading
Custom Types
Universal SetupMenu Settings Page
Device Statistics
Network Setup Page
1
Print Fonts
Print Directory
Asset Report
Settings Network/Ports
General Settings
Setup Menu
Finishing Menu
Quality Menu
Utilities Menu
PostScript Menu
PCL Emul MenuActive NIC
Network Menu
2
USB Menu
Parallel Menu
1 Depending on the printer setup, this menu item appears as Network Setup...

Paper menu
Default Source menu
Menu itemDescription
Default Source
Tray 
MP Feeder
Manual Paper
Manual EnvSets a default paper source for all print jobs
Notes:
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Tray 1 (standard tray) is the factory default setting.
Only an installed paper source will appear as a menu setting.
A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
If the...

Menu itemDescription
Set Size menu for Manual Paper
A4
A5
Executive
Folio
JIS B5
Legal
Letter
Oficio (Mexico)
Statement
UniversalLets you specify the paper size loaded in the multipurpose feeder
Note: Letter is the US factory default setting. A4 is the international factory
default setting.
Set Size menu for Manual Env
7 3/4 Envelope
9 Envelope
10 Envelope
C5 Envelope
B5 Envelope
DL Envelope
Other EnvelopeLets you specify the envelope size loaded in the multipurpose feeder
Note: 10 Envelope is the US...

Menu itemDescription
Set Type menu for Tray 2
Custom Type 
Plain Paper
Card Stock
Recycled
Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/CottonLets you specify the paper type loaded in Tray 2
Notes:
Custom Type  is the factory default setting.
If available, a user‑defined name will appear instead of Custom
Type .
Use this menu item to configure automatic tray linking.
Set Type menu for Manual Paper
Plain Paper
Card Stock
Transparency
Labels
Bond
Letterhead
Preprinted...

Paper Texture menu
Menu itemDescription
Plain Texture
Smooth
Normal
RoughSpecifies the relative texture of the paper loaded
Note: Normal is the factory default setting.
Card Stock Texture
Smooth
Normal
RoughSpecifies the relative texture of the card stock loaded
Notes:
Normal is the factory default setting.
Settings appear only if card stock is supported.
Transparency Texture
Smooth
Normal
RoughSpecifies the relative texture of the transparencies loaded
Note: Normal is the factory default setting....