Lexicon Rv5 User Manual

4
Audio Controls & Video Status
Audio Controls ............................................................................4-2
Video Status ............................................................................... 4-4 

Audio Controls & Video StatusLexicon
4-2
AUDIO CONTROLS
Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the AUTOCAL settings, except for the
Audio Status parameter. 
AUTO EQOFF, ON
If the AUTOCAL process is performed and the settings are saved,
then the Auto EQ parameter identifies if the saved AUTOCAL
settings are being actively applied to the system. When the Auto EQ
parameter is OFF, the AUTOCAL settings are not applied. 
Note: When the AUTO EQ parameter...

RV-5Audio Controls & Video Status
4-3
To load a different saved EQ Preset into the system:
1. Decide which saved Preset location you want to load.
2. Select ACTIVE PS from the EQ PRESET menu.
3. Use the  or  cursors to select the Preset location you want 
to load.
4. Press the cursor to save the selection.
When the Active PS is set to “USER”, this indicates a factory default
condition.
Note: Once a Preset location has been selected and saved, the factory
default “USER” option is no longer available...

Audio Controls & Video StatusLexicon
4-4
AUDIO STATUS
The AUDIO STATUS menu is an information-only menu identifying
the current audio status of the RV-5.
 INPUT identifies the currently selected input. 
 NAME identifies the customer-chosen name, if any, for the
currently selected input. 
 CONNECTOR identifies the current audio connector in use. 
 AUDIO identifies what type of audio signal is in use. 
 MODE FAMILY identifies the currently selected mode family.
 MODE identifies the currently selected...

5
Tuner, PC, & Dock Controls
Tuner, PC, and Dock Overview ...................................................5-2
AM/FM Radio Tuner ....................................................................5-2
Zone 2 Tuner ............................................................................................ 5-2
Tuner Activation and Display .................................................................... 5-2
Tuner Controls...

Tuner, PC, & Dock ControlsLexicon
5-2
TUNER, PC, AND DOCK OVERVIEW
Unlike the other nine inputs of the RV-5 Receiver, the Tuner, PC, and
Dock inputs are NOT interchangeable. These three inputs have
specific audio-only functionality that is exclusive to these individual
inputs. The TUNER input is for use with the internal AM/FM radio
tuner and cannot be used in conjunction with any of the rear panel
audio inputs. The Tuner controls and features are discussed in the
following sections of this chapter.
The...

RV-5Tuner, PC, & Dock Controls
5-3
Note: The Tuner Input setup displays Digital Audio as NONE, Analog Audio
as TUNER, and the Dig/Anlg Auto parameter is dashed out. These three
parameters cannot be changed for the Tuner Input.
Once the Tuner is activated, the TUNER input button under the
Main Zone heading on the front panel is lit with a blue LED; the
Zone 2 TUNER input button lights with an amber LED. The front
panel of the RV-5 and the 2-line OSD display TUNER and the
current listening mode on the left...

Tuner, PC, & Dock ControlsLexicon
5-4
SAVE
Stores a radio station into a preset location. 
To Save a Radio Station to a Preset Location:
1. Tune to the station frequency and band that you want to save.
2. Press SAVE. A blinking preset number or dashed lines are 
displayed. 
Note: If nothing is pressed after the SAVE button, the preset will blink for
several seconds before the save function is cancelled.
3. Press Preset +/- or Tune +/- to scroll through the presets. 
4. Press SAVE again to save the...

RV-5Tuner, PC, & Dock Controls
5-5
USB jack on a computer or hub that has not been previously
connected to the RV-5, you will see a series of pop-up messages
from Windows to indicate that the computer is configuring itself for
the new device. Since the RV-5 provides a number of different
functions, you may see the “Found New Hardware” message up to
four times, one each for “A/V Receiver,” “Compatible Device,”
“Audio Receiver”, and “Human Interface Device.” 
CAUTION!
Do NOT power cycle the computer while...

Tuner, PC, & Dock ControlsLexicon
5-6
DOCK FUNCTIONALITY
The optional D-1 iPod Docking Station allows you to enter a new
world of listening enjoyment made possible by combining the
storage capacity and playback flexibility of an iPod® (not included)
with the sonic power of your RV-5 Receiver. Operation is easy, you
can use your RV-5 remote control or the front panel buttons to
access and control your iPod selections.  Just one simple connection
and you’re ready to go! 
Note: This functionality is ONLY...