Lexicon Rv5 User Manual

B
Appendix
Main Menu: Audio Controls ........................................................B-2
Main Menu: Video Status ............................................................B-2
Main Menu: Setup ......................................................................B-3
Setup Menu: Display Setup ....................................................................... B-4
Setup Menu: Surround Config .................................................................. B-4
Setup Menu: Speaker/EQ Setup...

Appendix BLexicon
B-2
MAIN MENU: AUDIO CONTROLS
MAIN MENU: VIDEO STATUS
AUDIO CONTROLS
EQ PRESET
PRESET 1: FACTORY
ACTIVE PS: USER
PRESET 2: FACTORY
PRESET 3: FACTORY
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
SETUPEQ ADJUST
HF SHELF: 0dB
AUTO EQ: ON
AUDIO STATUS
INPUT: HD+
NAME:
CONNECTOR: ANALOG 3
AUDIO: - - -
MODE FAMILY: LOGIC 7
MODE: MUSIC 5.1
EQ PRESET
EQ ADJUST
TONE CONTROLS: OFF
BASS: 0dB
TREBLE: 0dB
AUDIO STATUS
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
SETUP
INPUT RESOL: - - -
VIDEO STATUS
COPY...

RV-5Appendix B
B-3
MAIN MENU: SETUP
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
POWER ON SETTINGS
POWER ON VOL: -30dB
DOCK AUTO POWER: ON
INPUT SETUP 1
continued on page B-4
continued on page B-6
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
DISPLAY SETUP
CONNECTION: HDMI/DVI SETUP
continued on page B-4
SETUP
INPUT: HD
NAME: ________
DIG AUDIO: HDMI 1
ANLG AUDIO: NONE
DIG/ANLG AUTO: ON
A/D SAMPLE RATE: 48kHz MODE FAMILY: LOGIC 7
MODE: FILM 5.1
INPUT SETUP...

Appendix BLexicon
B-4
SETUP MENU: DISPLAY SETUP
SETUP MENU: SURROUND CONFIG
ON-SCREEN DISPLAY 
2-LINE OSD: 3s
MENU TIME OUT: 30s
FRONT PANEL DISPLAY
BRIGHTNESS: FULL
TIME OUT: NONE
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
SETUPSETUP
DISPLAY SETUP
CONNECTION: HDMI/DVI
HDMI AUDIO OUT: NO
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
DOLBY VIRTUAL: OFF
STEREO DOWN MIX: ON
DOLBY MULTI-CHANNEL
LOGIC 7: ON
HALL: ON
5/7...

RV-5Appendix B
B-5
SETUP MENU: SPEAKER/EQ SETUP
MANUAL
SPEAKERS
SPEAKER DISTANCES
OUTPUT LEVELS
SPEAKERS
AUTO SETTINGS: OFF
FRONT L/R: 80Hz
CENTER: 80Hz
SIDE L/R: 80Hz
REAR/Z2 L/R: 80Hz
SUB/LFE LPF: 80Hz
SUBWOOFERS: 1
SUB HPF: 20Hz
SUB MODE: NORMAL
PERFORMS FULL AUTOMATIC
CALIBRATION
PERFORMS SEMI-AUTOMATIC 
CALIBRATION
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS
DISPLAY SETUP
SPEAKER/EQ SETUP
INPUT SETUP
SURROUND CONFIG
DOLBY CONFIG
MUTE LEVELS
POWER ON SETTINGS
SETUPSETUP
SPEAKER/EQ SETUP
REAR AMP: REAR SPK...

Appendix BLexicon
B-6
SETUP MENU: INPUT SETUP
*Audio/Video Input Factory Default Settings:
**Mode Input Factory Default Settings for Each Mode Family:
INPUT TYPE: DVD
SHARPNESS: 32
NOISE REDUCTION: OFF 
X-COLOR SUPPRESS: ON
DCDi INTERPOL: ON
FILM DETECTION: ON
FILM EDIT DETECT: ON
ADVANCED VIDEO 1
A/D SAMPLE RATE: 48kHz MODE FAMILY: LOGIC 7
MODE: FILM 5.1**
INPUT SETUP 2
DEFAULT SUR: STANDARD
ADVANCED VIDEO A/V SYNC DELAY: 0 ms
TRIGGER 2: OFF
ZONE-2 OUT: ANALOG
MAIN MENU
AUDIO CONTROLS
VIDEO STATUS...

C
Appendix
Remote Control Programming ................................................... C-2
Remote Control Light Button .................................................................... C-2
Transmitting Icon...................................................................................... C-2
Setting Up the Remote Control ................................................................. C-3
Lock Feature ................................................................................................

Appendix CLexicon
C-2
REMOTE CONTROL PROGRAMMING
The RV-5 remote control is a very powerful and flexible
pre-programmed and learning remote control, designed to be the
universal controller of your home theater system. 
The RV-5 remote control can operate up to 14 home entertainment
and home automation components by using the remote control’s
pre-programmed code library, or by letting the remote control “learn”
from another remote, one button at a time. The RV-5 remote control
has many additional...

RV-5Appendix C
C-3
SETTING UP THE REMOTE CONTROL
The RV-5 remote control can be set up so that it controls all of the
components of your home entertainment system, making remote
access simple and efficient. There are two ways to set up the remote
control:
 Pre-programmed Codes - Allows you to set up all of the but-
tons at once, by entering the pre-programmed 3-digit codes of
the component manufacturers.
 Button Learning - Allows you to transfer functions from other
remotes, both old and new, one button...

Appendix CLexicon
C-4
Note: The DOWN and UP buttons on the touch screen can be used to
scroll the code number one digit at a time. If you hold your finger over
the UP or DOWN button, the code number will scroll until your finger
is removed.
8. When the component turns off, press the ON button on the
remote to turn the component back on. Test several functions to
ensure that the component responds correctly to the remote
commands. If any of the buttons do not work properly, you may
not have the right code...