Lexicon Rv5 User Manual

RV-5Setup
3-15
To Customize the Name of the Selected Input:
11. Select the input and enter the Input Setup menu.
12. Select the Name parameter. Note that a blinking square appears in
the first letter position. 
13. Using the  and  arrows, scroll through the letter list until you
find the first desired letter. 
The letter list is arranged with Uppercase letters > lowercase
letters > numbers > symbols. The letters are listed in alphabetical
order and the numbers in numerical order. Most standard ASCII...

SetupLexicon
3-16
Conv Only - Does not apply any video enhancement or processing
to the incoming video signal, but outputs the signal in one of the
following ways, depending on the input source.
 A standard-definition (480i or 576i) analog signal
(composite, S-video, or component) is converted so
that it is available as an HDMI signal at its input
resolution, as well as at the standard S-video,
composite, or component analog video outputs.   
 An analog component signal is digitized and output at
its...

RV-5Setup
3-17
DIG AUDIO
Selects the DIG AUDIO parameter, which assigns one of the rear
panel digital audio input connectors to the current input. Available
selections include NONE, Optical 1-4, Coaxial 1-4, and HDMI 1-2.
The HDMI Audio & Video inputs, HDMI 1 & HDMI 2, are mutually
exclusive inputs - only one input is available at a time for each input
location. For example, while setting up the DVD input, if HDMI 2 is
selected for the Video Input, then HDMI 1 is not a selectable option
for the Digital...

SetupLexicon
3-18
DEFAULT SURSTANDARD, USE LAST
Identifies the Default Surround Mode that is activated when a digital
source is selected.  The STANDARD parameter activates the
“standard” decoder of the source input. The USE LAST selection
allows the RV-5 software to “remember” the last used listening mode
for any given input source. Once selected, that mode will always be
active on the corresponding input until another listening mode is
selected. This parameter affects all inputs.
Note: If the LOGIC 7...

RV-5Setup
3-19
Note: If you have 5.1-channel or 7.1-channel ANALOG AUDIO assigned
to an Input using the BYPASS listening mode, only the Front Left and Front
Right channels will be sent to Zone 2 OUT with the ANALOG setting. In
this condition, DOWN MIX is not available.
The Main Zone and Zone 2 inputs are inter-related. For example,
there is only one HD input that is accessible in both the Main Zone
and Zone 2; there are NOT two separate HD inputs. Therefore, to
set the ZONE 2 OUT in a Main Zone input,...

SetupLexicon
3-20
ADVANCED VIDEO
Selecting the SETUP menu INPUT SETUP menu ADVANCED VIDEO option opens the ADVANCED VIDEO menu, a two-screen menu which
provides user-adjustable controls for sharpness, noise reduction, brightness, and other video fine-tuning.
Note: Most of the Advanced Video parameters are only available when the V-Process parameter is set to FAROUDJA.  
INPUT TYPE
Identifies the type of device being used for the input source.  Once
the selection is made, the advanced video settings will...

RV-5Setup
3-21
  Most of the following Advanced Video parameters are simple ON/OFF toggle switches that apply to each input independently.
NOISE REDUCTIONOFF, ON
Reduces the video noise often present in analog input sources.  
X-COLOR SUPPRESSOFF, ON
Reduces the cross-color interference that typically appears in
composite video sources as moire’ in finely detailed objects.  Moire’
effect is a visual perception that occurs when viewing a set of lines or
dots superimposed upon another set of lines or dots,...

SetupLexicon
3-22
FILM EDIT DETECTOFF, ON
Applies additional processing when film-based material is detected
so that any disruption in the frame sequence of film-based material
due to video edits or overlay of video text over film is compensated
for by processing, before artifacts such as feathering may appear.  
FLESHTONE NROFF, ON
Selects the Fleshtone NR (Noise Reduction) parameter, which
preserves the detail in faces and flesh tones while reducing noise in
the total picture.
COMPNT ENHANCEOFF, ON...

RV-5Setup
3-23
LISTENING MODES
The RV-5 has a large selection of listening modes to choose from. The list of available listening modes is broken into two parts - the Mode Family
and the Mode. The available listening modes vary depending upon the Mode Family selections, the input setup, and the incoming audio signal. 
The RV-5 features the ability to turn off selected listening mode families so that those options do not appear in the list of available listening modes.
See the following section, “Surround...

SetupLexicon
3-24
AVAILABLE LISTENING MODES
The following table provides a complete listing of the listening modes available for each of the incoming audio or video formats currently available.
Shaded cells indicate that there are no available modes in that Mode Family for that specific incoming data stream.
Note: The table identifies all of the possible formats, but depending upon the Input setup and the Surround Configuration of the RV-5, all of these modes may
not be available for selection....