Lexicon Rv5 User Manual

RV-5Appendix C
C-5
1. Line up the RV-5 remote control with the other remote control,
head-to-head, one or two inches apart.
2. On the RV-5 remote control, press and hold the MAIN and ENT
(Enter) buttons at the same time. After about 3 seconds, “SETUP”
is displayed in the Menu name area at the top of the LCD touch
screen. This is the Setup mode of the remote control.
NOTE: You now have 30 seconds to perform the next step while the
remote is in the Setup mode. If a button is not pressed within 30
seconds,...

Appendix CLexicon
C-6
 Learned functions override any existing pre-programmed
functions on the remote control.
 All buttons can be taught except for the menu page arrows,
MAIN button, and LIGHT button on the side of the remote.
 Learned functions are automatically erased when a new
function is learned on the same button.
 Learned functions are retained even after a different
pre-programmed 3-digit manufacterer’s code is entered and
saved to the remote.
 To return to an original pre-programmed function,...

RV-5Appendix C
C-7
Back light Time Out:
The back light feature lights the touch screen area and illuminates the
buttons whenever the LIGHT button is pressed. The amount of time
the back light remains on before timing out can be adjusted to your
preferences. Follow the instructions below to change the back light
time out setting.
1. On the remote control, press and hold the MAIN and ENT (Enter)
buttons at the same time. After about 3 seconds, “SETUP” is
displayed in the Menu name area at the top of the...

Appendix CLexicon
C-8
6. Now touch the text that you want to edit. The first letter will start
flashing with a black box. 7. Changing the text requires
the dual use of the number
keypad and the up/down/
left/right cursors. The
number keypad has
specific letters, numbers,
and symbols defined for
each key, as shown.
Pressing the  and 
cursors will scroll through
the defined characters of
each number keypad
button. Pressing the  and
 cursors changes the
position of the cursors in
the text being edited....

RV-5Appendix C
C-9
Favorite Channel Access:
To access the Favorite Channel listings, press the MAIN button to
display page 1 of the Main menu. Touch the FAV (Favorite Channel)
button on the touch screen. A list of favorite TV & cable stations is now
displayed. Each option can be set to instantly select the channel on
your TV. There are five pages of eight favorite channels for a total of
forty buttons. 
Favorite Channel Setup:
Before the Favorite Channels can be selected, they must be setup for
your home...

Appendix CLexicon
C-10
Macro Power ON Setup:
Any of the touch screen menu options can be setup as Macro buttons.
Follow the instructions below to setup a macro button that will power
ON several components at once.
1. On the remote control, press and hold the MAIN and ENT (Enter)
buttons at the same time. After about 3 seconds, “SETUP” is
displayed in the Menu name area at the top of the LCD touch
screen. This is the Setup mode of the remote control.
NOTE: You now have 30 seconds to perform the next step...

RV-5Appendix C
C-11
switch components without triggering the macro. Only holding down
the component button will trigger the macro.
To set the “Press & Hold” macro, enter a delay as the first step of the
macro by pressing the PAUSE (
||) button. Each press adds half a second
to the delay. The amount of delay determines how long the user must
hold down the button before the macro is sent.
Cloning other Lexicon RV-5 Remote Controls:
If you happen to own more than one RV-5 remote control, you can
copy and...

Appendix CLexicon
C-12
the remote control is no longer in Setup mode. If this occurs, you will
need to repeat this step to re-enter the Setup mode.
3. Touch the PUNCH option to setup the system volume control. The
menu name changes to “PUNCH” and the bottom of the screen
flashes “SELECT BUTTON”. A new screen now displays with the
options: VOL, PLAY, CH, and VOD.
4. Touch the VOL (Volume) option. The menu name changes to
“VOL” and the component options are displayed. The VOL option
sets up the group of...

RV-5Appendix C
C-13
Note: The TEXT option allows the text of each menu to be changed.
Refer to the “Customizing the Touch Screen” procedure, found earlier
in this chapter, for instructions.
3. Touch the PAGE option. The menu name changes to “PAGE” and
the component options are displayed. The bottom of the touch
screen flashes “SELECT”.
4. Navigate to the menu and page that you want to HIDE or ADD.
When you select a page, the top of the screen indicates whether
you want to “ADD?” or “HIDE?” the displayed...

Appendix CLexicon
C-14
RESTORING FACTORY DEFAULT SETTINGS
If you’re afraid you’ve accidently overwritten functions that you
wanted, or want a “clean-slate” to start from, the remote control can
be reset to its factory default settings. Follow the instructions below to
restore the factory default settings.
Note: Restoring the Factory Default Settings will ERASE all customized
features, including renamed components, learned buttons, and
macros.
1. On the remote control, press and hold the MAIN and STOP...