Land Rover Lr3 Owners Handbook 2004 Rover
Have a look at the manual Land Rover Lr3 Owners Handbook 2004 Rover online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
321 Bulb Replacement R Changing a front indicator lamp bulb 1.Twist and lift off the domed cap. 2.Pull out the bulb complete with electrical connector. 3.Pull the bulb out of the electrical connector. 4.Insert the new bulb and repeat the above procedure in reverse order. When replacing the cap, align the arrowheads on the cap and the body of the unit.Refitting the headlamp unit 1.Reconnect the wiring plug. 2.Offer up the unit into position. 3.Push down on the two locking slides. 4.Refit the grille. H5720G H5722G
Bulb Replacement 322 L REAR LAMP UNIT Note: If accessory lamp guards are fitted, refer to the separate accessory user instructions for removal. The rear lamp unit contains five lamps and it is necessary to completely remove the unit from the vehicle in order to change any of the bulbs. Removal of rear lamp unit 1.With the tailgate open, remove two screws from the edge of the unit nearer the rear door aperture. 2.Pull the unit away from the vehicle.3.Disconnect the wiring multi-plug and remove the unit from the vehicle. Place face down on a flat surface covered in a soft material to prevent damage to the unit’s lenses. Each bulb is now accessible by twisting off its electrical connection cap. See Replacement bulbs, 315. 1.Stop/tail lamp 2.Direction indicator 3.Tail lamp 4.Reversing lamp 5.Rear fog guard lamp Note: Tail lamp (3) uses the same twin-filament bulb as stop/tail lamp (1). H5723G 1 2 3 4 5 H5724G
323 Bulb Replacement R Refitting the rear lamp unit 1.Reconnect the electrical multi-plug. 2.Locate the unit’s two studs in the sockets at the left-hand side of the mounting face. 3.Insert and tighten the two screws on the right-hand side of the unit. 4.Check that all of the bulbs work.NUMBER PLATE LAMPS With the upper tailgate open and using a suitable tool, lever the lens from the tailgate (see inset). Pull the bulb to remove. H5726G
Bulb Replacement 324 L SIDE MARKER LAMP Push the lens firmly towards the front of the vehicle and withdraw the lamp unit from the wing. Twist to release the bulb holder from the lens unit, then pull the bulb from its socket. FRONT FOG LAMPS To access the bulb; using a suitable tool, lever the fog lamp surround panel out of the front bumper. Remove the three securing screws to release the lamp unit. Ease the unit out of the front bumper. H5727G H5728G
325 Bulb Replacement R Twist and pull to remove the bulb holder from the lens assembly then depress the two catches (solid arrows in upper inset) and pull the bulb from the holder to remove. Before fitting the replacement bulb, note the ’flat’ and the tab on the otherwise circular shape of the bulb mounting flange. The tab acts as a key to enable correct positioning of the bulb in the bulb holder. Note: Do not touch the bulb glass with your fingers. If necessary, clean the bulb with methylated spirits. After the replacement of a fog lamp bulb, the alignment of the lamp should be checked by a Land Rover Retailer. DOOR/PUDDLE/FOOTWELL LAMPS * With the relevant door open, insert a small flat-bladed screwdriver under the forward edge of the lens. to lever the lamp unit out of the door. Pull the bulb to remove.H5729G H5730G
Bulb Replacement 326 L COURTESY LAMPS* Insert a small flat-bladed screwdriver into the indent on the side of the lens and carefully prise the lens from the lamp unit. Pull the bulb to remove. TAILGATE LAMP Insert a small flat-bladed screwdriver under the lens and carefully prise the lens from the lamp unit. Pull the bulb to remove. H5733G H4081
327 Bulb Replacement R MAP LAMP Insert a small flat-bladed screwdriver into the indent on the side of the lens and prise the lens from the lamp unit. Pull the bulb out to remove it. VANITY MIRROR LAMP* With the vanity mirror cover open, use a small flat-bladed screwdriver to lever the relevant lens from the mirror/lamp unit. Pull the bulb to remove. H5734G H5735G
Bulb Replacement 328 L MIRROR DOWNLIGHTER Use a small flat-bladed screwdriver to lever the lens from the mirror/lamp unit. Twist the bulb holder to reveal the bulb. H5736G
Technical Data R 329 Lubricants & Fluids LUBRICANTS AND FLUIDS . . . . . . . . . . . .331 Capacities CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . 333 Engines ENGINES . . . . . . . . . . . . . . . . . . . . . . . . . . 334 Electrical System ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . 335 Steering STEERING . . . . . . . . . . . . . . . . . . . . . . . . . 336 Wheels & Tires WHEELS & TIRES . . . . . . . . . . . . . . . . . . . 337 TIRE PRESSURES . . . . . . . . . . . . . . . . . . . 338 Vehicle Weights VEHICLE WEIGHTS . . . . . . . . . . . . . . . . . . 340 Dimensions DIMENSIONS . . . . . . . . . . . . . . . . . . . . . .341 Towing TOWING WEIGHTS . . . . . . . . . . . . . . . . . . 342