Kyocera TASKalfa 552ci User Manual

Copying Functions
4-29
4
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high 
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then [EcoPrint].
4Press [On].
5Press [OK].
6Press the Start key to start copying.
Single Color Copy
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies...

Copying Functions
4-30
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with One touch Image Adjust (see page 4-33).
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust color balance.
1Press Copy key.
2Place the originals on the...

Copying Functions
4-31
4
Hue Adjustment
Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a 
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
•All: Adjust hue for all colors.
•Yellow - Green & Blue - Magenta: Adjust color
balance for yellow and green, and blue and magenta.
•Green - Cyan & Magenta - Red: Adjust color balance
for green and cyan, and magenta and red.
•Cyan - Blue & Red - Yellow:...

Copying Functions
4-32Example 1
Select [Yellow - Green & Blue - Magenta], and 
press [ ] to adjust yellow closer to green, and blue 
closer to magenta.
Example 2
Select [Cyan - Blue & Red - Yellow], and press [ ] 
to adjust yellow closer to red , and blue closer to 
cyan.
5Press [OK].
6Press the Start key. Copying begins.
Yellow
Green
Blue Red
Magenta Cyan
Yellow
Green
Blue Red
Magenta Cyan
Downloaded From ManualsPrinter.com Manuals 

Copying Functions
4-33
4
One-touch Image Adjust
Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull, Sharp, Smooth, Light, Dark
Refer to the sample image in Quick Guide to Adjusting Image Quality for examples of the effect of each setting.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with Color Balance Adjust (see...

Copying Functions
4-34
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies 
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such 
as magazine photos, in which moire
* patterns appear, edge softening and weakening of the moire effect can be 
obtained by setting the sharpness toward [Unsharpen].
* Patterns that are created by irregular distribution of halftone dots.
Refer to the...

Copying Functions
4-35
4
Background Density Adjust
Lightens the background of color originals with dark 
backgrounds.
NOTE: This feature is used with full color and auto 
color copying. Background Density Adjust is disabled 
during auto color copying when the a black & white 
original has been detected.
Follow the steps below to use background density adjust.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press 
[Background Density Adj.].
4Press [On].
5Press...

Copying Functions
4-36
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be 
scanned in separate batches and then copied as one job. With this function, originals are scanned until you 
press [Scan Finish].
Any of the following settings can be changed during scanning.
If you use Job Build, you can insert a blank paper during scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is...

Copying Functions
4-37
4
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations 
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-22.
The procedure for making copies using Auto Image Rotation is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then...

Copying Functions
4-38
Mirror Image
Copies the mirrored image of the original.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make mirror image copies.
1Press the Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Mirror Image].
4Press [On] to select Mirror Image.
5Press [OK].
6Press the Start key to start copying.
Downloaded From ManualsPrinter.com Manuals