Kyocera TASKalfa 300i User Manual

Preparation before Use
2-33
2
Original size indicator plates
(Inch models)
(Metric models)
3Close the original cover.
IMPORTANT:  Do not push the original cover forcefully 
when you close it. Excessive pressure may crack the 
platen glass.
NOTE: Shadows may be produced around the edges 
and in the middle of open-faced originals.
CAUTION: Do not leave the document processor open 
as there is a danger of personal injury.
Downloaded From ManualsPrinter.com Manuals 

Preparation before Use
2-34
Loading Originals in the Document Processor
The optional document processor automatically scans each sheet of multiple originals. Both sides of two-sided 
originals are scanned.
Part Names of the Document Processor
(1) Original placement indicator
(2) Top cover
(3) Original width guides
(4) Original table
(5) Original eject table
(6) Original stopper
(7) Opening handle
Originals Supported by the Document Processor
The document processor supports the following types of...

Preparation before Use
2-35
2
How to Load Originals
IMPORTANT: Before loading originals, be sure that there are no originals left on the original eject table. 
Originals left on the original eject table may cause the new originals to jam.
1Adjust the original width guides to fit the originals.
2Place the originals. Put the side to be scanned (or 
the first side of two-sided originals) face-up. Slide 
the leading edge into the document processor as 
far as it will go. The origin al placement indicator...

Preparation before Use
2-36
Downloaded From ManualsPrinter.com Manuals 

3-1
3 Basic Operation
This chapter explains the following operations.
• Login/Logout .............. .........................................................................3-2
• Enter key and Quick No. Search key ..... .............................................3-2
• Touch Panel Display ...........................................................................3-4
• Original Preview .............. ........................................................ ............3-5
• Copying...

Basic Operation
3-2
Login/Logout
If user login administration is enabled, it is necessary to enter the login user name and password to use the 
machine.
NOTE: You will be unable to login if you forget your login us er name or login password. In this event, login with 
administrator privileges and change your login user name or login password.
Login
1If the screen shown appears during operations, 
press [Login User Name].
Press [# Keys] to enter the login data using the 
numeric keys.
2Enter the login...

Basic Operation
3-3
3
Enter key and Quick No. Search key
This section explains how to use the Enter key and Quick No. Search  key on the operation panel.
Using the Enter ( ) key
The Enter  key works in the same way as keys displayed on the touch panel, such as [OK] and [Close].
The Enter symbol ( ) is displayed next to the keys whose operations are carried out by the  Enter key (e.g. 
[  OK], [ Close]).
The operation of the  Enter key is explained below using copy paper se lection as an example. For...

Basic Operation
3-4
Touch Panel Display
Display for Originals and Paper
The touch panel displays the selected paper source and output tray.
Cancel
Copy Image
Copies
Image Quality
Org./Paper/
Finishing
Quick Setup Layout/Edit Advanced
Setup
Status 08/08/2009    10:10
Shortcut 1
Shortcut 4 Shortcut 3 Shortcut 2
Shortcut 6 Shortcut 5
Letter
Original
Zoom
Paper 100%
:
:
: Letter
Staple
Off
2 in 1
Combine
2-sided
>>2-sided
Duplex Normal 0
Density
Paper
Selection
Auto
Zoom
100%
Press Start key to start...

Basic Operation
3-5
3
Original Preview
You can display a preview image of the scanned document on the panel.
NOTE: To view a preview of an image stored in a Custom Box, refer to Previewing Documents/Checking 
Document Details on page 3-37 .
The procedure for previewing scanned originals is explained below.
The procedure described here is for copying a single-page original.
1Press the Copy key and place the original on the 
platen.
2Press [Preview].
3The machine starts scanning the original. When...

Basic Operation
3-6
Copying
Follow the steps as below for basic copying.
1Press the Copy key when the  Copy key/indicator 
is off.
NOTE: If the touch panel is turned off, press the 
Energy Saver  key or the Power key and wait for the 
machine to warm up.
2Place the originals on the platen or in the optional 
document processor.
NOTE: For loading instructions, refer to  Loading 
Originals on page 2-32.
3Check that [Auto] is selected of  Paper Selection on 
the touch panel. Paper that matches the size of...